S.D.P. EZ Hauler Series Instruction Manual

PREOPERATIONAL INSPECTION
AND MAINTENANCE
EZ Hauler Series

FILTERS
EZ Hauler Series

Locate the engine oil dipstick & filter,
check oil level and note the filter change date.
NOTE: Engine oil filter must be changed after the first 50 hours and every 200 hours
thereafter
FILTERS

Locate the engine fuel filter and note
the change date.
NOTE: Engine fuel filter must be changed after every 200 hours of use
FILTERS

Locate the engine air filter and note
the change date
NOTE: Engine air filter must be changed after every 200 hours of use
FILTERS

Locate the hydraulic fluid filter behind the
rear dash panel, note the change date.
NOTE: The hydraulic fluid filter must be changed after the first 50 hours and every 200
hours thereafter
FILTERS

GREASE POINTS
EZ Hauler Series

Locate all grease points on the crane
and on the chassis.
NOTE: All grease points must be checked and greased weekly with
high pressure lithium grease
GREASE POINTS

FIBERGLASS BOOM &
ACCESSORIES
EZ Hauler Series

Check for stress cracks and chips on final
fiberglass extension.
NOTE: Keep surface of fiberglass boom clean to assure dielectric stability
FIBERGLASS

Check for stress and cracks in all
fiberglass accessories.
FIBERGLASS

ROPE & LIFTING STRAPS
EZ Hauler Series

Check for fraying, dirt and wear on the rope
NOTE: Never attach rope directly to object being lifted
NOTE: Contaminants on rope can compromise the dielectric stability
ROPE

Check wear on all lifting straps
NOTE: Always use a lifting strap when setting poles!
ROPE

CRANE & OUTRIGGER
ATTACHMENT BOLTS
EZ Hauler Series

Check all crane attachment bolts for
stress, wear, and torque.
NOTE: Torque specifications for the crane attachment bolts is 160 foot pounds
BOLTS

Check outrigger bolts for stress and wear.
Recommend 280lbs of torque
BOLTS

OUTRIGGERS
EZ Hauler Series

Check for wear and stress on all
outrigger pins and hubs.
OUTRIGGERS

Check for stress wear on outrigger
body, arms and feet.
OUTRIGGERS