S4A GTP-6200 Series User manual

GTP-6200 series Manual
1. Auto-induction Guard Tour System································ 2
2. Auto-induction LCD Display Guard Clocking System·········5
3. Strong Lighting Guard Tour System······························· 8
4. LCD & Lighting Guard Tour System···························· 11
5. Auto-induction Guard Tour System······························14
6. Touch Torch Guard Tour System··································18
7. Auto-induction Guard Tour System······························ 22
8. Wireless communication Guard Tour Reader·················· 27
9. LED lighting Guard Patrol Stick·································· 36
10. Accessories Introduction············································ 41

1
11. Software installation & set-up······································42
System composition
Supplied Accessories
Accessories included with the device
❶Charger;
❷Silicone case;
❸User manual;
❹Software disk;
❺USB cable.
*Accessories recommended for the device
❻Check point;
❼Staff ID tag;
❽PC/laptop;
❾Printer.
❶❷❸
❹
❺
❽
❻
❾
❼

2
1. Auto-induction Guard Tour System
1.1 General features
Read Method: Automatic sensors and Non-touch reading of RFID tag.
Structure: Metal structure, waterproof, durable, resistant to high and low
temperatures.
Direction: LED flash and vibration.
Card-reading Technology: Switzerland EM induction card-reading
technology.
Storage Capacity: 80,000pcs.
Impact record function : Record impact logs up to 32,000pcs.
Date Safety: Data can be stored for 30 years without power.
High speed download: No need to install USB driver , faster and more
stable communication speed .
Battery: Built-in rechargeable lithium battery.
Communication: Pogo pin USB contacts.
1.2 Production introduction
This guard tour reader work with rfid technology, is drop resistant,
waterproof, shockproof. No need wiring and very simple for operation. There
is real time built-in clock inside of device , can generate time stamp
automatically once the reader scan rfid tags . Meanwhile, it work with USB
cable to download data , no need to purchase download station additionally ,
low purchase cost .
Besides, this model is with impact recording function, while the device
is been dropped or beat by force during usage, the device will record the
impact time automatically, which is very helpful for supervisor to check the
impact history of reader .

3
❶Sensor area;
❷LED indicator;
❸Anti-slide area;
❹Label Area;
❺USB port.
1.3 How to use
How to turn on the device: This reader work with built-in battery , so
the factory mode is standby.
How to scan tags: Closing to the check point with the black head of
reader, there will be a
vibration with 3 times blue
light flickers ,which means
scan tag successfully.
❶
❷
❹
❸
❺
There will be a vibration and 3 times blue
light flicker

4
Impact records:
While the reader is subjected to an external force or dropped, the red
and blue light will flash 3 times alternately, and reader will record the impact
time . Impact record can be queried at software. Which is very helpful to
query the impact history of reader.
Delete data: If there are 3 times vibration and 3 times red light flicker while
scan tags, which means the memory of reader is full. Please donwload and
clear data for normal use again.
1.4 How to charge the battery
The device can detect battery voltage automatically, when low battery ,
there will be 10 times red light flicker , which means device is under low
battery mode now, please charge the battery soon by connecting USB cable .
During the battery charging, the red light flashing at different
frequencies according along with voltage change, the lower the voltage, the
faster the flash. The light will turn to blue while fully charged .
1.5 Failure and Solutions
Problem Reason Handling method

5
Vibrate 6 times, and red
light flickers 6 times Time error Connect patrol reader with computer , click “Update time”
Vibrate 3 times, and red
light flickers 3 times Memory is full
Connect patrol reader with
computer, save data to software first
and click “ clear data”
Red light flickers 10 times Low battery Charge the patrol reader with USB
cable or wall charger
2. Auto-induction LCD Display Guard Clocking System
2.1 General features
Read Method: Automatic sensors and Non-touch reading of RFID tag.
Physical: Metal structure, waterproof, durable, resistant to high and low
temperatures
Direction: LED flash, LCD display and vibration.
LCD screen: LCD screen display tags ID, date& time, memory
space ,low battery prompt and other while scanning tags.
Supported language: Simplified and traditional Chinese, English. French
and other languages (tailor made).
Card-reading Technology: Switzerland EM induction card-reading
technology.
Storage Capacity: 80,000pcs
Impact record function : Record impact logs up to 32,000pcs
Date Safety: Data can be stored for 30 years without power.
High speed download: No need to install USB driver , faster and more
stable communication speed .
Battery : Built-in rechargeable lithium battery
Communication: Pogo pin USB contacts
2.2 General introduction
This guard tour reader work with rfid technology ,is drop resistant,
waterproof, shockproof. No need wiring and very simple for operation .
There is real time built-in clock inside of device , can generate time stamp
automatically once the reader scan rfid tags . This model is with a little
screen ,can display records capacity, rfid tags ID number ,date& time , low

