Safavieh Lighting SANTINA FLL7007A User manual

NOTICE
* Please make sure that you have all parts indicated and they are in good condition before you begin assembly of this item.
Refer to part list and hardware list below for guidance.
* This item should be assembled on a soft surface to prevent scratching the finish during assembly.
* This item may require periodic tightening.
PREPARATION
Model#FLL7007A
Product Dimensions:
13.25"Lx11"Wx65"H
*Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and
hardware contents list.
* If any part is missing or damaged, do not attempt to assemble the product.
* Estimated Assembly Time: 10 minutes.
* If you are having difficulty, our friendly Customer Care team is always here to help.
Please email [e-mail].
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to the
material.Avoid the use of chemicals and household cleaners as they may damage the finish.
Part List and Hardware List
PEICE
DESCRIPTION
PICTURE
QUANTITY
PEICE
DESCRIPTION
PICTURE
QUANTITY
A Bend pipe 1X H Socket 1X
B Pipe1 1X I Shade 1X
C Pipe2 1X J Ring 1X
D Pipe3 1X K Bulb 1X
E Pipe4 1X HW1 Wrench 1X
F LAMP BASE 1X
1/2

PREPARATION
* Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list.
* If any part is missing or damaged, do not attempt to assemble the product.
* Estimated Assembly Time: 10 minutes.
Step 1:Install the bend pipe(A) into Pipe1(B), install Pipe1(B)
into Pipe2(C). Then install Pipe3(D) and Pipe4(E) step by step, at
last, install pipe4(E) into the Base(F) and lock it with
wrech(HW1). Be careful not to twist the power cord and
tighten securely.
Step 2:Put the shade(I) into the Socket(H), and lock with Ring(J). Step 3:Put the Light bulb(K) into the socket(H). Put the light on a
level surface to check if everything is stable.
2/2