Rosewill RPLC-500 User manual

500Mbps Powerline Gigabit Ethernet Adapter
RPLC-500
User Manual

500Mbps Powerline Gigabit Ethernet Adapter KIT - RPLC-500KIT- User’s Manual
-2-
Contents
PACKAGE CONTENTS.........................................................................................................3
CHAPTER 1 INTRODUCTION TO HARDWARE..............................................................4
1.1 EXPANDING YOUR NETWORK WITH RPLC-500.................................................... 4
1.2 KEY FEATURES ................................................................................................. 4
1.3 APPLICATION .................................................................................................... 5
1.4 SYSTEM REQUIREMENT ..................................................................................... 6
1.5 HARDWARE DIAGRAM OF RPLC-500................................................................. 6
1.5.1 LED ..................................................................................................7
1.5.2 Powerline Adapter’s Button and Connector .................................7
CHAPTER 2 INTRODUCTION TO UTILITY .............................................................8
2.1 UTILITY INSTALLATION...............................................................................8
2.2 UTILITY INTRODUCTION ...........................................................................12
2.2.1 Main Tab........................................................................................12
2.2.2 Privacy Tab.................................................................................... 15
2.2.3 Diagnostics Tab............................................................................16
2.2.4 About Tab......................................................................................18
CHAPTER 3 FORMING A POWERLINE (HOMEPLUG AV) NETWORK................18
3.1 USING THE SECURITY PUSHBUTTON.........................................................19
3.2 USING THE UTILITY.................................................................................19
CHAPTER 4 JOINING A NETWORK...................................................................... 21
4.1 USING THE SECURITY PUSHBUTTON.........................................................21
4.2 USING THE UTILITY.................................................................................22
APPENDIX A: IMPROVING THE TRANSMISSION QUALITY ...............................23
APPENDIX B: SPECIFICATIONS .......................................................................... 23
APPENDIX C: ACRONYMS AND ABBREVIATIONS.............................................25
APPENDIX D: RPLC-500 QOS SUPPORT ............................................................25

500Mbps Powerline Gigabit Ethernet Adapter KIT - RPLC-500KIT- User’s Manual
-3-
Package Contents
The following items should be found in your package:
2x Rosewill RPLC-500 500Mbps Powerline Gigabit Ethernet Adapter
2x RJ45 Ethernet Cable
1x Quick Installation Guide
1x Resource CD for RPLC-500, including:
Rosewill Powerline Utility
Quick Installation Guide
User Guide
Note:
Make sure that the package contains the above items. If any of the listed items are damaged
or missing, please contact with your distributor.

500Mbps Powerline Gigabit Ethernet Adapter KIT - RPLC-500KIT- User’s Manual
-4-
Chapter1Introduction to Hardware
Thank you for purchasing Rosewill‟s RPLC-500 Homeplug AV compliant
Powerline Adapter. The RPLC-500 adapter can transmit data up to 500mbps via
household‟s power outlet. RPLC-500 can help you to establish a high-speed
network that supports video, voice and data without wiring and drilling. It is
suitable for using in a wide range of both residential (at home) and commercial
(offices, apartments, hotels, warehouses) network applications.
1.1 Expanding your Network with RPLC-500
The RPLC-500 plugs into an power outlet to extend cable or DSL modem
connection or your current Ethernet Network to almost any power outlet in your
home with any new cabling.* Devices can securely communicate with each other
via the 128-bit Advanced Encryption Standard (AES) through RPLC-500 at a
high speed transfer rate of 500Mbps and Gigabit LAN support.
Note:
Powerline Technology has certain limitations.
1. The best performance for Powerline Data transmission will be under one power circuit
2. Performance may be decreased under different circuits but within one Electricity Meter
due to the drop-off via hardware.
1.2 Key Features
Plug and Play with Quick and Easy Installation
Installation requires no new wiring
Every power socket becomes a connection node in the household.
RPLC-500 supports connection for a total of 8 nodes.
Plug-and-play to your routers, computers and other network devices.
Power up your Network with Ultra fast speed
Physical data rate is up to 500Mbps.
Ethernet Speed is up to 1000Mbps
Enjoy Stable HD Videos and Gaming

