Samsung BD-E5700 User manual

<•
r•••••·
, ·· ··)'(' B
-ray™
Disc
the
possibilities
Thank
you
for
purchasing
this
Samsung
product.
To
receive
more
complete
service,
please
register
your
product
at
www.samsung.com/register
ENGLISH

Safety Information
Warning
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The lighting flash and Arrowhead
within the triangle is a warning sign
alerting you of dangerous voltage
inside the product.
CAUTION: TO REDUCE THE RISK The explanation point within the
triangle is a warning sign alerting
you of important instructions
accompanying the product.
OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK) NO USER
SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE
PERSONNEL.
WARNING
• To reduce the risk of fire or electric shock,
do not expose this appliance to rain or
moisture.
FCC NOTE (for U.S.A)
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on.
The user is encouraged to try to correct the
interference by one or more of the following
measures.
12 English
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Connect this equipment into an outlet on
acircuit different from that to which the
receiver is connected.
•
Consult the dealer or an experienced radio/
TV technician for help.
• This class B digital product meets all
requirements of the Canadian Interference-
Causing Equipment Regulations.
Note to CATV system installer
This reminder is provided to call CATV
system installer's attention to Article 820-
40 of the National Electrical Code (Section
54 of Canadian Electrical Code, Part I) that
provides guidelines for proper grounding and,
in particular, specifies that the cable ground
shall be connected to the grounding system
of the building as close to the point of cable
entry as practical.
CLASS 1 LASER PRODUCT
This Compact Disc player is classified as a
CLASS 1 LASER product. Use of controls,
adjustments or performance of procedures
other than those specified herein may result in
hazardous radiation exposure.
Complies with 21 CFR 1040.10 except for
deviations pursuant to Laser Notice No. 50,
dated June 24, 2007.
DANGER:
• VISIBLE AND INVISIBLE LASER
RADIATION WHEN OPEN. AVOID DIRECT
EXPOSURE TO BEAM. (FDA 21 CFR)
CAUTION:
• CLASS 3B VISIBLE AND INVISIBLE
LASER RADIATION WHEN OPEN. AVOID
EXPOSURE TO THE BEAM. (IEC 60825-1)
•
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS
OR PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE. DO NOT OPEN COVER AND
DO NOT REPAIR YOURSELF. REFER
SERVICING TO QUALIFIED PERSONNEL.
CLASS 1 LASER PRODUCT
KLASSE 1 · LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
PRODUCTO LASER CLASE 1
I NOTE I
~ If the Region number of a Blu-ray Disc/DVDs does
not correspond to the Region number of this player,
the player cannot play the disc.
Precautions
Important Safety Instructions
Read these operating instructions carefully
before using the unit. Follow all the safety
instructions listed below.
Keep these operating instructions handy for
future reference.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings.
Install in accordance with the
manufacturer's instructions.
8. Do not install near any heat sources
such as radiators, heat registers,
stoves, or other apparatus (including AV
receivers) that produce heat.
9. Do not defeat the safety purpose of
the polarized or grounding-type plug.
A polarized plug has two blades with
one wider than the other. A grounding
type
plug has two blades and a third
grounding prong. The wide blade or
the third prong are provided for your
safety. If the provided plug does not fit
into your outlet, consult an electrician for
replacement of the obsolete outlet.

1
0.
Protect
the
power
cord
from
being
walked
on
or pinched
particularly
at
plugs,
convenience
receptacles,
and
the
point
where
it
exits
the
apparatus.
11.
12.
13.
14.
Only
use
attachments/accessories
specified
by
the
manufacturer.
Use
only
with
the
cart,
Q9
stand,
tripod,
bracket,
or
table
specified
by
•
the
manufacturer,
or
sold
with
the
apparatus.
When
a
cart
is
used,
use
caution
when
moving
the
cart/apparatus combination
to
avoid
injury
from
tip-over.
Unplug
this
apparatus
during
lightning
storms
or
when
unused
for
long
periods
of
time.
Refer
all
servicing
to
qualified
service
personnel.
Servicing
is
required
when
the
apparatus
has
been
damaged
in
any
way,
such
as
when
the
power-supply
cord
or
plug
is
damaged,
liquid
has
been
spilled
or
objects
have
fallen
into
the
apparatus,
the
apparatus
has
been
exposed
to
rain
or
moisture,
does
not
operate
normally,
or
has
been
dropped.
