Romoss eUSB sofun 6 PH60 User manual

Portable laptop external battery
1. Check if the charging voltage of the digital product is compatible
with the DC5V output voltage of eUSB sofun 6.
eUSB sofun 6
①
Model
Outer
Diameter
Inner
Diameter
15-16V
18-20V
LED4 LED1
Please read the manual carefully before using the product.
Follow the instructions and use it properly.
Instructions to users
I. Charging eUSB sofun 6 (Figure )
Unplug the power immediately when the product is fully
charged.
II. Charging laptops using eUSB sofun 6 (Figure )
Check the voltage required by the laptop.
Check the voltage in one of the ways listed below:
3.42A
3.42A
Check the label at the back of the laptop.
1.Charge laptop
Check the label on the original power adapter of the
laptop/ultrabook.
②
3. Choose a connector that fits the laptop port
Select eUSB according to laptop port specifications(e.g.
model, specifications, suitability). See the table below for details:
connector
Ple ase select proper charging cable and s con nector
other wise mismatch between laptop/ultrabook charging
vol tag e and e USB c h arg ing c abl e o utp ut vo lta g e,
laptop/u ltrabook port specifications and s connector
specification s will lead to improper functions. Appl e
product users can choose dedicated ROMOSS Macbook
charging cables, which supports plug-and-us e and
needs no s. Please contact local distributorconnector
for details.
4. Charge laptop with eUSB sofun 6
Connect one end of eUSB charging cable to corresponding
s and the other end to the laptop.connector
②Connect the other end of eUSB charging cable to eUSB port on
eUSB sofun 6. Switch it on and the charging process starts.
2. Use the digital product's original cable, and connect one end to
the digital product, the other end to eUSB sofun 6.
Connected and switch it on, the charging process starts with
the working signal lights up.
When using the product, the signal will flicker if the power is
less than 5% to prompt users that the battery itself needs to
be charged.
Indicator of battery left
LED Signal
1st signal lights up
1st, 2nd signals light up
1st, 2nd, 3rd signals light up
1st, 2nd, 3rd and 4th signals light up
Power Percentage
When switching off, LED signals will go out in 3~5 seconds
and the battery will enter battery saving mode in about 1
minute. If users want to use it to charge digital products,
press the switch once and wake it up. When switching off,
the 1st signal will flicker if the power is less than 5% to
prompt users that the product itself needs to be charged.
Do not use DC15~16V charging cable with DC18~20V
laptop.
Do not use DC18~20V charging cable with DC15~16V
laptop.
Do not use DC12~14V charging cable to a laptop.
Cautions
eUSB s for different laptop modelsconnector
Connectort Suitable For
工艺
1:1
图纸比例
eUSB sofun 6 PH60 九国语言
市场部确认 销售部确认 产品部确认
70*110mm
成品尺寸
印刷清晰，折线整齐
版本号 日期
工程师
内容
A0 14/07/17原始发行
张艳
张艳
70X110mm 正反面 60g书纸印
1.Please read the manual carefully before using the product.
Follow the instructions and use it properly.
2.Do not dismantle or disassemble the product yourself; the
product does not contain any parts that need users to assemble
or maintain themselves
3.Do not use non-original eUSB transmission cables or connectors
4.Do not place or use the product in very hot or humid environment;
do not place or use it in direct sunlight (ambient temperature
for use: charging 0℃~45℃; discharging -10℃~60℃; ambient
temperature for storage -20℃~60℃).
5.Do not throw this product into fire or water, so as to avoid possible
fire and explosion
6.Do not use paper or other objects to cover or shield the product,
which may affect heat dissipation and cooling.
7.Unplug the power cable when not using the product, so as to
avoid injury or property loss.
8.Do not shake it, tap it or hit it.
9.Please keep the product out of the reach of children.
10.Do not use it if any liquid leaks out of the product or it puffs up
or if there is any other abnormal situation, contact the service
center immediately.
11.Do not use it if any liquid leaks out of the product. If the liquid
goes into your eyes, do not rub your eyes, but quickly flush your
eyes with fresh water. If necessary, go to see a doctor.
黑白印刷
2.Ch oose a proper eUSB charging cabl e
Portable laptop external battery user manual
①
III. Charging digital products using
eUSB sofun 6 (Figure )
ⅠEN
01
ⅠEN
03
ⅠEN
02 ⅠEN 04
User Manual
I
Support most laptops, Ultrabooks, tablets, smartphones, MP3, MP4
and other digital products.
Support most laptops, Ultrabooks, tablets, smartphones, MP3, MP4
and other digital products.
eUSB cables are categorized into three types by output voltage,
one is DC15~16V, the other is DC18~20V or DC12~14V. This
device comes standard with a DC18~20V cable.
Purchase a DC15~16V or a DC12~14Vcable if necessary. Before
charging, please verify that the output voltage of an eUSB cable
matches the input voltage of your laptop.
the same time.
When charging eUSB sofun 6, it can charge other digital devices at
Remark: only the power is above 25%, this function will be effective.
Charging and discharging Sync Function:
Acer,Gateway,Toshiba,IBM,Hitachi,
NEC,Sharp,Twinhead,Compaq
6.3mm 3mm 6330R Toshiba
Acer,Asus,Clevo,HP,IBM,
Lenovo,C ompaq,Gatewa y,Fujistu,
Toshiba ,Advent,MS I,Hitachi, NEC,
Panasonic,Samsung,Sharp
5.5mm 2.5m m
4017R HP,Compaq
4817R
5517R Acer,Dell
5521R
5525R
Acer,Asus,Clevo,HP,Compaq
4.8mm 1 .7m m
4mm 1.7 mm
5.5mm 1 .7m m
5.5mm 2.1m m
3011A
3011S
4012A
4529D
Asus
Samsung
Asus
Dell4.5mm 2 .9m m
4mm 1.2 mm
3mm 1.1 mm
1.1mm
3mm
6.5mm 4.4m m
7.9mm 5.5mm
6544R
7450D Dell
7450H HP,Compaq
7955R IBM,Lenovo
Sony,Fujistu,Samsung
7.4mm 5mm
7.4mm 5mm
Made in china
H I
+
+
BA D E
laptop
C
eUSB sofun 6
G
USB output port
eUSB output port
LED power indicator
eUSB connector
Button Input port
AC adapter
Charging tip
eUSB cable
-20~60℃
Specifications
eUSB sofun 6
Name
Capacity
Model
Weight
Size
Input
Output
Power
Temperature :
Environment for Storage
Charging Time
Ambient Temperature
for Use
The electrical core will have 85% capacity left after 300 cycles.
(From fully charged to fully discharged is a cycle)
eUSB: DC12-20V 3.5 A MAX DC5V 1A MAX
DC5V 2.4A
MAX
~402g /14.18ozs
DC 15~20V 3.5A MAX
15600mAh
65W MAX
USB:
~L160x W80xH22.6mm
~L6.3x W3.15x H0.89inches
12
~4Hrs
Please use the original adapter to insert the DC input of eUSB
sofun 6. You will find eUSB sofun 6 is fully charged when four
LED indicator lights are on at the same time.
Remarks:
please make sure the output of voltage and
current on the powerbank is compatible with the input demand
of your laptop before you use Romoss power bank to charge it.