Safavieh Lighting HOPPER TBL4060 User manual

CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an
appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate
to the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE & IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
* Thi it h ld b bl d ft f t t t hi th fi i h d i bl
Model# TBL4060
Product Dimensions: 16
*
16
*
32
"
H
* This item should be assembled on a soft surface to prevent scratching the finish during assembl
y
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline
below for safe use and installation
*The external flexible cable or cord of this luminaire cannot be replaced;
If the cord is damaged, the luminaire shall be destroyed
P
ro
d
uc
t
Di
mens
i
ons:
16*16*32"H
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in
the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. never use with an extension
cord unless the plug can be fully inserted. do not attempt to defeat this safety feature.
Part List and Hardware List
cord
unless
the
plug
can
be
fully
inserted
.
do
not
attempt
to
defeat
this
safety
feature
.
PIECE DESCRIPTION PICTURE QUANTIT
Y
PIECE DESCRIPTION PICTURE QUANTITY
A Lamp base 1X F Shade 1X
B Saddle 1X G Finial 1X
C Socket 1X H Bulb 1X
DHarp 1X

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware
contents list. If any part is missing or damaged, do not attempt to assemble the product.
contents
list
.
If
any
part
is
missing
or
damaged
,
do
not
attempt
to
assemble
the
product
.
Estimated Assembly Time: 6 minutes.
PLEASE USE ON/OFF TYPE"A" BULB MAX 100-WATT OR CFL BULB MAX 23-WATT OR LED BULB MAX 12-WATT
THERE IS LED 9-WATT BULB IN THE BOX
Step 1 Step2
Insert the harp (D) into the saddle (B)
Put the light on a level surface to check
Insert
the
harp
(D)
into
the
saddle
(B)
.
Put
the
light
on
a
level
surface
to
check
Put the shade(F) on the harp(D),then if everything is stable.
tighten the finial (G)into the harp (D)
Insert the bulb(H) into the socket(C).
ENJOY YOUR LAMP
ENJOY
YOUR
LAMP