Safavieh Lighting VIOLETTA FLL4041A User manual

CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to
the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE & IMPORTANT SAFETY INSTRUCTIONS
Model# FLL4041A
Product Dimensions: 20.5"Lx 8"Wx
57.5"H
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below
for safe use and installation
*The external flexible cable or cord of this luminaire cannot be replaced;
If the cord is damaged, the luminaire shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully i the
outlet, reverse the plug, if it still does not fit, contact a qualified electrician. never use with an extension cord
unless the plug can be fully inserted. do not attempt to defeat this safety feature.
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY
A Bulb 1X F Tube 1X
B Socket ring 1X G Screw 2X
C Shade 1X H Tool 1X
D Body 1X I Base 1X
E Tube 1X J Switch and cord 1X

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 20 minutes.
PLEASE USE ON/OFF TYPE"A" BULB MAX 60-WATT OR CFL BULB MAX 13-WATT OR LED BULB MAX 9-WATT
THERE IS LED 4-WATT BULB IN THE BOX
Step 1
Put the lamp base ( I ) on the table .
(1) Rotate the tube ( E ) into body ( D )
(2) Rotate the tube ( F )into tube ( E )
(3) Insert the tube ( F )into base ( I )
(4) Gently pull the cord ( J ) and insert
the tube ( F ) into base tube.
(5) put screw(G) into the base ( I ) tube ,
and fix them by tool(H ).
(6) put the shade(C )on the body socket .
(7) Tighten the shade by socket ring(B).
(8) insert the bulb into the socket.
Step2
Put the light on a level surface to check
if everything is stable.
ENJOY YOUR LAMP