rollease acmeda AUTOMATE ARC Motion Sensor User manual

AUTOMATE™
ARC Motion Sensor Instructions
433 MHZ
BI-DIRECTIONAL
FEATURES:
• Compatible with AUTOMATE awning motors and controllers
• Suitable for fitting to awning terminal bars
• Provides protection from excessive wind gusts
• 9 x levels of sensitivity
• Low battery warning
The ARC Motion Sensor is used to detect motion on a shade. The result of strong vibration
can trigger a paired awning motor to move the shade to its home position for protection.
The motion sensor can only be programmed to operate External Motors (15Nm and
upwards).
MT02-0301-xxx002_PRGM_v3.0_AUGUST2019

2 | Automate™Programming Instructions | Motion Sensor ROLLEASE ACMEDA
CONTENTS
1 SAFETY INSTRUCTIONS 3
2 OVERVIEW 4
2.1 Dimensions 4
2.2 Cover Removal 4
2.3 P2 Button & Sensitivity Dial 5
2.4 Sensitivity Dial Adjustment 5
3 FUNCTION 6
3.1 Sensitivity Dial / P2 Operation 6
3.2 Pairing to Motion Sensor 6
3.3 Use Sensor as Remote 7
3.4 Active Mode 7
3.5 Inactive Mode 7
4 TROUBLE SHOOTING 8
1.01in
26mm
5.91in
150mm
1.60in
41mm
0.31in
8mm
0.18in
4.60mm
0.63in
16mm
4.21in
107mm
1.22in
31mm
0.54in
13.60mm
4.53in
115mm
1
4
3
2
8
5
6
7
REV. DESCRIPTION DRAWN DATE
ITEM NO. DESCRIPTION
QTY.
1
Motion Sensor Cover 1
2
Motion Sensor Bracket 1
3
Motion Sensor Cradle 1
4
AAA Battery 2
5
Screw, Self Tapping, Phillips, Pan Head, #6 x 3/4" 2
6
Screw Wall Plug 2
7
Disc Magnet 1
8
Installation Instructions 1
C
ROLLEASE
ACMEDA
DIMENSIONS
IN "MM"
SCALE:1:1
SIZE:
A3
PROPRIETARY & CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF
ROLLEASE ACMEDA. ANY REPRODUCTION IN PART OR WHOLE WITHOUT THE
WRITTEN PERMISSION OF ROLLEASE ACMEDA IS PROHIBITED.
ITEM CODE:
PRODUCT SPECIFICATION SHEET
17 Jul 2018 DRAWN:
www.rolleaseacmeda.com
ITEM DESCRIPTION:
ARC Motion Sensor
MT02-0301-072002
REV.
01
1. Motion Sensor Cover
2. Motion Sensor Bracket
3. Motion Sensor Cradle
4. AAA Battery x2
5. Screw x2
6. Wall Mount x2
7. Disc Magnet
8. Instructions
KIT COMPONENTS

3 | Automate™Programming Instructions | Motion Sensor ROLLEASE ACMEDA
1 SAFETY INSTRUCTIONS
WARNING: Important safety instructions to be read before installation and use.
Incorrect installation or use can lead to serious injury and will void manufacturer’s liability and warranty.
It is important for the safety of persons to follow the enclosed instructions. Save these instructions for future reference.
• Do not expose to water, moisture, humid and damp environments or extreme temperatures.
• Persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge
should not be allowed to use this product.
• Use or modification outside the scope of this instruction manual will void warranty.
• Installation and programming to be performed by a suitably qualified installer.
• Follow installation instructions.
• For use with motorized shading devices.
• Keep away from children.
• Frequently inspect for improper operation. Do not use if repair or adjustment is necessary.
• Keep clear when in operation.
• Replace battery with correctly specified type.
Rollease Acmeda declares this equipment is in compliance with the essential requirements and other relevant provisions of
Radio Equipment Directive 2014/53/EU.
Statement Regarding FCC / IC Compliance
This device complies with Part 15 of the FCC Rules / Industry Canada license-exempt RSS standard(s). Operation is subject to
the following two conditions:
1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est
autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter
tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to
operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off an on, the user is encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help
Do not dispose of in general waste.
Please recycle batteries and damaged electrical products appropriately.

4 | Automate™Programming Instructions | Motion Sensor ROLLEASE ACMEDA
1 STATIC TITLE
1.01in
26mm
5.91in
150mm
1.60in
41mm
0.31in
8mm
0.18in
4.60mm
0.63in
16mm
4.21in
107mm
1.22in
31mm
0.54in
13.60mm
4.53in
115mm
1
4
3
2
8
5
6
7
REV. DESCRIPTION DRAWN DATE
ITEM NO. DESCRIPTION
QTY.
1
Motion Sensor Cover 1
2
Motion Sensor Bracket 1
3
Motion Sensor Cradle 1
4
AAA Battery 2
5
Screw, Self Tapping, Phillips, Pan Head, #6 x 3/4" 2
6
Screw Wall Plug 2
7
Disc Magnet 1
8
Installation Instructions 1
C
ROLLEASE
ACMEDA
DIMENSIONS
IN "MM"
SCALE:1:1
SIZE:
A3
PROPRIETARY & CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF
ROLLEASE ACMEDA. ANY REPRODUCTION IN PART OR WHOLE WITHOUT THE
WRITTEN PERMISSION OF ROLLEASE ACMEDA IS PROHIBITED.
ITEM CODE:
PRODUCT SPECIFICATION SHEET
17 Jul 2018 DRAWN:
www.rolleaseacmeda.com
ITEM DESCRIPTION:
ARC Motion Sensor
MT02-0301-072002
REV.
01
2 OVERVIEW
2.2 COVER REMOVAL
2.1 DIMENSIONS