500Mbps Powerline Gigabit Ethernet Adapter KIT - RPLC-500KIT- User’s Manual
-5-
With a pair of plug-and-play RPLC-500 installed, you can easily extend
your home network through any electrical outlet for Internet access by
HDTVs, Blu-ray™ players, DVRs, PCs and game consoles.
QoS Management Enhances Streaming Quality
RPLC-500 supports 4-level type QoS and 8-level VLAN priority fields
which automatically improves the streaming quality
Green Feature for Power saving mode
RPLC-500 will detect signals when there is no signal transmit, it will
automatically enters Power Saving mode which saves near 80% of the
energy consumption.
1.3 Application
High Definition (HD) and Standard Definition (SD) video distribution
Higher data rate broadband sharing for Powerline LAN
Shared broadband internet access
TV over IP (IPTV) and Voice over Internet Protocol (VoIP)

500Mbps Powerline Gigabit Ethernet Adapter KIT - RPLC-500KIT- User’s Manual
-6-
1.4 System Requirement
If need to use Powerline Utility: Operating system: Windows 98SE, 2000, ME,
XP 32/64 bit and Vista 32/64bit, otherwise, no OS require
CPU: Intel Pentium III or better, clock rate faster than 2.0GHz recommended
RAM: At least 128MB
Screen resolution: Any resolution
Free disk space:At least 20MB
Network interface: At least one Fast Ethernet (100 Mbps) network card, and
a Ethernet Cord
1.5 Hardware Diagram of RPLC-500

500Mbps Powerline Gigabit Ethernet Adapter KIT - RPLC-500KIT- User’s Manual
-7-
1.5.1 LED
LED
Color
Behavior
Description
(Power)
Green
On
System runs normally.
Green
Blink
System is resetting.
System is in the process of
password synchronization.
System is in Power Saving mode
-
Off
The PLC adapter is powered off.
(Ethernet)
Green
On
Ethernet connection has established.
Blink
Data is being transmitted.
-
Off
No Ethernet connection.
(Data)
Green/Orange/Red
On
The PLC adapter has connected to the
powerline network. The Data LED color
may vary according to the Data
Transmit Quality.
Green: Data Transmit Quality Excellent
Orange: Data Transmit Quality Average
Red: Data Transmit Quality Poor
-
Off
The PLC adapter does not connect to
the powerline network.
1.5.2 Powerline Adapter’s Button and Connector
Reset: Pressing and holding the Button for between 10 seconds and 15 seconds
makes the adapter restore the factory default settings.
Security: Pressing and holding the button for less than 3 seconds makes the
adapter a member of the existing Powerline Network.
Ethernet Port (RJ45 Port): The Ethernet port connects to an Ethernet network
cable. The other end of the cable connects to your computer or other
Ethernet-enabled network device.
Connecting to the router/modem: Insert One end of the RJ45 Cable
(Recommend using Cat 5E cable or above) to this port, and the other end to the
router or modem. Then plug into the electrical outlet.

500Mbps Powerline Gigabit Ethernet Adapter KIT - RPLC-500KIT- User’s Manual
-8-
Connecting to PC / Smart TV / NB / Blu-ray Player / Media Player / IP
Phone: Insert One end of the RJ45 Cable (Recommend using Cat 5E cable or
above) to this port, and the other end to the other devices. Then plug into the
electrical outlet.
Chapter2Introduction to Utility
Note:
Before installing the PLC utility software, make sure that there is no any other powerline
utility installed on your computer. If there is another utility installed, please uninstall it and
restart your computer.
2.1 Utility Installation
Please follow the steps below to install the utility.
1. Please insert the utility CD into the computer‟s CD-ROM drive. Select the
Utility Installation from the Wizard Page.

500Mbps Powerline Gigabit Ethernet Adapter KIT - RPLC-500KIT- User’s Manual
-9-
2. The window for installing the utility software will display. Click Next to
continue.

