Rosco STSK7316 User manual

1
FORKLIFT CAMERA SYSTEM
INSTALLATION & OPERATING INSTRUCTIONS
KIT# STSK7316
ROSCO INC.
90-21 144TH PLACE,
JAMAICA, NEW YORK 11435
WWW.ROSCOVISION.COM
Version 1.0
©2013 Rosco® Vision Systems, All Rights Reserved
Specifications and details are subject to change without prior notice.

2
TABLEOFCONTENTS
FEATURES................................................................................................................ 3
KIT CONTENTS......................................................................................................... 3
INSTALLATION......................................................................................................... 4
MONITOR....................................................................................................................... 4
MONITOR INSTALLATION DIAGRAM .............................................................................. 5
WIRING DIAGRAM ......................................................................................................... 6
WIRING .......................................................................................................................... 7
CAMERA......................................................................................................................... 8
CAMERA INSTALLATION DIAGRAM ................................................................................ 9
MONITOR FUNCTIONS ................................................................................................. 10
MONITOR SET UP......................................................................................................... 12
TROUBLESHOOTING............................................................................................. 13
TECHNICAL SPECIFICATIONS.............................................................................. 14
STSM207 MONITOR SPECIFICATIONS .......................................................................... 14
STSC107 CAMERA SPECIFICATIONS.............................................................................. 15
SPARE PARTS LIST............................................................................................... 16
OPTIONAL PARTS LIST......................................................................................... 16
COMMERCIAL WARRANTY................................................................................... 17

3
FEATURES
MONITOR
•Heavy Duty Aluminum Housing
•7 Inch Wide WVGA Bright Display
•Waterproof (Indoor & Outdoor)
•Up to 4 Camera Inputs
•Split Screen Function
CAMERA
•Rugged Shock Resistant Metal Housing
•Stainless Steel Bracket
•Waterproof
•Heated
•Built-in IR For Night Vision
•Audio
KITCONTENTS
Before use this products, please check below contents.
MONITOR CAMERA CABLES 4 SETS OF U-BRACKET SUNSHADE (optional)
Trigger Wires
Your kit will contain the following hardware:
Monitor U-Bracket Backing Plate plus hardware Camera Mounting Plates plus hardware

4
INSTALLATION
MONITOR
Locate a suitable position for monitor, using caution to make sure that the operator’s forward field of
vision is not obstructed. Recommended mounting is overhead, utilizing the included U-Bracket with
backing plate and hardware, as shown in these examples:

5
MONITOR INSTALLATION DIAGRAM

6
WIRING DIAGRAM
After installing the Monitor, connect it to Video Input/Power Harness as shown. The connect Power
Cable to the battery or Voltage Converter (see next section). Secure the wires and activate the Monitor.
Connect the Camera 1 trigger wire as desired (for example, to reverse gear or backup lights/alarm
circuit). This will allow the operator to choose between having the Monitor on at all times or only active
during reverse travel.
Connect the Camera Extension Cable to the Camera 1 Input on the Video Input/Power Harness, and then
connect the Camera’s cable to the Camera Extension Cable. This will allow the installer to determine the
best possible Camera location.
STSC107 Camera
STSH308
16’ Camera
Extension
STSM207 Monitor
STSH347
Video Input/Power
STSH338
Power Cable
BLACK
(CAMERA 1)
Trigger Input
CAMERA 1
Camera
Input

7
WIRING
Connect STSK7316 Power Wire (RED) to 12-24VDC source as provided on the vehicle. Note that
FORKLIFT may be equipped with a Voltage Converter as shown here:
OR
+ 12VDC INPUT
POWER TO
CAMERA SYSTEM

8
CAMERA
With the Camera powered but not permanently installed, move it around to locate a suitable position,
either within the Forklift frame or in an area not susceptible to damage, which will provide a clear view
of the desired area. Recommended mounting is high on the frame. Using the universal camera mounting
brackets and hardware, install the camera and fasten securely as shown in these examples:
Secure all cables with tie-wraps or as otherwise necessary. The system is now ready to operate as a
single-camera operation. For multiple views, additional cameras may be installed and individually
connected to the appropriate inputs on the Video Input/Power Harness.

9
CAMERA INSTALLATION DIAGRAM

10
MONITOR FUNCTIONS
NAME
DESCRIPTION
A
LCD Screen
7” Wide VGA (800x480) LCD Display
B
Automatic Dimmer Sensor
Sensor to control LCD brightness (Day/Night)
C
Dimmer Button
Press to set up dimmer function: Day/Night/Auto
D
MODE Button
Press to select and change split screens: Full, 2, 3, 4
E
Move Button (down)
Press to move down menu options
F
Move Button (up)
Press to move up menu options
G
Select Button (left)
Press to select or adjust values of selected menu option
H
Select Button (right)
Press to select or adjust values of selected menu option
I
MENU Button
Press to open on-screen menu options
J
Power Button
Press to turn ON/OFF power
K
Stand-by LED
White LED on in stand-by mode
A
B
C
D
E
F
G
H
I
J
K
MONITOR FUNCTION BUTTONS