6
battery prompt and so on. Meanwhile , it work with USB cable to download
data , no need to purchase download station additionally , low purchase cost .
Besides ,this model is with impact recording function, while the device
is been dropped or beat by force during usage, the device will record the
impact time automatically, which is very helpful for supervisor to check the
impact history of reader .
2.3 Device introduction
❶Sensor area; ❷LED indicator;
❸Display(can display tags ID, scanning time &date, memory , low battery
prompt);
❹Anti-slide area; ❺Label Area; ❻USB port;
2.4 How to use
How to turn on the device : This reader work with built-in battery , so
the factory mode is standby.
How to scan tags: Closing to the check point with the black head of
reader , there will be a vibration with 3 times blue light flickers , and LCD
❶
❷
❺
❹
❻
❸

7
screen will display tag ID, time and memory space ,which means scan tag
successfully.
Impact records:
While the reader is subjected to an external force or dropped , the red
and blue light will flash 3 times alternately, and reader will record the impact
time .At the same time, LCD screen will show time and impact record count.
Impact record can be queried at software. Which is very helpful to query the
impact history of reader .
Delete data: If there are 3 times vibration and 3 times red light flicker while
scan tags, which means the memory of reader is full. Please donwload and
clear data for normal use again.
2.5 How to charge the battery
The device can detect battery voltage automatically, when low battery ,
there will be 10 times red light flicker , which means device is under low
battery mode now, please charge the battery soon by connecting USB cable .
During the battery charging, the red light flashing at different
frequencies according along with voltage change, the lower the voltage, the
faster the flash . The light will turn to blue while fully charged .
2.6 Failure and Solutions
There will be a vibration and 3 times
blue light flicker ,LCD screen on

8
Problem Reason Handling method
Vibrate 6 times, and red
light flickers 6 times Time error Connect patrol reader with computer , click “Update time”
Vibrate 3 times, and red
light flickers 3 times
Memory is
full
Connect patrol reader with
computer, save data to software
first and click “ clear data”
Red light flickers 10
times Low battery Charge the reader with USB cable
3. Strong Lighting Guard Tour System
3.1 General features
Read Method: Automatic sensors and Non-touch reading of RFID tag.
Physical: Metal structure, waterproof, durable, resistant to high and low
temperatures
Direction: LED flash and vibration.
LED lighting : 5 modes supported . Bright light, normal light, low light,
strobe and SOS modes.
Card-reading Technology: Switzerland EM induction card-reading
technology.
Storage Capacity: 80,000 pcs
Impact record function : Record impact logs up to 32,000 pcs
Date Safety: Data can be stored for 30 years without power.
High speed download: No need to install USB driver , faster and more
stable communication speed .
Battery : Built-in rechargeable lithium battery
Communication: Pogo pin USB contacts
3.2 Production introduction

9
❶Sensor area; ❷LED lamp;
❸LED indicator; ❹Lighting switch;
❺Anti-slide area; ❻Label Area; ❼USB port.
3.3 How to use
How to turn on the device : This reader work with built-in battery , so
the factory mode is standby.
How to scan tags: Closing to the check point with the black head of
reader , there will be a vibration with 3 times blue light flickers , which
means scan tag successfully.
LED light function : Press power button once to switch the light mode
( Light will close automatically if keep lighting 2 minutes).
Impact records:
There will be a vibration and 3 times blue light
flicker

10
While the reader is subjected to an external force or dropped , the red
and blue light will flash 3 times alternately, and reader will record the impact
time . Which is very helpful to query the impact history of reader .
Delete data: If there are 3 times vibration and 3 times red light flicker while
scan tags, which means the memory of reader is full. Please donwload and
clear data for normal use again.
3.4 How to charge the battery
The device can detect battery voltage automatically, when low battery ,
there will be 10 times red light flicker , which means device is under low
battery mode now, please charge the battery soon by connecting USB cable .
During the battery charging, the red light flashing at different
frequencies according along with voltage change, the lower the voltage, the
faster the flash . The light will turn to blue while fully charged .
3.5 Failure and Solutions
Problem Reason Handling method
Vibrate 6 times, and
red light flickers 6
times
Time error Connect patrol reader with computer ,
click “Update time”
Vibrate 3 times, and
red light flickers 3
times
Memory is full
Connect patrol reader with computer,
save data to software first and click
“ clear data”
Red light flickers 10
times Low battery Charge the reader with USB cable

11

12
4. LCD & Lighting Guard Tour System
4.1 General features
Read Method: Automatic sensors and Non-touch reading of RFID tag.
Physical: Metal structure, waterproof, durable, resistant to high and low
temperatures
Direction: LED flash ,screen display and vibration.
LED lighting : 5 modes supported . Bright light, normal light, low light,
strobe and SOS modes.
LCD display: LCD screen display tags ID, date& time, memory
space ,low battery prompt and other while scanning tags.
Card-reading Technology: Switzerland EM induction card-reading
technology.
Storage Capacity: 80,000 pcs
Impact record function : Record impact logs up to 32,000 pcs
Date Safety: Data can be stored for 30 years without power.
High speed download: No need to install USB driver , faster and more
stable communication speed .
Battery : Built-in rechargeable lithium battery
Communication: Pogo pin USB contacts
4.2 Production introduction
❶Sensor area;
❷LED Indicator;
❸Screen;
❶
❷
❸
❹
❺
❻
❼
❽

