ROYAL GOURMET SG4002 User manual

[email protected]
Model: SG4002
Stainless Steel 4-Burner Gas Grill With Side Burner
www.royalgourmetusa.com

12
17
18
20
21

PROPOSITION 65 WARNING
1. Combustion by products produced when using this product contain chemicals known
to the State of California to cause cancer, birth defects, and other reproductive harm.
2. This product contains chemicals,including lead and lead compounds,known to the
State of California to cause cancer, birth defects or other reproductive harm.
Wash your hands after handling this product.
! !

4
3
7
89
10
6
5
11
12
16
13
15
18
2
22
20
19
17
21
14
23 24
4
1
3

Cylinder holder A
1pc
Cylinder holder B
1pc
8pcs
Side shelf 2pcs Cart joint 2pcs Rear shelf
Cart beam Left cart jointRight cart joint Left door Right door
Right door joint
1pc
Left door joint 1pc 1pc
4pcs
3pcs
4pcs
Caster 4pcs Bottom shelf 1pc 1pc
1pc 1pc1pc 1pc 1pc
Door handle 2pcs Handle base 4pcs Main body
Side table
decoration
1pc Side table 1pc Side burner shelf
1pc
Grease cup 1pc Flame tamer(small)
Cooking grate(big) Warming rack 1pc
Bolt A
Pin F Bolt G
Bolt C Base D Magnet EM4x10 8pcs 1pc
M6x15
M5x10 55pcs Bolt B M5x20 8pcs
1pc 2pcs
Bolt H M4x8 8pcs
Bolt I M5x6

A
1
23
A
A
A
4
G
G
23 24
A
5
Assemble the caster (1) to the bottom shelf (2)
with 16 bolts (A) as shown.
Assemble the side shelves (3) to the bottom shelf
with 6 bolts (A).
Assemble the cart joint (4) to the bottom shelf and
side shelf with 8 bolts (A).
Assemble the rear shelf (5) to the bottom shelf
with 5 bolts (A).
Assemble the cylinder holder A and B ( 23 ，24)
with 4 bolts (G).

H
E
C
6
A
8
7
C
A
9
D
10
11
G
12
Assemble the magnet (E) to the bottom shelf
with 2 bolts (H).
Assemble the cart back beam (6) to side shelves
with 6 bolts (A) and 2 bolts (C) as shown..
Assemble the right cart joint (7) to right shelves
with 3 bolts (A) and 1 bolts (C).
Assemble the door handles (11) handle bases (12)
to left and tight door with 4 bolts (G).
Screw 4 (D) underneath the doors (9.10).
Assemble the left cart joint (8) to left shelves
with 3 bolts (A) and 1 bolts (C).

C
14 13
15
A
B
I18
I
16
17
16
Insert the door spindle into the bottom shelf. Assemble the right left door joint (13,14) above
the door with 4 bolts (C) as shown.
Assemble the side table decoration (16) to the side
burner shelf (17) and side table(18) with 8 bolts (I).
Please note: release the hose of the side burner
and regulator under the control panel using scissors.
Then place the main body (15) to the cart,fasten
the right side of main body to cart brace with 4 bolts (A)
and 4 bolts (B).

B
A
1
2
F
Fasten the side table decoration to the side table
with 4 bolts (B) as shown.
Fasten the side table to the main body with 4 bolts
(A) as shown .
Connect the ventilator tube of the side burner to
the main body and fasten it with pin (F).
Insert the ignition line to the electrode hole as shown..

19
20
21
22
Attach the grease cup (19) to grease tray. Place the flame tamers (20) onto the main burners.
Place the cooking grates (21) onto the main body. Place the warming grates (21) onto the main body.

12

13

14

15

36"
36"
16

17

18

19