Rowenta SOFT EXTREME EP7530E0 User manual

www.rowenta.co
EN
RU
UK
PL
CS
RO
BG
HR
HU
SR
BS
SL
SK
ET
LT
LV
1800127354
1800127354_01_SOFT_EXTREME_D0_105x148,5 07/01/13 16:27 Page1

10
11
14
20
21
a
b
17
18
16
19
17
15
5
6
7
12
9
2
322
8
4
1
1800127354_01_SOFT_EXTREME_D0_105x148,5 07/01/13 16:27 Page2

fig. 15 fig. 16
fig. 4 fig. 5
CLIC!
fig. 8
fig. 7 fig. 6
fig. 3
fig. 9
fig. 10
fig. 11 fig. 12
fig. 13
fig. 14
fig. 2
fig. 1
1800127354_01_SOFT_EXTREME_D0_105x148,5 07/01/13 16:27 Page3

fig. 34 fig. 35
CLIC !
fig. 36
fig. 22
fig. 23 fig. 24
fig. 25 fig. 26
fig. 27 fig. 28
fig. 29 fig. 31 fig. 32
b
fig. 33
fig. 30
fig. 19 fig. 20
fig. 21
fig. 17
fig. 18
1800127354_01_SOFT_EXTREME_D0_105x148,5 07/01/13 16:27 Page4

fig. 38
CLIC !
fig. 39 fig. 40
fig. 37
fig. 41
fig. 42
2
1
fig. 43
1
2
fig. 44
fig. 45
fig. 46
1800127354_01_SOFT_EXTREME_D0_105x148,5 07/01/13 16:27 Page5

6
Please read these instructions carefully before using the appliance.
1 - Description of the appliance
• Active numbing system function: numbs the nerve endings for the time it takes to remove
the hair.
• Pain-relieving function: Soft Extreme is equipped with a high-speed turbine which blows
air onto the skin and cools it. This helps to reduce the pain caused by epilation.
• Advanced micro-contact head function: Your appliance is equipped with a patented swive-
ling head that ensures optimal contact with your skin (fig. 2).
This head is perfectly adapted to all of the shaving areas, even the hardest-to-reach places
(knees, underarms, bikini line) to remove as much hair as possible in one movement, even
down to the shortest hair (from 0.5mm).
• Vision: For smooth, first time epilation your appliance is supplied with the Vision system. By
projecting an ultra-bright beam on your skin it makes all kinds of hair more visible, including
very fine, short or fair hair.
2 - Safety
• For your safety, this appliance complies with all applicable standards and regulations (Low
Voltage, Electromagnetic Compatibility, Environmental directives, etc.)
• Check that the voltage of your appliance corresponds to your domestic power supply.
Connecting the power supply incorrectly may cause irreversible damage not covered by the
guarantee.
• The installation and use of the appliance must always comply with the regulations in force
in your country.
• Do not immerse or put under running water, even for cleaning purposes.
• Do not hold with damp hands.
• The epilator must only be used with the power pack supplied (SSA-10W EU 139080 Input:
220-240V - 50-60Hz - 0,5A - Output: 13,9V - 800mA)
• This appliance is not intended to be used by persons (including children) with reduced phy-
sical, sensory or mental capacities, or lack of experience and knowledge, unless they are
supervised or have been given instructions beforehand concerning use of the appliance by
a person responsible for their safety.
Children should be supervised to ensure they do not play with the appliance.
1-Rotating head
2-Epilator head
3-Tweezers
4-Epilator head massage balls
5-Massage head (supplied with certain
models)
6-Exfoliation head (with certain models)
7-
Exfo iator head (with certain models)
8-Movable head release button
9-On/off switch
10-Cleaning brush
11-Power adaptor
12-“sensitive areas” accessory
(with certain models)
13-Shaver head (with certain models)
14-Micro-mesh
15-Trimmer
16-Release buttons
17-Blade assembly
18-Protective cap
19-Lubricant for bikini trimmer
20-Bikini trimmer head (with certain
models)
a. Cutting head with ceramic blade
b. 3 removable heads (3 / 6 / 9 mm)
21-
Pain-re ieving function
1800127354_01_SOFT_EXTREME_D0_105x148,5 07/01/13 16:27 Page6