13
❹Label Area
❺LED Lamp;
❻Lighting Switch;
4.3 How to use
How to turn on the device : This reader work with built-in battery , so
the factory mode is standby.
How to scan tags: Closing to the check point with the black head of
reader , there will be a vibration with 3 times blue light flickers together with
LCD display tags ID , which means scan tag successfully.
LED light function :
Switch on : Long pressing the torch icon lightly and loose it till
LED light on.
Switch off: Press torch icon for once to switch off the light
Light mode change : Every time when model changed, then switch light to
other mode.
There will be a vibration and 3 times blue light
flicker

14
Impact records:
While the reader is subjected to an external force or dropped , the red
and blue light will flash 3 times alternately, and reader will record the impact
time . Which is very helpful to query the impact history of reader .
Delete data: If there are 3 times vibration and 3 times red light flicker while
scan tags, which means the memory of reader is full. Please donwload and
clear data for normal use again.
4.4 How to charge the battery
The device can detect battery voltage automatically, when low battery ,
there will be 10 times red light flicker , which means device is under low
battery mode now, please charge the battery soon by connecting USB cable .
During the battery charging, the red light flashing at different
frequencies according along with voltage change, the lower the voltage, the
faster the flash . The light will turn to blue while fully charged .
4.5 Failure and Solutions
Problem
Reason
Handling method
Vibrate 6 times, and
red light flickers 6
times
Time error
Connect patrol reader with computer ,
click “Update time”
Vibrate 3 times, and
red light flickers 3
times
Memory is full
Connect patrol reader with computer,
save data to software first and click
“ clear data”
Red light flickers 10
times
Low battery
Charge the reader with USB cable

15
5. Auto-induction Guard Tour System
System composition
Supplied Accessories
Accessories included with the device
❶USB cable (A or B);
❷User manual;
❸Software disk;
*Accessories recommended for the device
❹Charger plug;
❺Check point;
❻Staff ID tag;
❼PC/laptop;
❽Printer.

16
5.1 General features
Read Method: Automatic sensors and Non-touch reading of RFID tag.
Structure: flexible rubber shell.
Direction: LED flash and vibration.
Card-reading Technology: Switzerland EM induction card-reading
technology.
Storage Capacity: 40,000pcs.
Impact record function : Record impact logs up to 8,000pcs.
Date Safety: Data can be stored for 30 years without power.
High speed download: No need to install USB driver , faster and more
stable communication speed .
Battery : Built-in rechargeable lithium battery.
Communication: Pogo pin USB contacts or Mini USB contacts optional.
5.2 Production introduction
This guard tour reader work with rfid technology ,is drop resistant,
waterproof, shockproof. No need wiring and very simple for operation .
There is real time built-in clock inside of device , can generate time stamp
automatically once the reader scan rfid tags . Meanwhile , it work with USB

17
cable to download data , no need to purchase download station additionally ,
low purchase cost .
Besides ,this model is with impact recording function, while the device
is been dropped or beat by force during usage, the device will record the
impact time automatically, which is very helpful for supervisor to check the
impact history of reader
❶USB port;
❷LED indicator;
❸Anti-slide grip;
❹Label Area;
❺Sensor area.
5.3 How to use
How to turn on the device : This reader work with built-in battery , so
the factory mode is standby.
How to scan tags: Closing to the check point with the black head of
reader , there will be vibration with 3 times blue light flickers ,which means
scan tag successfully.
There will be vibration and 3 times blue light
flicker
❶
❷
❸
❹
❺

18
Impact records:
While the reader is subjected to an external force or dropped , the red
and blue light will flash 3 times alternately, and reader will record the impact
time . Impact record can be queried at software. Which is very helpful to
query the impact history of reader .
Delete data: If there are 3 times vibration and 3 times red light flicker while
scan tags, which means the memory of reader is full. Please donwload and
clear data for normal use again.
5.4 How to charge the battery
The device can detect battery voltage automatically, when low battery ,
there will be 10 times red light flicker , which means device is under low
battery mode now, please charge the battery soon by connecting USB cable .
During the battery charging, the red light flashing at different
frequencies according along with voltage change, the lower the voltage, the
faster the flash . The light will turn to blue while fully charged .
5.5 Failure and Solutions
Problem
Reason
Handling method

19
Vibrate 6 times, and red
light flickers 6 times
Time error
Connect patrol reader with
computer , click “Update time”
Vibrate 3 times, and red
light flickers 3 times
Memory is full
Connect patrol reader with
computer, save data to software first
and click “ clear data”
Red light flickers 10 times
Low battery
Charge the patrol reader with USB
cable or wall charger
6. Touch Torch Guard Tour System
System composition
Supplied Accessories
Accessories included with the device
❶USB cable;
❷User manual;
❸Software disk;
*Accessories recommended for the device
❹Check point;
❺Staff ID tag;