Salind 08 User manual

21
Read the instructions carefully before using the GPS tracker
for the first time. Keep the instructions somewhere safe in
case you may need it in the future. However, do not hesitate
to contact us if you have any problem or doubt via WhatsApp,
chat or email.
… for ordering our GPS Tracker!
Thank you very much,
2

22
1. Scope of delivery ......................................4
2. Product description ..................................5
3. Activation .............................................6
4. Startup operations....................................7
5. Turning on ............................................8
6. Use ...................................................9
7. Technical data .......................................10
8. Safety instructions ...................................11
9. Instructions for disposal of used batteries ...........16
10. Instructions for disposal of electrical devices ......18
Contents
3

23
The scope of delivery includes:
 Salind 08
 M2M SIM card (already in place, not interchangeable)
Scope of delivery
1.
4

24
SIM Card
(already in place, not
interchangeable)
2.
Product description
2.
SIM card slot
5
1.
*Both the SIM card and the SIM card slot can be found
under the sticker on the device.
3. OBD interface

25
In order to start using your Salind GPS tracker, first you will have to
activate it online. Please enter the following link:
Activation
3.
NOTE!
To activate you need the device ID. Please make a note before
installing your GPS tracker.
www.start.finder-portal.com
You also find further details of the activation pro-
cess in the following link:
https://www.youtube.com/watch?v=r3t7ugoiXVQ
(You may use the subtitle option on YouTube in
order to translate audio).
6

26
Please observe the following points before connecting the device
to the vehicle battery:
•The SIM card is already in the Salind 08.
•No other components of your vehicle should be damaged by the
attachment.
• The Salind 08 tracker will be connected to the OBD port of your
car (see image).
Startup operations
4.
7

27
Turning on
After connecting and starting the GPS
Tracker for the first time, it is recom-
mended to move the device for a few
minutes. Drive your vehicle a few kilo-
meters so that the device can dial into
the best possible network for the initial
connection.
After a successful activation you can switch on the Salind 08.
By connecting the GPS tracker to the power supply the de-
vice has already been switched on.
5.
8

28
As soon as your device has been successfully activated and
started, you are ready to track your device. Choose and use your
phone, tablet or PC to start tracking it in the PAJ GPS FINDER
portal! Download the PAJ FINDER portal App or enter the
following link to the desktop version:
finder-portal.com
Use
6.
9

29
Dimensions 52,4 mm x 46,4 mm x 22,7 mm
GPS accuracy Up to 5 meters
Battery 3,7 V 140 mAh Li-ion
Time to start Coldstart: 3-5 min
Standby: 1-3 min
In operation: 10-30 s
Weight 45 g
Network GSM/GPRS/LTE
Band LTE/4G
LTE-FDD: B1/B2/B3/B5/B7/B8/B20 (max. 2 W)
GPRS
GSM 900 MHz. (max. 2 W)
DCS 18000 MHz. (max.1 W
GPS chip AT6558D
GSM/ GPRS module SIMCOM A7670E
GPS reception -162 dBm
OBD connection 12-24 V
Storage temperature from -20°C up to +50°C
Operating environment from -20°C up to +50°C
7.
Technical data
10