7
EN
RU
UK
PL
CS
RO
BG
HR
HU
SR
BS
SL
SK
ET
LT
LV
• Do not use your appliance and contact an authorised service centre if: the appliance has
been dropped or if it is not working normally.
• Disconnect the appliance: before cleaning it or carrying out any maintenance work, or in
the event of any malfunction.
• Do not use it if the power lead is damaged.
• To unplug the appliance grip the plug; do not pull on the lead.
• Do not use extension cables.
• Do not use abrasive or corrosive products to clean the appliance.
• Do not use the appliance at temperatures below 0ºC or above 35ºC.
• When the appliance is running it should not make contact with your eyelashes, hair, clothes
or any other object which could cause injury or block the appliance.
• Do not use the epilator:
- on your face
- on damaged skin areas
- on areas which may present a health hazard (varicose veins, beauty spots, birthmarks)
- if you suffer from skin conditions such as eczema, inflamed skin or acne.
In the bikini area the appliance is only to be used on the external contour and never on more
intimate areas (vaginal lips). For reasons of hygiene we recommend you not to lend anyone
your appliance, even those who are closest to you.
GUARA TEE
This appliance is designed for domestic use only. It is not intended for professional use.
The guarantee will be null and void if the appliance is not used correctly.
3 - Preparation of the skin
Your skin must be clean and dry.
• Do not apply either cream or hydrating milk before depilation.
• If you previously used a razor for depilation:
- the first few times you use the depilator, your skin may feel more sensitive, as shaving has
made your hair thicker and stronger. This sensation will lessen the more you use your depila-
tor : the hair will grow back less quickly and become thinner.
• Your depilator will be much more effective and easier to use if you use it regularly.
We advise you to use your depilator as soon as your hair starts to grow back.
4 - Switch on (fig.43)
5 - Switch off (fig.44)
6 - PeelinG (according to model)
Peeling will enable you to limits growth of subcutaneous hair if practised regularly.
We strongly recommend that you use the Exfoliator Head 2 days before using your
epilator to avoid irritating your skin.
• And not to use a peeling gel or cream at the same time.
• Never carry out peeling on sensitive areas (armpits / bikini line / face)
• After peeling, we advise you to wipe over the area with a moist flannel
to remove any dead skin. Dry the skin thoroughly afterwards.
• Method :
- Press the release button to remove the epilator head. (fig.9)
1800127354_01_SOFT_EXTREME_D0_105x148,5 07/01/13 16:27 Page7

- Clip the Exfoliator Head to the epilator. (fig.34)
- Select speed 1. (fig.4)
- Start exfoliating with a slow, gentle up and down movement. (fig.35)
When using the Micro-Peeling function for the first time or if your skin is very delicate,
we recommend:
1. skin is wet before peeling, use cotton wool or a flannel to do this
2. making slow and gentle rotating movements when using the appliance
3. not to use the appliance more than twice on the same area.
• Replacing the exfoliating band
- Press the release button to remove the Exfoliator Head from the epilator. (fig.30)
1. Place your 2 thumbs between the white parts of the roll you wish to change (fig.31)
2. Spread the roll open until it splits
3. Turn the axis of the roll in order to remove it (fig.32)
4. Insert the new band by slotting the fins (b) of the exfoliator unit in the groove of the band
and pushing until it clicks! (fig.33)
7 - Using the exfoliating disk (depending on model)
When performed regularly, exfoliation limits the re-growth of subcutaneous hairs.
We strongly recommend that you use the exfoliating disk 2 days before depilation in order to
avoid damaging your skin.
Do not use an exfoliating cream or gel at the same time. Never use the exfoliating disk on
sensitive areas (underarms/bikini line/face) (fig. 40,41,42). After exfoliating, wipe the treated
area with a damp cloth to remove dead skin. Dry your skin thoroughly after use.
Instructions for use:
the exfoliating disk is easily attached to the same support as the massage head. Remove the
massage head by detaching the upper cover.
Place the exfoliating disk in the same place and press.
You will hear a click. The two parts are now assembled.
• Cleaning the Exfoliator Head. (fig.46)
8 - Removing hair from legs
Your appliance is equipped with a patented swiveling head that ensures optimal contact with
your skin (fig. 2).
This head is perfectly adapted to all of the shaving areas, even the hardest-to-reach places
(knees, underarms, bikini line) to remove as much hair as possible in one movement, even
down to the shortest hair (from 0.5mm). For a maximum pain-free effect, the vibrating sys-
tem should be continuously in contact with the skin.
- Select speed (fig. 4).
- Move the epilator gently against the direction of hair growth without pressing down (fig. 5).
9 - Using the epilator in sensitive areas
We recommend you to use the “sensitive areas” (12) attachment when you remove hair from
the under-arm and bikini contour areas.
This accessory has been designed to reduce the number of tweezers gripping your hair, so
8
1800127354_01_SOFT_EXTREME_D0_105x148,5 07/01/13 16:27 Page8

