saco ZWF 71463W User manual

Operating Instructions - Washing machine ZWF 71463W
Control panel
1) On/Off button
2) Programme selection touch pad
3) Temperature touchpad
4) Spin selection touch pad
5) Options selection touchpad
6) Start/pause touchpad
7) Finish in touchpad
8) Display
9) Door locked indicator
Display
A) The time area:
1.25: the programme duration
3h: the "finish in" time
E20: the alarm codes
Err: the message of error
0: the programme is completed.
B) The child lock indicator:
The indicator comes on when you activate this device
C) The extra rinse indicator
D) The finish in button

Programmes chart
Programme options compatibility
Options
Temperature
•With this option you can change the default temperature.
•Indicator = cold water.
•The indicator of the set temperature comes on.
Spin
•With this option you can change the spin speed
•Additional spin options:

No Spin
•Set this option to deactivate all spin phases. Only the drain phase is available.
•The related indicator comes on.
•Set this option for very delicate fabrics.
Rinse Hold
•Set this option to prevent laundry creases
•There is water in the drum when the programme is completed
•The drum turns regularly to prevent creases
•The door stays locked. You must drain the water to unlock the door.
Quick
•With this option you can decrease the programme duration.
•Use this option for items with light soil or items to refresh.
Intensive
•With this option you can wash very soiled laundry.
•The washing cycle lasts longer with this option. The related indicator comes on.
Easy Iron
•The appliance carefully washes and spins the laundry to prevent the creases.
•The appliance decreases the spin speed, uses more water and adapts the programme duration to the type of
laundry.
•The related indicator comes on.
Rinse Only
•With this option you can perform only a last rinse of a selected washing programme.
•If you set also the Extra Rinse function ) the appliance adds two or more rinses.
•The related indicator comes on.
Drain & Spin
•With this option you can the spin and drain cycle.
•The spin phase is suitable to the washing programme you set.
Finish In
•With this option you can set the number of hours in which you would like your washing programme to be
completed.
•You can set from minimum 3 hours to maximum 20 hours.
•The display shows the number of hours and the indicator above the button is on.
Extra Rinse
•With this option you can add some rinses to a washing programme.
•Use this option for persons allergic to detergents and in areas where the water is soft.
•The related indicator comes on.
Settings
Extra Rinse

•With this option you can permanently have an extra rinse when you set a new programme.
•To activate/deactivate this option touch the buttons and at the same time until comes on/off.
Child Lock
With this option you can prevent that the children play with the control panel.
•To activate/deactivate this option, touch the buttons and at the same time until the indicator comes
on/goes off.
Acoustic signals
The acoustic signals operate when:
•The programme is completed.
•The appliance has a malfunction.
•To deactivate/activate the acoustic signals, touch the buttons and at the same time for 4 seconds.
Setting a programme
Touch the programme button and set the programme:
•The indicator of the button flashes.
•The display shows the programme duration.
If necessary, change the temperature and the spin speed or add available options. When you activate an option, the
indicator of the set option comes on.
Setting a programme without a finish In option
Touch the button
•The indicator of the button stops to flash and stays on.
•The programme starts, the door locks,
•the indicator is on.
•The drain pump can operate for a short time at the beginning of the washing cycle.
Starting a programme with the Finish In option
Touch the button again and again to choose the number of hours in which you want the washing cycle to be
finished
The display shows the number of hours you set and the indicator above the button is on to show that his option
is active.
Touch the button:
•The door is locked.
•The appliance starts the countdown.
When the countdown is completed, the programme starts.
To cancel the Finish In option:
•Touch the buttonto set the appliance to pause. The indicator of button flashes.
•Touch the button until the indicator goes off.
•Touch the button again to start the programme immediately.

Cancelling a programme
•Press the button for some seconds to cancel the programme and to deactivate the appliance.
•Press the same button again to activate the appliance. Now, you can set a new washing programme.
To open the door during the first minutes of the cycle (or when the operates):
•Touch the button to pause the appliance.
•Wait until the indicator goes off.
•You can open the door.
•Close the door and touch the button again
•The programme (or the ) continues.
At the end of the programme
•The appliance stops automatically.
•The acoustic signal operates (if it is activated).
•In the display comes on.
•The indicator of the button goes off.
•The door lock indicator goes off.
•You can open the door.
•Remove the laundry from the appliance.
•Press button for some seconds to deactivate the appliance.