Tamron A036 User manual

TLM-A036-T/T-1712-01
* The Marking is a directive conformity mark of the European Community (EC).
* Das -Zeichen entspricht der EC Norm.
* La marquage est un marquage de conformité à la direcive CEE (CE).
* La marca es marca de conformidad segun directiva de la Comunidad Europea (CE).
* Il marchio attesta la conformita alla directtiva della Comunità Europea (CEE).
* 标志表示符合欧州共同体(EC)指标
The EEC Conformity Report applies to the Council
Directive 2014/30/EU, 2011/65/EU and is used by
Tamron Co., Ltd., manufacturer of this product.
󱦯
󱦱
Sony
11
10
10
35
25
3
5
󱦵󱦳
󱦷
9
7
8
6
4
5
2
1
3
Focusing
Zooming
Model:
A036
Owner’s manual
28-75mm F/2.8 Di
III
RXD
For Sony Full-frame mirrorless

ENGLISH
Disposal of Electrical and Electronic Equipment in Private Households.
Disposal of used Electrical & Electronic Equipment (Applicable in the
European Union and other European countries with separate collection
systems)
This symbol indicates that this product shall not be treated as household waste.
Instead it shall be collected separately for the recycling of electrical and
electronic equipment.
If the new products are purchased, this product might be handed over to the distributor or
the collection system of waste electrical and electronic equipment eventually.
By ensuring this product is disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which could otherwise be caused by
inappropriate waste handling of this product or components of this product.
If this product is disposed illegally, it might cause a possibility of penalties. For more detailed
information about recycling of this product, please contact your local Civic Ofce, your
household waste disposal service or the shop where you purchased the product.
Thank you for purchasing the Tamron lens as the latest addition to your photographic equipment.
Before using your new lens, please read the contents of this Owner’s Manual thoroughly to
familiarize yourself with your lens and the proper techniques for creating the highest quality
images possible. With proper handling and care, your Tamron lens will give you many years of
photographing beautiful and exciting pictures.

Explains precautions that help to prevent problems.

Explains things you should know in addition to basic operations.
PART NAMES (Refer to Fig. 󱦯)
① Lens hood ② Hood attaching alignment mark
③ Hood locking mark ④ Filter ring
⑤ Hood release mark ⑥ Zooming ring
⑦ Focal length scale ⑧ Focal length mark
⑨ Focus ring ⑩ Lens attachment mark
⑪ Lens-camera interface contacts
MAIN SPECIFICATIONS
Model A036
Focal Length 28-75 mm
Maximum Aperture F/2.8
Angle of View 75
˚ 23 ' - 32 ˚ 11 '
Lens Construction 12/15
Minimum Object Distance（MOD）0.19 m (7.5
" ) (Wide) / 0.39 m (15.4 " ) (Tele)
Maximum Magnication Ratio 1:2.9 (Wide MOD) / 1:4 (Tele MOD)
Filter Size
ø 67 mm
Length 117.8 mm (4.6
" )
Diameter
ø 73 mm
Weight 550 g (19.4 oz)
Lens Hood HA036

Length: From lens front to mount surface.

Features and appearances of lenses listed in this owner's manual are subject to change without
notice.
ATTACHING AND REMOVING THE LENS
Remove the rear cap of the lens. Align the lens attachment mark ⑩ and mounting mark on the
camera, and then insert the lens.
Turn the lens clockwise until it locks.
To remove the lens, turn the lens in the opposite direction while pressing the lens release button
on the camera.

Turn off the power of the camera before attaching or removing the lens.

For details, please read the instruction manual of your camera.
SWITCHING FOCUS MODE (Ref. Figs. 󱦯, 󱦱)
Select the desired focus mode on the camera.
For manual focusing, turn the focus ring
⑨ to acquire the desired focus.
For details, please read the instruction manual of your camera.

