Roksan Audio DARIUS S1 User manual

SPEAKER CONTENTS
STAND CONTENTS
INTRODUCTION
1High Frequency Tweeter
2 Low Frequency Woofer
3Rear Firing Port x 2
4 Product Serial Number
5 Tweeter Input Terminal
6 Woofer Input Terminal
DO NOT USE ABRASIVES OR SOLVANTSDO NOT WIPE OR PRESS TWEETER DOME
OR WOOFER
Always switch the Ampliers OFF before attempting to connect or discon-
nect the speaker cables to/from your speaker. Failure to do this may cause
permanent damage to the amplier and/or speakers.
A nal adjustment and leveling of the speakers/spikes should be carried out
after the optimum position/location of the speakers in the room is estab-
lished.
Roksan ‘Darius S1’ loudspeakers should be put 30-40cm (distance from the
back of the cabinet) in front of the wall
Your Darius S1 speaker requires at least 48 hrs of continuous music
programme at reasonable volume to allow the various moving parts of the
drive units and other component to ‘burn-in’. After this period has elapsed,
the bass will increase in weight, denition, extension speed and articulation
whilst the treble will sound more open, coherent and tactile.
BI- WIRING
NOTE: ‘Jump-bars’
CONNECTED
NOTE: ‘Jump-bars’
REMOVED
Jubilee Close Townsend Lane London NW9 8TR
T: [phone] F: [phone]
E: [e-mail] W: www.roksan.co.uk
NOTE: ‘Jump-bars’
REMOVED
ROKSAN DARIUS S1-Specification
Tweeter G2N Aurum Cantus, high fidelity, aluminum ribbon tweeter, fast transient
type
Woofer5” Customised highfidelity woofer, optimallytuned
Crossover
Mundorf high quality components, air core baked inductors, polypropylene
low inductance capacitors, metal-oxide resistors.
Pin to pin soldered, elements for tweeter and woofer are located on
separate plates, silver coated cabling
Enclosure
High quality MDF material, internally reinforced, braced and decoupled,
filled with wool, coated withpiano lacquer
Input power [W] 40-200 (recommended)
Sensitivity [dB]89
Frequency response [Hz]47-30000 (-3dB at edges)
Impedance[O] 4
Dimensions [mm]376 x 200 x 376 (length x widthx depth)
Net weight [kg]13.4
ColorsBlack, White
ROKSAN WARRANTY REGISTRATION
Call: [phone]
VISIT
http://www.roksan.co.uk/rw.php
BI- AMPING
Darius User Manual X A3.indd 1 24/10/2013 11:29:59

CAUTION
1High Frequency Tweeter
2 Low Frequency Woofer
3Rear Firing Port x 2
4 Product Serial Number
5 Tweeter Input Terminal
6 Woofer Input Terminal
DO NOT USE ABRASIVES OR SOLVANTSDO NOT WIPE OR PRESS TWEETER DOME
OR WOOFER
Always switch the Ampliers OFF before attempting to connect or discon-
nect the speaker cables to/from your speaker. Failure to do this may cause
permanent damage to the amplier and/or speakers.
A nal adjustment and leveling of the speakers/spikes should be carried out
after the optimum position/location of the speakers in the room is estab-
lished.
Roksan ‘Darius S1’ loudspeakers should be put 30-40cm (distance from the
back of the cabinet) in front of the wall
Your Darius S1 speaker requires at least 48 hrs of continuous music
programme at reasonable volume to allow the various moving parts of the
drive units and other component to ‘burn-in’. After this period has elapsed,
the bass will increase in weight, denition, extension speed and articulation
whilst the treble will sound more open, coherent and tactile.
speaker - Stand Assembly
Roksan Audio Limited Jubilee Close Townsend Lane London NW9 8TR England United Kingdom
Tel: [phone] Fax: [phone] Email: [email protected] Web: www.roksan.co.uk
Registered in England Number: 3089229 VAT: 719 3079 23 Director: T Hashemi
ROKSAN DARIUS S1 - Specification
Tweeter High fidelity, aluminum ribbon tweeter, fast transient type
Woofer 5” Customised high fidelity woofer, optimally tuned
Crossover
Mundorf high quality components, air core baked inductors, polypropylene
low inductance capacitors, metal-oxide resistors.
Pin to pin soldered, elements for tweeter and woofer are located on
separate plates, silver coated cabling
Enclosure High quality MDF, internally reinforced, braced and decoupled, filled
with wool, coated with piano lacquer
Input power [W] 40-200 (recommended)
Sensitivity [dB] 89
Frequency response [Hz] 47-30000 (-3dB at edges)
Impedance [O] 4
Dimensions [mm] 376 x 200 x 376 (length x width x depth)
Net weight [kg] 13.4
Colors Black, White
All specifications are liable to change without notice. E&OE
ROKSAN WARRANTY REGISTRATION
Call: [phone]
VISIT
http://www.roksan.co.uk/rw.php
SPECIFICATION
Jubilee CloseTownsend Lane London NW9 8TR
T: [phone] F : [phone]
E: [e-mail] W: www.roksan.co.uk
Darius User Manual X A3.indd 2 24/10/2013 11:30:00