Rosewill RSR-2P6U001 User manual

Wall-Mounted 2-Post Open Frame Rack Series
RSR-2P6U001 / / RSR-2P9U001 RSR-2P12U002

1.1 Rack Components
1.2 Rack Assembly Hardwares
1.3 Equipment Mounting Hardwares
①
②
③
④
⑤
⑥
⑦
⑧
Qty.(pcs)
Vertical Mounting Dual Rails
Right or Left-Side Support Strap
M6x12mm Phillips Head Screws
M6 nut
M6x12mm Phillips Head Screws & Nuts
#12-24 Screws
M6 Exposure Bolt
Top or Bottom Panel Frame
S/N
6U
2
2
0
20
20
12
12
4
9U
2
2
2
20
20
12
12
4
12U
2
2
2
20
20
12
12
4
Name
Wall-Mounted 2-Post Open Frame Rack Series
RSR-2P6U001
RSR-2P9U001
RSR-2P12U002
①
②③
④
⑤
⑤

Insert one end of the vertical mounting rails into the corners of the bottom panel
frame(both pane frames can be used as a top or bottom) opposite the mounting
side and secure them with 2 of the M6x12mm Phillips head screws and M6 nut
on each side.
WARNING:Do not attempt to mount the rack to the wall with equipment mounted to the rack.
Step 1
NOTE:The user can choose M6 Square Hole or #12-24 Threaded Hole as the equipment
mounting hole option,ensure left and right rails have same hole facing the front.
Insert the other end of the vertical mounting rails into the corners of the top
panel frame opposite the mounting side and secure them with 2 of the M6x12mm
Phillips head screws and M6 nut on each side.
Step 2
Wall-Mounted 2-Post Open Frame Rack Series
RSR-2P6U001
RSR-2P9U001
RSR-2P12U002

Attached the right-side and left-side support straps by securing 4 of the M6x12mm
Phillips head screws to the top panel frame and vertical mounting rails.and M6 nut
Step 3
Congratulations! You have finished the installation of the wall mounted 2-Post open frame rack.
Wall-Mounted 2-Post Open Frame Rack Series
RSR-2P6U001
RSR-2P9U001
RSR-2P12U002

RSR-2P6U001 / RSR-2P9U001 / RSR-2P12U002