Safavieh Lighting THERA FLL4130 User manual

WARNING
This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in
the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an
extension cord unless the plug can be fully inserted. do not attempt to defeat this safety feature.
CARE AND MAINTENANCE
Model# FLL4130
Product Dimensions: 26"L X
13"W X 66.25"H
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an
appropriate vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods
appropriate to the material. Avoid the use of chemicals and household cleaners as they may damage the
finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline
below for safe use and installation
* The external flexible cable or cord of this luminaire cannot be replaced
* If the cord is damaged, the luminaire shall be destroyed
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY
A Nut 1X E Shade 1X
B Lamp base 1X F Socket Ring 1X
C Lamp body 1X G Bulb 1X
D Socket 1X
1/2

PREPARATION
* Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware
contents list.
* If any part is missing or damaged, do not attempt to assemble the product.
* Estimated Assembly Time: 20 minutes.
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email [email protected]
NOTE: PLEASE USE ON/OFF TYPE"A" BULB MAX 100-WATT OR LED BULB MAX 12-WATT, THERE IS LED 9-WATT BULB IN THE BOX
Step 1: Insert Lamp body (C4) into Lamp body (C5). Screw the Lamp
body (C3) onto the Lamp body (C4). Screw the Lamp body (C2) onto
the Lamp body (C3). Screw the Lamp body (C1) onto the Lamp body
(C2). Screw Lamp body (C1) onto the nipple of the Lamp base (B)
and secure with a nut (A) from the bottom of Lamp Base. Be careful
not to twist the power cord and tighten securely.
Step2: Screw the Lamp body (C6) onto the Lamp body
(C5). Put the shade (E) on the socket (D), then tighten
the Socket ring (F) . Insert the bulb (G) into the socket
(D).
Step3: Put the light on a level surface to check if
everything is stable.
2/2