Disc Storage
&
Management
•
Holding
Discs
-
Fingerprints
or
scratches
~
on
a disc
may
reduce
1
~
sound
and
picture
quality
or
cause
skipping
-
Avoid
touching
the
surface
of
a
disc
where
data
has
been
recorded.
Hold
the disc
by
the
edges
so
that
fingerprints
will
not
get
on
the
surface.
-
Do
not stick paper
or
tape
on
the
disc.
•
Cleaning
Discs
-
~~fi~~:g~r;~l~
~
cloth.
-
When
cleaning,
wipe
gently
from
the
inside
to
the
outside
of
the
disc.
•
Disc
Storage
•
Do
not
keep
in
direct
sunlight.
•
Keep
in
a
cool
ventilated
area.
•
Keep
in
a
clean
protection jacket
and
store
vertically.
Handling Cautions
•
Do
not
expose
this
apparatus
to
dripping
or
splashing.
Do
not
put
objects
filled
with
liquids,
such
as
vases
on
the
apparatus.
•
To
turn this apparatus
off
completely,
you
must
pull
the power
plug
out
of
the
wall
socket.
Consequently,
the
power
plug
must
be
easily
and
readily
accessible
at
all
times.
•
Do
not
plug
multiple
electric
devices
into
the
same
wall
socket.
Overloading
a socket
can
cause
it
to
overheat,
resulting
in
a
fire.
•
Maintenance
of
Cabinet.
-
Before
connecting
other
components
to
this
player,
be
sure
to
turn
them
off.
-
If
you
move
your
player
suddenly
from
a cold
place
to a
warm
place,
condensation
may
occur
on
the
operating parts
and
lens
and
cause
abnormal
disc
playback.
If
this
occurs,
unplug
the
player,
wait
for
two
hours,
and
then
connect
the
plug
to
the
power
outlet.
Then,
insert
the
disc,
and
try to
play
back
again.
•
If
the
product
makes
an
abnormal
noise
or
produces a
burning
smell
or
smoke,
turn
off
the
power switch
immediately
and
disconnect
the
power
plug
from
the
wall
outlet.
Then,
contact
the
nearest
customer
service
center
for
technical
assistance.
Do
not
use
the
product.
Using
the
product
as
it
is
may
cause
a
fire
or
an
electric
shock.
Copyright
©
2012
Samsung
Electronics
Co.,Ltd.
All
rights
reserved;
No
part
or
whole
of
this
user's
manual
may
be
reproduced
or
copied
without
the
prior written
permission
of
Samsung
Electronics
Co.,Ltd.
English
31
en
~
.....
'<
5"
-
0
3
a
a·
::::s

Contents
2
Warning
11
Connecting
to
a
TV
20
Insert
a
Disc
26
Compliance
and
Compatibility
Notice
2
Precautions
11
Connecting
to
an
Audio
System
20
Insert
a
USB
Device
26
Copy
Protection
2
Important
Safety
Instructions
11
Method
1
Connecting
to
an
HDMI
20
My
Contents
27
Network
Service
Disclaimer
3
Disc
Storage & Management
supported
AV
receiver
20
My
Devices
27
License
3
Handling
Cautions
11
Method
2
Connecting
to
an
AV
receiver
20
Controlling
Video
Playback
29
Additional
Information
3 Copyright
with
Dolby
Digital
or
DTS
decoder
20
Buttons
on
the
Remote
Control
used
for
29
Note
12
Wired
Network
Video
Playback
30
Resolution
accord
i
ng
to
the
contents
type
12
Wireless
Network
21
Using
the
Tools
Menu
31
Digital
Output
Selection
21
Controlling
Music
Playback
32
Troubleshooting
5
Disc
and
Format
Compatibility
21
Buttons
on
the
Remote
Control
used
for
33
Repairs
5
Disc
types
and
contents
your
player
can
Music
Playback
34
Specifications
play
13
The
Initial
Settings
Procedure
22
Repeat
an
Audio
CD
(CD-DA)
/
MP3
5
Disc
types
your
player
cannot
play
13
The
Home
Screen
22
Playlist
6
Region
Code
13
Accessing
the Settings
Screen
22
Playing
Photo
Contents
6
Logos
of
Discs
the player
can
play
13
Buttons
on
the
Remote
Control
Used
for
22
Using
the
Tools
Menu
7
Supported
Formats
the
Settings
Menu
8 Accessories
14
Settings
Menu
Functions
9
Front
Panel
17
Networks
and
the
Internet
9 Rear
Panel
17
Configuring
Your
Network
Connection
23
Using
Smart
Hub
10
Remote
Control
18
Upgrading
Software
23
Smart
Hub
at
a
Glance
10
Tour
of
the
Remote
Control
19
By
Internet
23
BD-LIVE™
19
By
USB
23
To
Download
the
AIIShare
Software
19
By
Disc
24
Playing
Content
Located
on
Your
PC
or
19
By
Downloaded
DLNA
Device
through
the
Blu-ray
Disc
19
Download
in
Standby
Mode
Player
24
Using
Disc
to
Digital
24
Registering
a
DVD
Movie
in
Disc
to
Digital
25
Playing
a
Registered
Disc
to
Digital
Movie
14
English

G
Disc
and
Format Compatibility
Disc
types
and
contents
your
player
can
play
...
