CARLO GAVAZZI TRIPLESHIELD CA User manual

Specifications are subject to change without notice (02.12.2016) 1
Housing diameter Ordering no. Ordering no.
Cable Plug
M18 CA18CLL12BP CA18CLL12BPM1
M 30 CA30CLL30BP CA30CLL30BPM1
Ordering KeyProduct Description
Capacitive Level Detector for Plastic & Rubber
Thermoplastic Polyester Housing
Types CA, M18, M30, DC, Teach-in
• Primary designed for plastic and rubber
applicatioins
• For liquid and dry bulk material detection
• Featuring TRIPLESHIELD™ Sensor Protection
• Teach-in of sensing distance via push-button or
COM-input
• Automatic detection of NPN or PNP load
• Selectable make or break switching by means of
Teach-in function
• Protection: Short-circuit, transients and reverse polarity
• Humidity compensation
• Alarm output for unsafe operation or heavy dirt build-
up on sensing surface
• 5 years of warranty
Capacitive proximity switch
Housing diameter (mm)
Housing material
Housing length
Detection principle
Rated operating dist. (mm)
Output type
Output configuration
Connection type
Type Selection
Capacitive level detector
with specialized and opti-
mized features for level
detection in plastic and rub-
ber applications.
The adjustment is easy to
change by means of the
single-step teach-in func-
tion. The sensing face (flush
mounted) can withstand
temperatures up to 120 °C.
3-wire DC output with
selectable make (NO) or
break (NC) switching and
NPN Alarm. Grey polyester
housing with 2 m PVC cable
or M12 plug.
CA18CLL12BPM1
Sensitivity Adjustable (Teach-in)
Repeat accuracy (R) ≤ 5%
Hysteresis (H) 5 - 10%
Rated operational volt. (UB) 10 to 40 VDC (ripple incl.)
Ripple ≤ 10%
Rated operational current (Ie) ≤ 250 mA (continuous)
No-load supply current (Io) ≤ 12 mA
Voltage drop (Ud) ≤ 2.5 VDC @ max. load
Protection Short-circuit, reverse
polarity, transients
TRIPLESHIELDTM
protection-EMC
IEC 1000-4-2/EN 61000-4-2 30 kV
IEC 1000-4-3/EN 61000-4-3 > 15 V/m
IEC 1000-4-4/EN 61000-4-4 3 kV
IEC 1000-4-6/EN 61000-4-6 >10 Vrms
Frequency of operating
cycles (f) 5 Hz
Indication
For output ON LED, yellow
For safe/unsafe LED, green
Environment
Degree of protection IP 68
Operating temperature -20° to +85°C ( -4° to +185°F)
Max. temperature on sensing face 120°C (248°F)
Storage temperature -40° to +85°C (-40° to +185°F)
Housing material
Body Grey, thermoplastic polyester
Cable end Polyester, softened
Nuts Black, PA12 Grilamid
Connection
Cable Grey, 2 m, 4 x 0.25 mm2
Oil proof, PVC
Plug (M1) M12 x 1
Cable for plug (M1) CON.1A-series
Weight
Cable version - M18 / M30 110 g/160 g
Plug version - M18 / M 30 30 g/70 g
Approvals UL, CSA
CE-marking Yes
Specifications
TRIPLESHIELD™

2 Specifications are subject to change without notice (02.12.2016)
CA, M18, M30, DC, Teach-in
Installation Hints
Dimensions
Relief of cable strain Protection of the sensing face Switch mounted on mobile carrierTo avoid interference from inductive voltage/
current peaks, separate the prox. switch
power cables from any other power cables,
e.g. motor, contactor or solenoid cables Not correct
Correct
The cable should not be pulled A proximity switch should not serve as
mechanical stop
Any repetitive flexing of the
cable should be avoided
Plug
Cable
Plug
Cable
BK 4
ILOAD < 250mA
BN 1
Self-Teach
Teach-in
BU 3
WH 2
Wiring Diagram
ILOAD < 250mA IALARM < 20mA
Teach-in
Self-teach
Delivery Contents
•Capacitive switch: CA..CLL..BP..
• Packaging: Cardboard box
• Installation & Adjustment Guide (MAN CAP ENG/GER)
Accessories
• Plugs CON.1A.. series.
For further information, please refer to “Accessories.
The PNP- or NPN-load will be automatically
detected.
By means of the teach-in wire, the functions
described in the Teach-in Guide can be set
up.
It is possible to “teach-in” several sensors at
the same time by connecting the WH-wires
in parallel to the common ”-” supply.
(#): Plug connections
CA18 CA30
89.2
50 23
M18 x 1 LED M12
89.55
50 23
M18 x 1 LED
99.2
50 23
M30 x 1.5 LED
90.45
50 23
M30 x 1.5 LED M12 x 1
(1)
(3)
(2)
(4)

Specifications are subject to change without notice (02.12.2016) 3
Teach-in Guide
Adjustment - wall
No target present - tank empty
Push-button
LED - Green
LED - Yellow
Time (sec)
Press push-button >3 seconds until LEDs are flashing once per second. The surroundings will be calibrated when the
push-button is released during the following 3 seconds
Adjustment - object
Target present - tank full
Push-button
LED - Green
LED - Yellow
Time (sec)
The self-calculated switch-point can be changed by means of the Teach-in function for ”Target present”.
Press push-button >6 seconds until LEDs are flashing twice per second. The object will be calibrated when the push-button
is released during the following 3 seconds
Adjustment - NO - NC
Push-button
LED - Green
LED - Yellow
Time (sec)
0 1 2 3 4 5 6 7 8 9 10 11 12 13
Press push-button >9 sec. until LEDs are flashing three times per second. The status of NO-NC will toggle when the
push-button is released during the following 3 seconds
0 1 2 3 4 5 6 7 8 9 10 11 12 13
0 1 2 3 4 5 6 7 8 9 10 11 12 13
Releasing the push-button after 12 sec. will reset the sensor to factory settings.
CA, M18, M30, DC, Teach-in
The sensor will calculate a switch-point by itself. No further calibration is needed.