7
camera will be active. The LCD display will show the
status of resolution and then show the number of
photos taken. Then you may download them into your
PC.
2. Find the image you would like to shoot and center the
image in the viewfinder.
3. Hold the camera steadily, and press the shutter button
to take photos (For optimum quality, please make
sure the subject is 5 feet from the camera lens.)
4. When you hear the buzzer beep once, (which
indicates that you have just taken a photo), you can
continue taking other photos;
5. If you press the Shutter button once and the buzzer
rings out twice, then you cannot take any photos at
this moment. Please download the photos into the PC
first. Alternatively, you can use the “Delete Button” to
select “ ” (to delete all of the photos in the cameras
memory) or “ ” (to delete the last photo taken) in
order to continue using the camera. When you see
either the ” or symbols, press the shutter button and
you will delete your photo or photos.
Note: When taking photos, the louder sound indicates a
successful photo taken; a lower sound beep indicates
the last photo taken was not taken properly.
Wake Up the Camera
If the digital camera is in the energy saving mode, please
hold down the Shutter Button for 5 seconds to wake up the
