
• To mount the hood, align the white dot on the hood with the white dot (NOT the vertical line) on the lens and rotate the hood clockwise until you hear and feel it click in place.• To remove the hood, grasp it firmly near its base and turn counter clockwise• You can store the hood in its reverse position for easy transport. Reverse the hood so that it covers the lens barrel and again align the white dot on the hood with the white dot on the lens and rotate the hood clockwise until you hear and feel it click in place.CONTACT
LENS HOOD N OT E S
Elite Brands Inc. Rokinon Division New York, NY 10005rokinon.com facebook.com/rokinonlensesROKINON® is a registered trademark of Elite Brands Inc.©2016, Elite Brands Inc., New York, NY 10005Toll Free: 800.441.1100Phone: 212.947.7100support@rokinon.comCLEANING
Please note: It is extremely important before cleaning to dust off the lens surface using a lens blower or a soft brush to remove any foreign particles or grit that could scratch the lens.• Using a clean microfiber lens cloth, gently wipe the lens in a circular motion from the center outwards towards the edges of the glass.• If stubborn spots remain, put only one or two small drops of ethanolor reputable lens cleaner on the microfiber cloth and repeat the circular cleaning process. DO NOT USE AN ORGANIC SOLVENT SUCH
AS PAINT THINNER, ALCOHOL, OR BENZENE.
MODEL SP 85mm F1.2CanonF1.2~1628.52°
18.98°
MOUNT
ANGLE OF VIEW
F ULL F RAME
APS-C
PRODUCT SPECIFICAT IONS
- The minimum focus is the distance from the image sensor to the object.- The product specifications and design are subject to change without notice.APERT URE RANGE
e
10 elements in 7 groups(Including an Aspherical, 2 High Refractive Index) 31” (0.8m)x 0.1386mm9OPT ICAL CONST RUCT ION
MINIMUM FOCUSING DISTANCE
MAXIMUM SHOOT ING MAGNIFICAT ION
F ILT ER SI ZE
NUMBER OF APERTURE BLADES 3.66” x 3.87” (93mm x 98.4mm)37.0oz (1,050g)MAXIMUM DIAMETER X LENGT H
WEIGHT
The supplied hood is designed specifically for the Rokinon SP 85mm F1.2 lens for optimum effectiveness. It should be used at all times to, provide better contrast and added protection. The only exception is if it blocks the light from a built-in or small electronic flash to cause a shadow at the bottom of the image.Hood stored in reverse positionINCLUDED COMPONENTS
• Front lens cap • Rear lens cap • Lens hood• Soft lens pouch • Instruction manual • Warranty