Media
Disc
Type
Details
Blu-ray
Disc
BD-ROM
or
BD-REI-R
recorded
in
the
BO-RE
format.
DVD-VIDEO
VIDEO
DVD-RW
DVD-VIDEO,
recorded
DVD+RW/DVD-RW(V)/DVD-R/+R
that
have
DVD-R
been
recorded
and
finalized,
or
a
USB
storage
media
containing
MKV,
DVD+RW
MP4
contents.
DVD+R
CD-RW/-R,
Music
recorded
on
CD-RW/-R,
DVD-RW/-R,
BD-RE/-R
or
a
USB
MUSIC
DVD-RW/-R,
storage
media
containing
MP3
or
WMA
contents.
BD-RE/-R
CD-RW/-R,
Photos
recorded
on
CD-RW/-R,
DVD-RW/-R,
BD-RE/-R
or
a
USB
PHOTO
DVD-RW/-R,
storage
media
containing
JPEG
contents.
BD-RE/-R
I
NOTE
I
.,
The
player
may
not
play
certain
CD-RW/-R
and
DVD-R
because
of
the
disc
type
or
recording
conditions.
~
If
a
DVD-RW/-R
has
not
been
recorded
properly
in
DVD
video
format,
it
will
not
be
playable.
~
Your
player
will
not
play
content
that
has
been
recorded
on
a
DVD-R
at
a
bit-rate
that
exceeds
10
Mbps.
~
Your
player
will
not
play
content
that
has
been
recorded
on
a
BD-R
or
USB
device
at
a
bitrate
that
exceeds
25
Mbps.
~
Playback
may
not
work
for
some
types
of
discs,
or
when
you
use
specific
functions,
such
as
angle
change
and
aspect
ratio
adjustment.
Information
about
the
discs
is
written
in
detail
on
the
disc
box.
Please
refer
to
this
if
necessary.
~
When
you
play
a
BD-J
title,
loading
may
take
longer
than
a
normal
title
or
some
functions
may
perform
slowly.
Disc
types
your
player
cannot
play
•
HD
DVD
• DVD-ROM/PD/
MV,
etc
I
NOTE
I
•
DVD-RAM
•
Super
Audio
CD
(except
CD
layer)
•
DVD-RW(VR
mode)
• 3.9
GB
DVD-R
for
• CVD/CD-ROM/
Authoring.
CDV
/CD-G/CD-1/LD
(CO-Gs
play
audio
only,
not graphics.)
~
This
player
may
not
respond
to
all
operating
commands
because
some
Blu-ray
Discs,
DVDs,
and
COs
allow
specific
or
limited
operation
and
provide
only
certain
features
during
playback.
Please
note
that
this
is
not
a
defect
in
the
player.
~
Samsung
cannot
guarantee
that
this
player
will
play
every
disc
bearing
the
Blu-ray
Disc,
DVD
or
CD
logo
because
disc
formats
evolve,
and
problems
and
errors
may
occur
during
the
creation
of
Blu-ray
Disc,
DVD,
and
CD
software
and/or
the
manufacture
of
discs.
~
Please
contact
the
SAMSUNG
Customer
Care
Center
at
1-800-726-7864
if
you
have
questions
or
encounter
difficulty
when
playing
Blu-ray
Disc,
DVD,
or
CD
in
this
player.
Also,
refer
to
rest
of
this
user
manual
for
additional
information
on
playback
restrictions.
