Roland NAJA 7769-2 User manual

Page 1 of 2
Made in VietNam
Thank you for purchasing this quality product. Be sure to check all packing material carefully for small
parts,which may have come loose inside the carton during shipment. Identify and count all parts and
compare with the HARDWARE LIST below.
Caution:Please read instructions thoroughly before unpacking assembly parts.
1.We recommend that you assemble this product with the assistance of another person; this will make assembly
easier, and will help to eliminate damage to the product or injury to persons during assembly.
2.Please put all parts on a non-abrasive floor before assembly,and follow the assembly steps to assemble your newly
purchased product correctly and efficently.
Assembly Instructions
NAJA 7769-2 TRIANGLE CNT TBL SKU#43277690
A
NO. PARTS LIST Q' TY
B
1
3
HARDWARE LIST
Allen wrench (4mm)
1
1
3
Q' TY
NO.
Flat washer Ø 5/16" *Ø19mm*1.5mm
Allen Bolt Ø 5/16" * 18 * 20mm
Spring washer Ø 5/16" *Ø13mm * 1.5mm
C
D1
Table Top
Leg
Clear tempered glass
STEP/PASO:1
1
4Plastic Inhaler
1
Shelf
Flat washer Ø 1/4" *Ø16mm*1.5mm
Allen Bolt Ø 1/4" * 18 * 18mm
23
6
2
3
C
B
B
B
This product is manufactured by NAJA for ROOMS TO GO
Hardware pack Location(s): NAJA 7769-2 TRIANGLE CNT TBL SKU#43277690
3.Do not tighten all bolts until the assembly is completed.
Assemble the shelf with the table leg.
TOOLS REQUIRED (NOT PROVIDED)
Description Sketch
Phillips screwdriver
B
C
Spring washer Ø 1/4" *Ø11mm * 1.5mm

Page 2 of 2
Made in VietNam
Assembly completed
STEP/PASO:2
STEP/PASO:3
COMPLETED
4
A
C
B
D
Assembly Instructions
NAJA 7769-2 TRIANGLE CNT TBL SKU#43277690
This product is manufactured by NAJA for ROOMS TO GO
Hardware pack Location(s): NAJA 7769-2 TRIANGLE CNT TBL SKU#43277690
1
3
B
B
Assemble the shelf and leg with the table top.
Use the plastic Inhaler to put
the glass into the table top
Adjust leveler =3pcs
B