9
EN
RU
UK
PL
CS
RO
BG
HR
HU
SR
BS
SL
SK
ET
LT
LV
that hair removal is smooth and painless.
- For the best results we recommend you to position your epilator on your skin, tilting it in the
direction of movement, as shown in the diagram.
• Preparation of the area for epilation:
- Cut any hairs which are too long (over 1 cm).
1) Removing under-arm hair:
- Fit the “sensitive areas” accessory (12) over the epilator head, making sure that it clicks into place
(fig. 8).
- Select the speed (1)
Begin by running the epilator upward over your skin and then downward (fig. 6, 7).
Important:
a) hold your arm up and stretched out throughout epilation.
b) Stretch your skin gently to facilitate hair removal.
2) Removing bikini line contour hair:
- Fit the “sensitive areas” accessory (12) over the epilator head, making sure that it clicks into
place (fig. 8).
- Select the speed (1)
Important:
• keep your skin taut (fig. 10).
• Move the epilator slowly against the direction of hair growth without pressing down..
With the shaver head (supplied with certain models)
• Instructions for use
- Press the release button to remove the epilator head (fig. 9).
- Fit the shaver head (13) on the appliance (fig. 11).
- Select the speed (2)
- Turn off the appliance after use.
- Press the release button to remove the shaver head (fig. 12).
10 - Cutting and trimming hair in the bikini-line area
(with certain models)
Fit the bikini-line head (20). Your bikini-line head is supplied with three combs which lift long
hair so that it can be cut by the blade. Select the comb before you begin to use the appliance.
IMPORTA T: the first time you use this accessory we recommend you to use the comb
which leaves the greatest length of hair.
- If the desired length of hair is approximately 9 mm, use the largest comb.
- If the desired length of hair is approximately 3 mm, use the smallest comb.
- If the desired length of hair is approximately 6 mm, use the medium comb.
Slide the comb into the slot (fig. 13) and then select the speed (2). eep the appliance perpen-
dicular so that you can see the brand and move it gently against the direction of hair growth.
• To mark a clear bikini contour:
If you want to cut hair as close as possible to your skin, use the bikini area head without a
comb. The appliance must be off (press 0) and unplugged.
1800127354_01_SOFT_EXTREME_D0_105x148,5 07/01/13 16:27 Page9

Remove the comb attachment (fig. 14). Switch the appliance on, selecting the speed (2). Hold
the appliance perpendicular and move it slowly against the direction of hair growth.
IMPORTA T: stretch your skin with your other hand to raise the hairs. This will give you a
close shave with minimum skin irritation.
11 - Using the massage head (supplied with certain models)
This accessory (5) can be used to provide circular massage on the inner and outer sides of
your thighs (fig. 15). The massage head consists of 25 balls which rotate when they are in
contact with your skin to stimulate the exchange of body tissue nutrients and the elimination
of toxins.
The recommended duration of massage is 5 minutes for each area.
After an epilation session small red spots may appear on the areas treated. This reaction is
completely normal and is caused by pulling on the skin. It can be considerably alleviated by
using the massage head. We strongly recommend the use of the massage head after epila-
tion.
12 - Maintenance
• Cleaning the epilation head:
- Turn off the appliance and unplug it.
- Press the head release button and remove the epilation head (fig. 9).
- Place the epilation head under a cold running tap and turn it for 5 to 10 seconds (fig. 16).
- Shake the head vigorously to remove water and then dry it with a towel before replacing it
(fig. 17). You can also clean the head using the brush supplied (fig. 18).
• Cleaning the shaver head (supplied with certain models):
- Turn off the appliance and unplug it.
- Remove the protective cap (18) by holding the epilator firmly, pressing the release buttons
(16) on the shaver head and then pulling it upward. This will remove the protective cap (18)
on the blade assembly (17).
- Remove any hair by blowing the top and the underside of the mesh (14).
ever use the brush to clean the mesh (14).
So that your appliance continues to give good results, it is essential to oil the mesh regularly
with the lubricant provided. Sewing machine oil can also be used. (fig.20)
It is normal for a little oil to appear on the shaft of your shaver/bikini-line head (fig. 21,24):
we recommend you not to wipe it off, to ensure that these accessories continue to work well.
- The protective cap (18) and blade assembly (17) can also be cleaned under gently running
water to remove any hair. Shake these components vigorously to remove water and then dry
them with a towel before re-assembling them. Be careful not to press on the mesh.
- Replace the protective cap (18) on the blade assembly (17). You will hear a click when it is
pushed home (fig. 22).
10
1800127354_01_SOFT_EXTREME_D0_105x148,5 07/01/13 16:27 Page10