Safavieh Lighting LIT4303A User manual

PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY
A Bottom Base 1X F Shade 1X
B Lamp Body 1X G Finial 1X
C Saddle 1X H Tool 1X
D Socket 1X I Screw 2X
E Harp 1X J Bulb 1X
Model# LIT4303A
Product Dimensions: 16"L X 11 "W X 60"H
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to the
material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTIC E& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe
use and installation
*The external flexible cable or cord of this luminaire cannot be replaced;
If the cord is damaged, the luminaire shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of
electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in the outlet, reverse the
plug, if it still does not fit, contact a qualified electrician. never use with an extension cord unless the plug can be fully
inserted. do not attempt to defeat this safety feature.
Part List and Hardware List

Step 1 Step2 Step3
Place the Lamp Body (B) to align with the bottom of Base(A) Insert the Harp (E) into the Saddle (C). Put the light on a level surface to check
Use the Tool (H) to screw the Screw(I) into the Bottom Base(A)
Put the Shade(F) on the Harp(E), then if everything is stable.
and Lamp Body(B) till tight
tighten the Finial (G) into the Harp (E)
Be careful not to twist the power cord and tighten securely
Insert the Bulb(J) into the Socket(D).
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If
any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 6 minutes.
ENJOY YOUR LAMP
11
12
3