Safavieh LIT4483A User manual

CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to
the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
Model# LIT4483A
Product Dimensions: Ø11.8" X 59.5"H
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below
for safe use and installation
*The external flexible cable or cord of this luminaire cannot be replaced;
If the cord is damaged, the luminaire shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in the
outlet, reverse the plug, if it still does not fit, contact a qualified electrician. never use with an extension cord
unless the plug can be fully inserted. do not attempt to defeat this safety feature.
Part List and Hardware List
1X
1X
1X
F1X
3X
Finial
PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY
A
B
C
E
DH
1X
1X
G
27X
Shade Spider
Top Tube
Lampbody
Bottom Tube
Base
Bulb
Capiz Strand
1 / 2

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part
is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 6 minutes.
PLEASUE USE ON/OFF TYPE"B" BULB MAX 40-WATT OR CFL BULB MAX 9-WATT
THERE ARE 3PCS TYPE"B" BULBS 25-WATT IN THE BOX
Step 1 Step2 Step3
Make sure all parts could be aligned before assemble Insert the Shade Spider(B) into the threaded Insert the hook of each Capiz Strand(H) into the
Do not rotate lamp body too hard avoid base screw broken portion of the Top Tube(C) and fix it by turing hole of the Shade Spider(B) as diagram.
Screw the Bottom Tube (E) into the Base (F) the Finial(A) clockwise. Insert the Bulb(G)into the socket.
Screw the Lampbody (D) into the Bottom Tube (E)
Screw the Top Tube (C) into the Lampbase (D)
Be careful not to twist the power cord and tighten securely
ENJOY YOUR LAMP
CAUTION:Cut the “H” plastic buckles with scissor when take down the PE bags
A
B
C
E
F
B
C
B
A
D
H
G
C
D
E
F
2 / 2