RS Elite 303 Frame Flat Pack Instruction Manual

I
Contents (Standard Build only illustrated)
Tools Required
Glass door
Qty x 1
Vented Top Cover
Qty x 1
Steel Door
Qty x 1
M6 x 12mm Bolts
Qty x 38
Side Doors
Qty x 2
Universal Mounting Uprights (UMU’s)
Qty x 4
Trimmed (Top) End Frame
(Pre Assembled) Qty x 1
Plain (Base) End Frame
(Pre-Assembled) Qty x 1
Keys
Qty x 2
19” Mounting Posts
(Not required for shelving closets)
Qty x 2
Roof Clips
Qty x 4
M6 Nuts
Qty x 6
Assembly Stages 1- 3
Exploded View
Standard Frame
10mm 10mm
For Assembly
$
For Unpacking
Elite 303 Frame Flat Pack Assembly Guidelines
UMU Central Default Posit
ion can be adjusted Left
(as shown) or Right
a
c
d
b
I
I
J
1). 4 Bolts in each of the
four base saddle positions
(a-d) Torque to 15Nm
F
2). 4 Bolts in each of the
four top saddle positions
Torque to 15Nm
3). Mounting Angles can be forward
or rear facing and have two fixing
positions offering 60mm adjustment
each
2 or 3 M6 bolts in either
of the two positions
Torque to 15Nm
2 or 3 M6 nuts in either
of the two positions
Torque to 15Nm
I
I
D
D
CBA
E
H
F
G
JK
L
PLB000000035A0000 Iss F Page 1
G
F
M
N
Door Rods
Qty x 2 sets
M5 Nylock Nuts
(for door rods)
Qty x 4

Align and slide top hinge pin into corner mouldingFixed pin in bottom corner plate
Steel and glass doors hanging method
Optional 6 way fan tray shown
(Fully vented version supplied as standard)
Side Door hanging method Top cover fixing method
Ensure pin is locked in position Lay Top cover in position and push
clip into position front and rear only
BC
C
A
H
PLB000000035A0000 Iss F
Front, Rear and Side Door Hanging Guidlines
Elite 303 Frame Flat Pack Assembly Guidelines
Page 2
BE
C
D
D
P
P
O
L
P
Hinge Pins
pre-fitted to
front & rear doors
(Qty x 2 per front & rear door)
O
Door Plates
(Qty x 4 per end frame)
E
H
Down
to locate
Across
to lock