500Mbps Powerline Gigabit Ethernet Adapter KIT - RPLC-500KIT- User’s Manual
-10-
3. Select I Agree, and then Next to continue.
4. You can choose your own destination folder to install or click Browse… to
select the installation folder, and then click Next to continue..

500Mbps Powerline Gigabit Ethernet Adapter KIT - RPLC-500KIT- User’s Manual
-11-
5. You can choose your own destination folder to install or click Browse… to
select the installation folder, and then click Next to continue.

500Mbps Powerline Gigabit Ethernet Adapter KIT - RPLC-500KIT- User’s Manual
-12-
2.2 Utility Introduction
Click the desktop icon below to enter the configuration page.
2.2.1 Main Tab
The Main screen provides a list of all powerline devices logically connected to
the computer when the utility is running.The top panel shows the local
HomePlugAV devices connected to the network interface card (NIC) of the
computer. Click Connect. The utility automatically scans the powerline
periodically for other HomePlugAV devices connected to it. If no local
HomePlugAV device is discovered, the status bar displays NO HOMEPLUG
ADAPTERS DETECTED.
The lower panel displays all the HomePlugAV remote devices, which are

500Mbps Powerline Gigabit Ethernet Adapter KIT - RPLC-500KIT- User’s Manual
-13-
discovered in the current logical network. The total number of remote devices
connected in the same network is displayed above the remote device panel.
Network type (Public or Private) depends on the network status of the local
device. Autoscan shows whether the autoscan function is on. The following
information is displayed for all the devices that appear in the lower panel.
Device Name
This column shows the default device name, which may be modified. To
change the name, click Rename, or click the name and edit it in the list.
MAC Address
This column shows the MAC addresses of the remote devices.
Password
By default, this column is blank. You can click Enter Password to change it.
The steps for setting the password of the device (required when creating a
private network) are as follows:
Click the device name to select the device in the lower panel.
Click Enter Password. A dialog box appears, showing the device name
and password.
Click OK to verify the password. The password field accepts the device

500Mbps Powerline Gigabit Ethernet Adapter KIT - RPLC-500KIT- User’s Manual
-14-
password in any case formats, with or without dash.
Aconfirmation box appears if the password is entered correctly. If a device is
not found, a message appears, providing suggestions to solve the common
problems. This process might take a few seconds to get completed.
Add
This button is used to add a remote device to the existing network by
entering the device password of the device. A dialog box will appears. You
can enter a device name and the password. (Also refers as DEK on the back
Label, this DEK is generates via MAC address)
If the device is found and the password is entered correctly, a confirmation
box appears. If a device is not found, a message appears, providing
suggestions to solve the common problems.
Note:
The device must be in the powerline (plugged in), so that you can confirm the password and
add the device to the network. If the device is not located, a warning message appears.
Scan
This button is used to perform an immediate search for HomePlugAV

500Mbps Powerline Gigabit Ethernet Adapter KIT - RPLC-500KIT- User’s Manual
-15-
devices connected to the powerline network. By default, the utility
automatically scans every a few seconds and updates the displayed
information.
2.2.2 Privacy Tab
In the Privacy screen, you can maintain security for the logical network and
select the device included in the network.
All HomePlugAV devices are loaded using a default logical network (network
name), which is normally “HomePlugAV”. In the Privacy screen, you can modify
a private network by changing the network names and the passwords of the
devices.
You can always reset to the HomePlugAV network (Public) by entering
“HomePlugAV” as the network name or by clicking on the Use Default button.
Note:
If the network name changes to anything other than HomePlugAV, the network type in the
main screen is displayed as Private.
Set Local Device Only

