Safavieh NOBEL User manual

WARNING
*This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in
the outlet, reverse the plug, if it still does not fit, contact a qualified electrician.
*Never use with an extension cord unless the plug can be fully inserted. do not attempt to defeat this
safety feature.
CARE AND MAINTENANCE
Model# TBL4453-U
Product Dimensions: 6"L x 10.75"W x 17.5"H
*Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an
appropriate vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods
appropriate to the material. Avoid the use of chemicals and household cleaners as they may damage the
finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline
below for safe use and installation
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY
A Lamp body 1X D Out ring 1X
B Socket 1X E Bulb 1X
C Shade 1X F USB 1X

PREPARATION
* Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
* If any part is missing or damaged, do not attempt to assemble the product.
* Estimated Assembly Time: 6 minutes.
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email [email protected]
PLEASE USE ON/OFF TYPE"A" BULB MAX 25-WATT OR LED BULB MAX 9-WATT, THERE IS LED 4-WATT BULB IN THE BOX
Step 1: Place the Lamp body (A) on a table. Put the Shade (C) on the socket (B),
then tighten the Out ring (D) on it. Insert the Bulb (E) into the Socket (B).
Step2: Put the light on a level surface to check if everything is stable.