Safavieh Lighting LIT4470A User manual

PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY
C Shade 3X
D Socket ring 3X
B Base 1X E Bulb 3X
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of
electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in the outlet, reverse the plug,
if it still does not fit, contact a qualified electrician. Never use with an extension cord unless the plug can be fully inserted.
do not attempt to defeat this safety feature.
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to the material.
Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
Model# LIT4470A
Product Dimensions: 33.5"Lx 20"W x 69"H
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use
and installation
*The external flexible cable or cord of this luminaire cannot be replaced;
If the cord is damaged, the luminaire shall be destroyed
Part List and Hardware List
A
Body
1X
1/2

Step 1 Step2 Step3
Unpack all parts from cartons carefully. Put on shade (C) and secure it in place Put the light on a level surface to check
According the assembly sequence above, using the Socket ring(D).
if everything is stable.
Make sure all parts could be aligned before assemble Insert the bulb(E) into the socket.
DO not rotate lamp body too hard avoid base screw broken
Screw the Lamp body (A3) onto the Lamp body (A2)
Screw the Lamp body (A2) onto the Lamp body (A1)
Screw the Lampbody (A1) onto the Lampbase (B)
Be careful not to twist the power cord and tighten securely.
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part
is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 6 minutes.
PLEASE USE ON/OFF TYPE "B" BULB MAX 40-WATT OR CFL BULB MAX 9-WATT
THERE ARE 3PC 25-WATT BULB IN THE BOX.
ENJOY YOUR LAMP
PREPARATION
1
2
3
2/2