~
Some
commercial
discs
and
DVDs
purchased
outside
your
region
may
not
play
on
this
player.
English
51

Getting
Started
Region
Code
Both
players
and
discs
are
coded
by
region.
These
regional
codes
must
match
for
a disc
to
play.
If
the
codes do not
match,
the
disc
will
not
play.
The
Region
Number
for
this
player
is
displayed
on
the
rear
panel
of
the
player.
Disc
Type
Region
Code
Area
~
North
America,
Central
America,
South
America,
Korea,
Japan,
Taiwan,
Hong
Kong
and
South
East
Asia.
Blu-ray
Disc
~~~
Europe,
Greenland,
French
territories,
Middle
East,
Africa,
Australia
and
New
,~-:,i1
Zealand.
Gl
,
India,
China,
Russia,
Central
and
South
Asia.
(I
The
U.S.,
U.S.
territories
and
Canada
e
Europe,
Japan,
the
Middle
East,
Egypt,
South
Africa,
Greenland
e
Taiwan,
Korea,
the
Philippines,
Indonesia,
Hong
Kong
DVD-VIDEO
I)
Mexico,
South
America,
Central
America,
Australia,
New
Zealand,
Pacific
Islands,
Caribbean
G
Russia,
Eastern
Europe,
India,
most
of
Africa,
North
Korea,
Mongolia
e
China
16
English
Logos
of
Discs the player can play
Blu-ray
Disc
BD-LIVE
I
NTSC
I
NTSC
broadcast
system
in
U.S.A,
Canada,
Korea,
Japan

Supported Formats
Video File Support
*.avi
*.mkv
AVI
*.asf
*.wmv
MKV
*.mp4
ASF
*.3gp
MP4
*.vro
3GP
VRO
*.mpg
VOB
*.mpeg
PS
*.ts
TS
*.tp
*.trp
• Limitations
MPEG4 SP/ASP
H.264 BP/
1920x1 080
MP/HP
H.263
720x480
Window
Media Video v9
1920x1 080
MPEG2
MPEG1
352x288
6-30
24/25/30
24/25/3
20
25
10
25
20
Dolby Digital
LPCM
AAC
HE-AAC
WMA
MP3
DTS
- Even when a file is encoded by asupported codec listed above, the file might not be played
if its content is defective or corrupted.
-
Normal playback is not guaranteed if the file's container information is wrong or the file itself
is corrupted.
-
Files having higher bit or frame rates than standard may stutter when played back.
- The seek (skip) function is not available if the file's index table is damaged.
- When you playback a file remotely through a network connection, video playback may
stutter depending on the network speed.
- Some USB/Digital camera devices may not be compatible with the player.
• Video decoder
-Supports up to H.264 Level 4.1
- Does not support GMC 2 or higher
• Audio decoder
-Supports WMA 7, 8, 9 and STD
- Does not support WMA 9 PRO multi-channel or lossless audio if the number of channels is
more than 2.
- Does not support WMA sampling rate of 22050Hz mono.
• Comments
-MPEG4: Supports up to GMC 1-Warping Point.
-H.264 :Supports up to BP/MP/HP Level 4.1.
- H.263 : Supports up to Profile3, restricted up to SD resolution.
-WMV: Supports V9, VC1 SP/MP/AP L3.
- MPEG 1 : Does not support D-picture.
- MPEG2 :Supports up to Hight Profile High Level.
I NOTE I
~ Some MKV and MP4 format discs may not play, depending on their video resolution and frame rate.
Music File Support
File Extension Container Audio Codec
*.mp3
MP3
MP3
*.wma
WMA
WMA
* Sampling rates (in kHz) - 8, 11, 16, 22, 32, 44.1, 48
* Bitrates - All bitrates in the range 5kbps to 384kbps.
English 71

Getting Started
Notes on the USB connection
• Your player supports USB storage media,
MP3 players, digital cameras, and USB
card readers.
• Some USB/digital camera devices may not
be compatible with the player.
• Your player supports the FAT16, FAT32,
and NTFS files systems.
• Connect USB devices directly to the
player's USB port. Connecting through
a
USB cable may cause compatibility
problems.
• Inserting more than one memory device
into a multi-card reader may cause the
reader to operate improperly.
• The player does not support the PTP
protocol.
• Do not disconnect a USB device during a
"loading" process.
•
The bigger the image resolution, the longer
the image takes to display.
