Safavieh Lighting KAIRI FLL4128A User manual

PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY
A Lamp Body 1X H Harp 1X
B Wrench 1X I Bulb 1X
C Screw 16X J Finial 1X
D Lamp Body 4X K Top Ring 1X
E Lamp body 1X L Shade 1X
F Saddle 1X M Bottom Ring 1X
G Socket 1X
Model# FLL4128A
Product Dimensions: 16x16x58.75"H
Part List and Hardware List
WARNING
This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of electric
shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in the outlet, reverse the plug, if it still
does not fit, contact a qualified electrician.never use with an extension cord unless the plug can be fully inserted. do not
attempt to defeat this safety feature.
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to the material.
Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use and
installation
*The external flexible cable or cord of this luminaire cannot be replaced;
*If the cord is damaged, the luminaire shall be destroyed
1/3

PREPARATION
* Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
* If any part is missing or damaged, do not attempt to assemble the product.
* Estimated Assembly Time: 6 minutes.
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email [email protected]
NOTE: PLEASE USE ON/OFF TYPE"A" BULB MAX 100-WATT OR LED BULB MAX 12-WATT. THERE IS LED 9-WATT BULB IN THE BOX
Step 1: Place the body (D) on the body (A).Screw (C) onto the
lamp body using a wrench (B).Put the body (E) on the body (D).
Screw (D) onto the lamp body using a wrench (B).Be careful not
to twist the power cord and tighten securely
Step2: Insert the Harp (H) into the Saddle (F).Put the shade(K)
on the Harp(H).then,tighten the Finial (J) into the Harp
(H).Insert the bulb(I) into the socket(G).
Step3: Put the light on a level surface to check if everything is
stable.
2/3

FOR SHADE
Spider under the ring
Step 1: Hold the lamp shade (L) and push the Top ring (K) into
the 5 metal buckles one by one, (Top ring as below direction).
Step2:Push the Bottom Ring (M) into the 5 metal buckles one
by one until lock to the ring securely and form a shade.
Step3:Push the Bottom Ring (M) into the 5 metal buckles one
by one until lock to the ring securely and form a shade.
Step 1: 1. Carefully remove the coiled Lamp Shade from box and remove all plastic coverin
Combine two sides of shade (L) together with velcro to extend it.
3/3