SAFAVIEH COUTURE Johnny CTL1036A User manual

WARNING
*This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of electric
shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in the outlet, reverse the plug, if it still
does not fit, contact a qualified electrician.
*Never use with an extension cord unless the plug can be fully inserted. do not attempt to defeat this safety feature.
CARE AND MAINTENANCE
Model# CTL1036A
Product Dimensions: 15"Lx15"Wx30"H
*Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to the
material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for
safe use and installation
* The external flexible cable or cord of this luminaire cannot be replaced
*
If
the
cord
is
damaged,
the
luminaire
shall
be
destroyed
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY
A Lamp base 1X F Shade 1X
B Neck 1X G Finial 1X
C Saddle 1X H Bulb 1X
D Socket 1X J EVA 1X
E Harp 1X
1/2

PREPARATION
* Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
* If any part is missing or damaged, do not attempt to assemble the product.
* Estimated Assembly Time: 6 minutes.
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email [e-mail]
NOTE: PLEASE USE DIMMABLE TYPE"A" BULB MAX 100-WATT OR LED BULB MAX 12-WATT，THERE IS LED 9-WATT BULB IN THE BOX
Step 1:First pull the line down according to the figure above (1),
Then pull the line to the right according to the figure above (2),Pull
power cord to connect the Neck (B) to the Base (A).Screw the Neck
(B) onto the Lamp base (A),Be careful not to twist the power cord
and tighten securely,And finally stick EVA(J) on the base.
Step2: Insert the Harp (E) into the Saddle (C).Put the
shade(F) on the Harp(E),then tighten the Finial (G)into
the Harp (E),Insert the bulb(H) into the socket(D).
Step3: Put the light on a level surface to check if
everything is stable.
1
2
A
D
C
B
J
1
2
G
F
A
H
E
D
C
B
J
2/2