• This player cannot play MP3 files with DRM
(Digital Rights Management) downloaded
from commercial sites.
• Your player only supports video that is
under 30fps (frame rate).
• Your player only supports USB Mass
Storage Class (MSC) devices such as
thumb drives and USB HOD. (HUB is not
supported.)
•
Certain USB HOD Devices, multi-card
readers and thumb drives may not be
compatible with this player.
• If a USB device requires excessive power, it
may be limited by the circuit safety device.
18 English
• If playback from a USB HOD is unstable,
provide additional power by plugging the
HOD into a wall socket.
If the problem continues, contact the USB
HOD manufacturer.
• You must remove USB Storage devices
using the "Safely Remove USB" function
to prevent possible damage to the USB
memory.
Press the HOME button to move to the
home screen, press the YELLOW (C)
button, and then press the [5I button.
• SAMSUNG is not responsible for any data
file damage or data loss.
• Your player does not support NTSF
compressed files, sparse files, or encrypted
files.
- You can repair or format a USB device
on your Desktop PC. (MS-Windows OS
only)
AVCHD {Advanced Video Codec High
Definition)
• This player can play back AVCHD format
discs. These discs are normally recorded
and used in camcorders.
•
The AVCHD format is a high definition
digital video camera format.
•
The MPEG-4 AVC/H.264 format
compresses images with greater efficiency
than the conventional image compressing
format.
• Some AVCHD discs use the "x.v.Color"
format. This player can play back AVCHD
discs that use "x.v.Color" format.
• "x.v.Color" is atrademark of Sony Corporation.
• "AVCHD" and the AVCHD logo are trademarks of Matsushita Electronic Industrial Co., Ltd.
and Sony Corporation.
I NOTE I
~ Some AVCHD format discs may not play, depending on the recording conditions.
AVCHD format discs need to be finalized.
~ "x.v.Color" offers a wider color range than normal DVD camcorder discs.
Accessories
Check for the supplied accessories below.
Batteries for Remote Control (AAA Size)
(BN43-00004A)
Quick Guide
(AK68-02232A)
User Manual
(AK68-02227 A)
Remote Control
(AK59-0145A)

Front Panel
OPEN/CLOSE
BUTTON
SI\MSUNG 2
~
T
I
1
DISPLAY
REMOTE
CONTROL
SENSOR
DISC
TRAY
I
NOTE
I
-
PLAY/PAUSE
BUTTON
POWER
BU
TTON
mo
~
-
"'';"""
I
I
USB
HOS
T
~
To
upgrade
the
player's
software
through
the
USB
Host
jack,
you
must
use
a
USB
memory
stick.
~
When
the
player
displays
the
Blu
-
ray
Disc
menu
,
you
cannot
start
the
movie
by
pressing
the
Play
button
on
the
player
or
the
remote.
To
play
the
movie,
you
must
select
Play
Movie
or
Start
in
the
disc
menu,
and
then
press
the
(5I
button.
Rear Panel
----
----
LAN
HDMI
OUT
DIGITAL
AUDIO
OUT
English
91
D
c
"

Getting Started
Remote Control
Tour of the Remote Control
After setup, allows you to select the input f---J.:::::::::;:-----,
source on your TY.
(Thrs button only works with Samsung lVs.)
Turn the player on and off. f--J ~ ':/·J;::::.= ~ ~ ~ JI
Press numeric buttons to operate optrons
Use to enter the drsc menu.
Press to skrp backwards or fOIWards.
Press to use the Tools menu.
These buttons are used both for menus
on the player and also several Blu-ray Disc
funct1011s.
Press to use the Disc to Digrtal function.
Press to use Pandora.
1 10 Engl i sh
Turn the lV on and off.
(This button only works with Samsung lVs.)
lV volume adjustment.
(This button only works wrth Samsung lVs.)
Use to select menu items and change menu
values.
Press to exrt the menu
Press to use the full screen function.
Press to swrtch the Blu-ray Disc/DVD's
subtrtle language.
Installing batteries
I NOTE I
~ If the remote does not operate properly:
- Check the polarity +I- of the batteries.
- Check if the batteries are drained.
- Check if the remote sensor is blocked by obstac l es.
- Check if there is any fluorescent lighting nearby.
I CAUTION I
~ Dispose of batteries according to local environmental regulations. Do not put them in the household trash.