5 | Automate™Programming Instructions | Motion Sensor ROLLEASE ACMEDA
0
1
2
3
8
7
4
9
6
5
0
1
2
3
8
7
4
9
6
5
0
1
2
3
8
7
4
9
6
5
0
1
2
3
8
7
4
9
6
5
Sensitivity dial
Motion Sensor Cradle
P2
0
1
2
3
8
7
4
9
6
5
2.4 SENSITIVITY DIAL ADJUSTMENT
2.3 P2 BUTTON & SENSITIVITY DIAL

6 | Automate™Programming Instructions | Motion Sensor ROLLEASE ACMEDA
1 STATIC TITLE
When battery voltage is lower than 2.3 V, it beeps every 5 seconds.
Adjust sensitivity accordingly. The detected vibration range is 3G. (1G = 9.8 m/s2)
High sensitivity could cause awning to react under slight wind.
If the disc magnet is dislodged, the vibration detection and low battery alarm functions are invalid.
• Dial Set to 0: Sensor is in pairing mode. Use P2 to pair to motor with existing pre-paired remote.
• Dial Set to 1-9: In Active mode, sensitivity, Highest - Lowest.
• Dial set to 5: Move motor to upper limit/Motion Sensor in Active mode.
• Dial set to 9: Move motor to bottom limit/ Motion Sensor in Inactive mode.
1. Set Sensitivity Dial to zero
2. Pair or unpair a motor to the sensor
using a pre-paired remote
3.1 SENSITIVITY DIAL / P2 OPERATION
3.2 PAIRING TO MOTION SENSOR
A = Existing controller or channel (to keep)
B= Motion Sensor to add or remove
Press P2 on
controller A.
Press P2 on
controller A.
Press P2 on
Motion Sensor
B to add or
remove.
ResponseResponse Response
NOTE:
• The ARC Motion Sensor can only be connected and paired to External Motors (15Nm and above).
• After the sensor is paired to a motor, it can independently drive the motor without the remote.
3 FUNCTION

7 | Automate™Programming Instructions | Motion Sensor ROLLEASE ACMEDA
To turn on motion sensing function of the motion
sensor (ACTIVE MODE), set dial to 5, and hold P2
until the remote emits two beeps.
In this mode, sensitivity is adjusted by the dial.
When motion sensor is triggered, shade will
move to upper limit. After each trigger, the
motion sensor will not trigger again for another
30 seconds.
To turn off motion sensing function of the motion
sensor (INACTIVE MODE), set dial to 9, and hold
P2 until the remote emits two beeps.
In this mode, the motion sensor will not trigger
the shade to move. The sensor can still be used
as a remote to move the shade up or down.
3.4 ACTIVE MODE
3.5 INACTIVE MODE
Response
Response
Dial Setting
Dial Setting
Hold P2
Hold P2
0
1
2
3
8
7
4
9
6
5
0
1
2
3
8
7
4
9
6
5
0
1
2
3
8
7
4
9
6
5
0
1
2
3
8
7
4
9
6
5
0
1
2
3
8
7
4
9
6
5
0
1
2
3
8
7
4
9
6
5
To move shade to top limit, set dial to 5 and
press P2.
To move shade to bottom limit, set dial to 9 and
press P2.
3.3 USE SENSOR AS REMOTE
ResponseDial Setting Press P2
ResponseDial Setting Press P2
0
1
2
3
8
7
4
9
6
5
0
1
2
3
8
7
4
9
6
5
0
1
2
3
8
7
4
9
6
5
0
1
2
3
8
7
4
9
6
5
0
1
2
3
8
7
4
9
6
5
0
1
2
3
8
7
4
9
6
5

8 | Automate™Programming Instructions | Motion Sensor ROLLEASE ACMEDA
1 STATIC TITLE
ROLLEASE ACMEDA | AUSTRALIA
110 Northcorp Boulevard,
Broadmeadows VIC 3047
T [phone] | F [phone]
ROLLEASE ACMEDA | USA
750 East Main Street, 7th Floor,
Stamford, CT 06902 6320
T [phone] | F [phone]
ROLLEASE ACMEDA | EUROPE
Via Conca Del Naviglio 18, Milan
(Lombardia) Italy
T [phone] | F [phone]
[e-mail]
rolleaseacmeda.com
Problem Cause Remedy
Sensor does not work Battery is discharged Replace battery
Battery is inserted incorrectly Check battery polarity
Motor is not responding
Radio interference / Shielding
Ensures sensor is positioned away
from metal objects and that aerial
on motor is kept straight and away
from metal
Receiver distance is too far from
transmitter Move sensor to a closer position
Power failure Check power supply to motor is
connected and active
Incorrect wiring
Check wiring is connected
correctly (refer to motor
installation instructions)
Pairing error
Set dial to 5 or 9 and press multi
function button to verify motor
reacts
Awning constantly retracts during
operation Sensitivity set too high Reduce sensitivity
Awning does not react to wind
setting
Wind Sensitivity is too high Adjust sensitivity
Duration of wind intensity level is
less than 3 seconds
Wind gust durations must be over
3 seconds to trigger
Sensor causes awning to extend
instead of retract Direction is incorrect
Use remote to delete existing
upper/lower limits, hold UP and
DOWN button to reverse direction,
then set the upper/lower limits
again
Sensor beeps every five seconds Flat batteries Replace batteries with correct type
4 TROUBLE SHOOTING