Royal Mounts ROY3512B User manual

-2-

-3-

INSTALLATION
Installing Wall Mount to In-Wall Box
-4-

Step3: Attaching
14”
M6x50mm
M6x50mm
14”
10 3/4”
M6X50mm
M6
Metal washer
M6 Washer
M6 Washer
M6X50mm
M6 Washer
Lag Bolt
Wall Mount
-5-

Attach Adapter Plate to Hook Bracket
2
-6-

Attaching Adapter Plate With Screen to Wall Arm Assembly
3
G
M8X8mm
(4PCS)
HM8(8PCS)
Metal washer
top screw
•Do not tighten screws with excessive force.
Overtightning can cause damage to mount. Tighten
screws to20in. •lb (2.26 N.M.) maximum torque.
CAUTION
•Do not lift more weight than you can handle. Use
additional man power or mechanical lifting equipment
to safely handle placement of the screen.
•Failureto lock adapter plate(BB) with screws (G) can
cause screen to come off mount if hit accidentally.
WARNING
-7-

Adjust tilt
4
-2-
-8-

Cord C over 5.1
Cable Management
5
Note: Make sure cords have enough slack to allow full move-
ments of the arm . Route cords inside arm slots of wall
assembly as show in 5.1. For demonstration purposes, the
wall has been omitted from the image.
-3-
-9-

MOUNTS
ROY3512B
!
.
-10-