In AF mode, it may be difcult for autofocus to work depending on the subject.
ZOOMING (Ref. Figs. 󱦯, 󱦱)
Turn the zooming ring ⑥ to adjust the focal length (Zoom position) to a desired position.
LENS HOOD (Ref. Figs. 󱦯, 󱦳- 󱦷)
A bayonet-type lens hood ① is provided as standard equipment.
We recommend shooting with the hood properly attached because the lens hood eliminates stray
light that may affect the picture.
 Using the lens hood (Ref. Figs. 󱦳 , 󱦵 )
Align the hood attaching alignment mark ② of the hood with the hood release mark ⑤ of the
lens.
Rotate the hood
① in the direction of the arrow until the hood locking mark ③ meets the hood
release mark
⑤ .
 Stowing the lens hood (Ref. Fig. 󱦷 )
You can stow the lens hood ① by attaching it in reverse.
Align the hood locking mark
③ of the hood with the hood release mark ⑤ of the lens.
Rotate the hood
① in the direction of the arrow until the hood attaching alignment mark ②
meets the hood release mark
⑤ .

Be aware that the perimeter of the photographed image may be darkened if the hood ① is not
attached properly.
PRECAUTIONS WHEN SHOOTING

An internal focusing (IF) system is employed to shorten the minimum focus distance. Because of
this, the angle of view may be wider than that of lenses using other focusing systems when
shooting at a distance closer than innity.

When using the ash, remove the lens hood and stand as far as possible from the subject.
Depending on the lens and ash used, the lens may block the light from the ash and darken the
bottom of the screen.

Differences in the display systems of cameras may result in the display of values different from
the maximum and minimum aperture values in the specications. This is not an indication of an
error.
TO ENSURE LONG-TERM SATISFACTION

Remove dust and soiling on the lens by using a blower or soft brush. Do not touch the lens with
your ngers.

To clean the lens surface, lightly wipe it starting from the center with a commercially available
lens cleaning paper, a clean cotton cloth or a microber cloth (cleaning cloth for glasses, etc.)
soaked in lens cleaner. Do not use a silicone cloth.

Clean the lens barrel using a silicone cloth. Never use benzene, thinner, or other organic
solvents.

The front element has been coated to prevent water and oily substances from adhering. Since it
will repel water, do not use lens cleaners or other substances but only a dry cloth to clean the
front element.

Mildew is a major problem for lenses. Store your lens in a clean, cool, and dry place. When you
store the lens in a lens case, store it with a commercially available drying agent and replace the
drying agent occasionally.

Do not touch the lens-camera interface contacts. If dust or stains cause contact problems,
signals are not transmitted properly between the lens and camera, and malfunctions may occur.

If the temperature changes suddenly, moisture may form within the camera and lens and cause
malfunctions.
To prevent this, seal your equipment in a plastic bag or similar container. After your equipment
has adjusted to the ambient temperature, remove it from the bag and use it as usual.

For safe operation be sure to carefully read the "Precautions for Safe Use of Tamron Lenses" and the
manual before using the product.
After reading them, store them in a place where they can easily be reviewed whenever needed.
Caution instructions are divided into the following two categories according to the degree of danger
involved.
Do not view the sun or other strong light source directly through the lens or through a camera
while using this lens.
Doing so could cause loss of vision, damage to the lens and/or the camera, and possibly cause
the lens and/or camera to ignite.
Do not dissemble, repair, or modify the lens.
This could damage the lens or camera.
Keep the lens out of the reach of small children.
There is a risk of injury if the lens is dropped or falls down.
TPL-EN-Lens-T-1701
This indicates instructions which if not followed or if performed
incorrectly could lead to death or serious injury.
Precautions for Safe Use of Tamron Lenses
ENGLISH
WARNING
Do not place lens in direct sunlight or leave it in an extremely hot place such inside a car. Doing such
could damage the internal parts of the lens or cause a fire.
Always attach the lens cap whenever the lens is not in use.
When attaching the lens to the camera, ensure that the lens has been properly attached to the
camera and firmly locked.
If the lens is not attached properly, it could be difficult to remove or it could fall off causing damage
or injury.
Do not use this lens for any application other than photography.
Do not transport the lens while it is still attached to a tripod.
This indicates instructions which if not heeded or if performed
incorrectly could lead to bodily injury or physical damage
CAUTION