500Mbps Powerline Gigabit Ethernet Adapter KIT - RPLC-500KIT- User’s Manual
-16-
This button is used to change the network name and password of the local
device. If a new network password is entered, all the devices appeared in
the main panel prior to this are no longer present in the new network,
effectively making the local devices not to communicate to the devices which
are in the old logical network. Click Set Local Device Only, the devices
previously set up with the same logical network (same network name)
appears in the device list.
Set All Devices
This button is used to change the logical network of all devices that appear
in the main panel. If these devices whose passwords have been entered for
the same logical network, a dialog box appears, indicating the success of
this operation. For the devices whose passwords are not entered, this
operation will fail and it will report a failure message.
2.2.3 Diagnostics Tab
The Diagnostics screen shows the system information and history of all remote
devices appeared over a period of time.
The Upper panel shows technical data concerning software and hardware on
the host computer that are used to communicate through HomePlug on the
powerline network. It includes the following:
Operating system platform/version
Host network name
User name
MAC address of all NICs (Network interface card) connected to the host
Identify versions of all driver DLLs and libraries used (NDIS) and
optionally
HomePlug chipset manufacturer name (Turbo Only devices)
MAC firmware version (Turbo Only devices)
MAC addresses of all devices connected locally to the host
Version of the configuration utility
Vendor name

500Mbps Powerline Gigabit Ethernet Adapter KIT - RPLC-500KIT- User’s Manual
-17-
The Lower panel displays the history of all remote devices appeared on the
computer over a certain period of time. All the devices and the parameters of the
devices on the powerline network are listed. Devices that are active on the
current logical network show a transfer rate in the rate column. Devices on other
networks, or devices that no longer exist are shown with a “?” in the rate column.
The following remote device information is available from the diagnostics screen:
Device alias name
MAC address
Password
Device last known rate
Device last known network name
HomePlug chipset manufacturer name
Date device last seen on the network
MAC firmware version
The diagnostics information displayed can be saved to a text file for later use, or
be printed for reference for a technical support call. Click Delete to delete the
devices which are no longer part of the network. A dialog window pops up with a

500Mbps Powerline Gigabit Ethernet Adapter KIT - RPLC-500KIT- User’s Manual
-18-
confirmation message if the user wants to delete a device whose password has
been entered.
2.2.4 About Tab
The About screen shows the software version and provides a html link to a
website, such as http://www.qua.qualcomm.com. Clicking the web address, you
can visit the web site.
Chapter3Forming a Powerline (HomePlug
AV) Network
This chapter describes how to form a HomePlug AV logical network (AVLN) using
the Security pushbutton and using the Utility. Operation progress and outcome
can be monitored by observing the behavior of the power LED.

500Mbps Powerline Gigabit Ethernet Adapter KIT - RPLC-500KIT- User’s Manual
-19-
3.1 Using the Security Pushbutton
Scenario:
Devices A and B with different NMK (Network Membership Key used to
authenticate/access) values are connected to the same powerline. Users
want to use them to form a logical network.
Forming a HomePlug AV logical network
Please follow below steps to form a logical network using the Security
button:
1. Press the Security button on Device A for less than 3 seconds.
2. Press the Security button on Device B for less than 3 seconds. The
button on B must be pressed within 2 minutes
3. Wait for connection to complete.
The Power indicator on both devices will flash evenly at 1 second interval
until the operation succeeds or fails. The Power indicator will illuminate
steadily on successful completion. If an error occurs, the Power indicator on
both devices will flash unevenly for 2 minutes.
3.2 Using the Utility
Scenario:
Devices Aand B are located in different networks. Users want to use them to
form a logical network.
In this case, using the Security pushbutton cannot pair Devices A and B.
Users can only use the Utility to form a logical network.

500Mbps Powerline Gigabit Ethernet Adapter KIT - RPLC-500KIT- User’s Manual
-20-
Please follow below to form a logical network using the Utility:
1. Connect Device A to the network card of a PC.
2. Open the Utility. The Main tab page displays information about Device A
after connection succeeds.
Search for Local device on your computer
3. Click the Privacy tab page. Enter a name in the Private Network Name
field.
Setting the network name for your PLC
4. Click Set Local Device Only. When the following page is displayed, the
setting succeeds. Now Device A has been removed from its logical
network.
Network name setting success
5. Repeat the procedures above to configure Device B. Configure Device