7
EN
OPERATING YOUR SAGE®PRODUCT
BEFORE FIRST USE
Remove and safely discard any packaging material
or promotional labels attached to your kettle. It is
recommended that before rst use to ll the kettle
to the maximum level, bring to the boil by selecting
the BOIL 100° button, then discard the water.
OPERATION OF YOUR KETTLE
1. Fill with the desired amount of water.
NOTE
Always ll the kettle between the minimum
(500ml) and maximum (1700ml) marks
on the water window.
2. Ensure the lid is closed and locked rmly
into place. Position the kettle securely onto
the power base. Insert the power plug into
a 230/240 power outlet and switch on.
NOTE
If the START / CANCEL button is pressed
(before selecting a temperature button),
the START / CANCEL button surround
will illuminate in red and the 100° button
surround will illuminate and the kettle will
start heating.
3. Select the desired temperature.The
selected button and the START / CANCEL
button surround will illuminate in white.
4. Press the START / CANCEL button. Do
not remove the kettle from the power base
during operation. Ensure the kettle has
switched o after the water has boiled or
the selected temperature has been reached
before removing the kettle from the power
base. If the kettle is removed from the power
base during the KEEP WARM function the
kettle will automatically switch o.
5. When the kettle has heated the water to the
selected temperature, 3 beeps will sound.
6. If the KEEP WARM function has been
selected, the KEEP WARM button surround
will remain illuminated in red, the selected
temperature button surround will remain
illuminated in white, and the kettle will
maintain the desired setting for 20 minutes.
SAFETY BOIL DRY PROTECTION
The kettle is tted with a safety device, which
protects against overheating should the appliance
be operated with insucient water. If this occurs
the kettle will stop heating. Switch O at the power
point and allow kettle to cool before relling.
The safety device will automatically reset when
the kettle has cooled down.
Always switch o at the power outlet and unplug
the appliance from the power outlet before cleaning.
REMOVABLE FILTER
The Smart Kettle™features a removable mesh
lter to remove scale deposits for cleaner water.
To clean the scale deposits from the lter,
remove the lter by opening the lid and sliding
the lter up and out of the kettle.
The lter can be cleaned by placing under
running hot water and rubbing with a cleaning
cloth or brush. To replace the lter, simply slide
the lter down into the slot behind the spout
of the kettle and push back into position.
NOTE
The lter could become damaged with
time, so please check regularly and
replace if found damaged.
