Rona STANDARD User manual

https://vimeo.com/69242485
Operating instructions
for RoNa Hand Chainsaw
STANDARD/STANDARD-C · STANDARD-Plus/STANDARD-Plus-C · PROFI-C-lang
I) Application fields:
This light and easy-to-use hand chainsaw is especially suitable for sawing wood, branches, roots (also
under water), logs and plastic pipes, e.g. PVC pipes even in hard to reach areas.
Not suitable for sawing metal.
It is particularly useful for working on high trees (with Model “STANDARD-PLUS-C”). Branches at a height
of up to approx. 4 m can be quickly, simply and securely sawn off from the ground. You no longer need to
climb up trees, or try to work awkwardly from a ladder.
GB
… always saw parallel
to the object
… sawing with the
extension cords
… can also be used
under water
3 year
guarantee
Important information: When you unpack this tool, you will notice that the chain is somewhat stiff.
This is due to the production process. After the chain has been used a couple of times it will
become more supple and easier to handle. For this reason, we recommend using the saw on dry
wood (e.g. beams etc.) first before using on trees. To avoid injury, always wear protective gloves.

B) Working with the extension Model “STANDARD PLUS (C)” (2 x 4 m cords)
A) Working without the extension (Models “STANDARD (C)” and “PROFI-C-long”)
The connection hooks are simply hooked into the appropriate boreholes on the end chain links of the
chainsaw. Important: after assembly, slightly squeeze the hooks together with pliers to prevent them from
falling out!
II) Assembly:
a) Model “STANDARD (C)”:
■1 chainsaw:
90 chain links, 82 cm long
■2 handles
■Instructions
■pouch
a1) Model “PROFI-C-long“
(144
chain links ,
1,30m long)
b) Model “Kit retrofit set”
for Modell “STANDARD (C)”:
■1 x 4 m nylon cord
with throwing weight and
guide bracket
■1 x 4 m nylon cord
■Instructions
c) Model “STANDARD PLUS
(C) ”:
■1 chainsaw: 90 chain links, 82 cm long
■2 handles
■1 x 4 m nylon cord with throwing
weight and guide bracket
■1 x 4 m nylon cord
■Instructions
■pouch
r
e
eHook the cord without the throwing weight into the chainsaw.
rNow attach the cord with the guide bracket and the throwing weight to
the end of the chainsaw as follows:
■Take the hook from the guide bracket
■Then feed into the end of the chainsaw (2)
■Then hook the whole assembly back into the guide bracket again
tNow throw the throwing weight over the branch which you would
like to saw off.
uThen pull down the cord, to which the throwing weight is attached,
until the chainsaw takes hold. The guide bracket has been designed so
that the chainsaw always saws straight into the branch.
iNow attach the handles (if necessary tie a knot in the cords) and pull the saw
evenly backwards and forwards until it takes proper hold. Do not cut off any surplus rope.
You may need this for higher branches.
o
Important! Always stand to the side of the branch so that the branch or the chainsaw cannot
fall on your head. We recommend that two people operate the chainsaw on higher branches.
+ =

III) Information about using the chainsaw:
The hand chainsaw is made of top quality, heat-treated steel.
This ensures safe handling and a long life.
■Loop the hand chainsaw over the respective piece of wood and start sawing slowly‚
until the chain links take hold.
■Now pull alternately and evenly in different directions – backwards and forwards
■Use the whole length of the chainsaw.
■The chainsaw can be used by two persons if material is thicker.
The saws are especially suitable for diameters of between at least 4 cm - max. 25 cm.
IV) Hazard information:
■Wear protective gloves when working
■It is forbidden to remove individual chain links from the chainsaw in order to shorten the
chain or to insert new chain links. If the saw is damaged, exchange the whole chainsaw.
■When working, always assume a safe stance, especially when working overhead.
■When working overhead, the branch that needs removing must always be secured against
falling down. We recommend wearing a helmet and that two people operate the chainsaw on
higher branches.
V) Maintenance/care:
■Check the chain regularly for damage.
■After use, never leave the hand chainsaw lying around outside when unprotected. Danger of injury.
■Always store the saws in the supplied case.
■If used often, clean and rub down lightly with oil (e.g. motor oil).
tui
o
www.ro-na.de