Safavieh Lighting VYNN TBL4507 User manual

WARNING
*This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in
the outlet, reverse the plug, if it still does not fit, contact a qualified electrician.
*Never use with an extension cord unless the plug can be fully inserted. do not attempt to defeat this
safety feature.
CARE AND MAINTENANCE
Model# TBL4507
Product Dimensions: 10.5"Lx 10.5"W x 19"H
*Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an
appropriate vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the
methods appropriate to the material. Avoid the use of chemicals and household cleaners as they may
damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline
below for safe use and installation
* The external flexible cable or cord of this luminaire cannot be replaced
* If the cord is damaged, the luminaire shall be destroyed
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY
A Lamp base 1X E Bulb 1X
B Neck 1X F USB 1X
C Socket 1X G
D Shade 1X H

PREPARATION
* Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
* If any part is missing or damaged, do not attempt to assemble the product.
* Estimated Assembly Time: 6 minutes.
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email [email protected]
PLEASE USE ON/OFF TYPE"A" BULB MAX40-WATT OR LED BULB MAX 9-WATT.THERE IS LED 4-WATT BULB IN THE BOX
Step1: Insert the shade (D) into the socket(C). Step2: Insert the bulb(E) into the socket(C). Step3: Put the light on a level surface to check if
everything is stable.