Connections
Connecting to a TV
Connect
an
HDMI
cable (not supplied) from the
HDMI
OUT
jack
on
the
back of the product to
the HDMIIN jack
on
your
TV.
-
Do
not connect the powercord to the
wall
outlet
until
you
have
made
all
the other
connections.
-
When
you
change
the connections, turn off
all
devices before
you
start.
I
NOTE
I
•
If
you
use
an
HDMI-to-DVI
cable
to
connect
to
your
display
device,
you
must
also
connect
the
Digital
Audio
Out
on
the
player
to
an
audio
system
to
hear
audio.
•
An
HDMI
cable
outputs
digital
video
and
audio,
so
you
don't
need
to
connect
an
audio
cable.
•
Depending
on
your
TV,
certain
HDMI
output
resolutions
may
not
work.
Please
refer
to
the
user
manual
of
your
TV.
•
When
you
connect
the
player
to
your
TV
using
the
HDMI
cable
or
to
a
new
TV,
and
then
turn
it
on
for
the
first
time,
the
player
automatically
sets
the
HDMI
output
resolution
to
the
highest
supported
by
the
TV.
• A
long
HDMI
cable
may
cause
screen
noise.
If
this
occurs,
set
HDMI
Deep
Color
to
Off
in
the
menu.
•
To
view
video
in
the
HDMI
720p,
1
080i,
or
1
080p
output
mode,
you
must
use
a
High
speed
(category
2)
HDMI
cable.
•
HDMI
outputs
only
a
pure
digital
signal
to
the
TV.
If
your
TV
does
not
support
HDCP
(High-bandwidth
Digital
Content
Protection),
ra1dom
noise
appears
on
the
screen.
Connecting
to
an Audio System
You
can connect the Blu-ray player to
an
the audio system
using
one
ofthe methods illustrated
below.
-
Do
not connect the power cord to the
wall
outlet
until
you
have
made
all
the other
connections.
-
When
you
change
the connections, turn off
all
devices
before
you
start.
Method 1
Connecting
to
an
HDMI
supported
AV
receiver
• Connect
an
HDMI
cable
(not
supplied)
from
the
HDMI
OUT
jack
on
the back ofthe product
to the
HDMI
IN
jack on
your
receiver.
• Best quality
(Recommended)
Method 2
Connecting
to
an
AV
receiver
with
Dolby
Digital
or
DTS
decoder
• Using a digital
Coaxial
cable
(not
supplied), connect the
Coaxial
Digital
Audio Out
jack
on
the
product tothe
Digital
Coaxial
in jack ofthe
receiver.
• Good quality
•
You
will
hear sound
only
through the front two speakers with
Digital
Output set to
PCM.
Method
1
Method
2
' I I
English
11
1
0
w
()
0
:::l
:::l
(!)
()
-6'
:::l
en

Connecting
to
a Network
Router
You
can
co
nn
ect
your
player
to
your
network
router
using
one
of
the
methods
illustrated
below.
To
use
the
AIIShare
network
functionality,
you
must
connect
your
PC
to
your
network
as
shown
in
the
illustrations.
The
connection
can
be
wired
or
wireless.
Wired
Network
r
A
Broadband
modem
rn
(with
integrated
router)
I
f~
+
(~'j
Broadband
•
C:ciJ
~-,00
Router
1
12
English
Broadband
modem
Broadband
service
I
NOTE
I
~
Internet
access
to
Samsung's
software
update
server
may
not
be
allowed,
depending
on
the
router
you
use
or
your
I
SP's
policy.
For
more
information,
contact
your
ISP
(Internet
Service
Provider).
~
DSL
users,
please
use
ar
outer
to
make
a
netwo
rk
connection.
Wireless
Network
..
--
.
,
~l)),
::L
l.
~
I
NOTE
I
Broadband
service
~
If
your
wireless
router
supports
DHCP,
this
player
can
use
a
DHCP
or
static
IP
address
to
connect
to
the
wireless
network.
~
Set
your
wireless
router
to
Infrastructure
mode.
Ad-
hoc
mode
is
not
supported.
~
The
player
supports
only
the
following
wireless
security
key
protocols:
-
WEP
(OPEN/SHARED),
WPA-PSK
(TK
I
P/AES),
WPA2-PSK
(TK
IP
/AES)
~
Select
a
channel
on
the
wireless
router
that
is
not
currently
being
used.
