Safavieh Lighting LEENA TBL4034A User manual

CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to
the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
1/2
Model# TBL4034A
Product Dimensions: 13" X 7" X 21.25"H
the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
Product Dimensions: 13" X 7" X 21.25"H
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below
for safe use and installation
*The external flexible cable or cord of this luminaire cannot be replaced;
If the cord is damaged, the luminaire shall be destroyed
If the cord is damaged, the luminaire shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in the
outlet, reverse the plug, if it still does not fit, contact a qualified electrician. never use with an extension cord
unless the plug can be fully inserted. do not attempt to defeat this safety feature.
unless the plug can be fully inserted. do not attempt to defeat this safety feature.
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY
1X
Bulb
PIECE DESCRIPTION PICTURE QUANTITY
A
1X
BLamp Boby
C1X
Base
1/2

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware
contents list. If any part is missing or damaged, do not attempt to assemble the product.
2/2
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 6 minutes.
PLEASE USE TYPE"A" BULB MAX 60-WATT OR CFL BULB MAX 13-WATT OR EDISON MAX 60-WATT OR LED MAX 9-
WATT
THERE IS 1* EDISON 25-WATT BULB IN THE BOX
THERE IS 1* EDISON 25-WATT BULB IN THE BOX
A
B
C
B
Step 1
Pull power cord to connect the Lamp Body (B) to the Base (C).
Pull power cord to connect the Lamp Body (B) to the Base (C).
Screw the bottom threaded portion of the Lamp Body (B) into the Base (C)
Insert the Bulb(A) into the socket.
Be careful not to twist the power cord and tighten securely
ENJOY YOUR LAMP
A
C
B
ENJOY YOUR LAMP
A
C
B
2/2