Safavieh RENATO FLL4006A User manual

WARNING
This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of electric shock. this plug
will fit in a polarized outlet only one way. if the plug does not fit fully in the outlet, reverse the plug, if it still does not fit, contact a
qualified electrician. Never use with an extension cord unless the plug can be fully inserted. do not attempt to defeat this safety feature.
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate vacuum-brush
attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to the material. Avoid the use of
chemicals and household cleaners as they may damage the finish.
Model# FLL4006A
Product Dimensions: 13.5"LX13.5"WX63.5"H
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use
and installation
* The external flexible cable or cord of this luminaire cannot be replaced
* If the cord is damaged, the luminaire shall be destroyed
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY
A.B.C Lamp body tube 1X F shade 1X
D Lamp base 1X G socket 1X
E Bulb 1X H cord and switch 1X
1/2

PREPARATION
* Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
* If any part is missing or damaged, do not attempt to assemble the product.
* Estimated Assembly Time: 6 minutes.
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email [email protected]
NOTE: PLEASE USE ON/OFF TYPE"A"BULB MAX 25-WATT OR CFL BULB MAX 13-WATT OR LED BULB MAX 5-WATT THERE IS 1PC LED 4-WATT BULB IN THE BOX
Step1: Insert the tube(C)into (B) and (A) in order.Gently pull the cord (H)so that the
body(A,B,C).comes into contact with the base(D).screw the body to the base.Insert
the bulb(E)in to the socket.then screw the shade(F) on the top of the socket(G).
If want to change the bulb you need hold the acrylic shade (G) losse from the metal
shade(E).
Step2: Put the light on a level surface to check if every thing is stable.
2/2