If
the
channel
set
for
the
wireless
router
is
currently
being
used
by
another
device
nearby,
it
will
result
in
interference
and
communication
failure.
~
If
you
select
the
Pure
High-thro
ughpu
t
(Greenfield)
802.11
n
mode
and
set
the
Encryption
type
on
your
router
to
WEP,
TKIP
or
TKIP-AES
(WPS2Mixed),
the
player
will
not
support
a
connection
in
compliance
with
new
Wi-Fi
certification
specifications.
~
Wireless
LAN
,
by
its
nature,
may
cause
interference
,
depending
on
the
operating
conditions
(router
performance,
distance,
obstacles,
interference
by
other
radio
devices,
etc).

Settings
The Initial Settings Procedure
• The Home menu will not appear if you do not
configure the initial settings.
• The OSD (On Screen Display} may change in this
player after you upgrade the software version.
• The access steps may differ depending on the
menu you selected.
The Initial Settings Procedure lets you set
the OSD and menu languages, configure the
connection to your home network, choose
the aspect ratio output (screen size and
format} that is correct for your TV.
For complete Initial Settings instructions, see
the Quick Start Guide.
I NOTE I
•
If you skip Network Setup during the Initial Settings
procedure, you can configure your network settings
later. See "Configuring Your Network Connection"
on pages 17 -18 for instructions.
• If you want to display the Initial Settings screen
again and make changes, select Settings > System
> Initial Settings in the Home screen or select the
Reset option. (See page 15)
• If you use an HDMI cable to connect the player to
an Anynet+(HDMI-CEC)-compliant Samsung TV and
1.) You have set the Anynet+(HDMI-CEC) feature to
On in both the TV and the player and 2.) You have
set the TV to a language supported by the player,
the player will select that language as the preferred
language automatically.
The HomeScreen
0
My Contents
My Devices : Lets you select a connected
device to play or access. The device can be
the player itself, a device directly connected
to the player, such as a USB thumb drive, or
a device connected via your network, such
as a shared drive on your PC.
Settings : Set various functions to suit your
personal preferences.
My Contents : Lets you select contents
located on connected devices by type to view
or play: You can select videos, photos, or
music.
Smart Hub : Starts Smart Hub . From Smart
Hub, you can access You Tube, games, and
other apps.
Disc to Digital : Upload DVD movies to your
personal Internet D isc to Digital repository .
Once movies are uploaded, they can be
streamed to other devices connected to the
Internet.
Displays the colored buttons on your remote
that you can press to access or perform
functions.
• Selecting an Option on the Home Screen
1. To select an option on the Home screen,
move the cursor using the .,.. ~ buttons
until it highlights the option of your
choice, and then press the lEI button.
I
NOTE I
•
If you leave the player in the stop mode for more than
5 minutes without using it, a screen saver will appear
on your TV. If the player is left in the screen saver
mode for more than 20 minutes, the power will
automatically turn off.
. Accessing the Settings Screen
1. Select Settings on the Home screen,
and then press the l5l button. The
Settings screen appears.
2. To access the Settings menus, sub-
menus, and options, please refer to the
remote control illustration and the table
to the right.
Buttonson the Remote Control
Used
for the Settings Menu
0
HOME Button : Press to move to the Home
screen .
RETURN Button : Return to the previous
menu.
l5l (Enter) I DIRECTION Buttons :
•
Press .& T .,.. ~ to move the cursor or
select an item.
• Press the l5l button to activate the
currently selected item or confirm a
setting.
EXIT Button : Press to exit the current menu.
Detailed Function Information
Each Settings function, menu item, and
individual option is explained in detail on-
screen. To view an explanation, use the
.& T .,.. ~ buttons to select the func tion, menu
item, or option. The explanation will usually
appear on the right side of the screen.
A short description of each Settings function
starts on the next page. Additional nformation
on some of the functions is also in the
Appendix of this manual.
Engli sh 131
-
0
~

Settings
Settings Menu Functions
Display
14
English
TV
Aspect
Smart
Hub
Screen
Size
BD
Wise
Resolution
Lets
you
adjust
the
output
of
the
player
to
the
screen
size
and
screen
format
of
your
TV.
Lets
you
select
the
optimal
size
for
the
Smart
Hub
Screen.
BD
Wise
is
Samsung's
latest
inter-connectivity
feature.
When
you
connect
a
Samsung
player
and
a
Sam
sung
TV
with
BD
Wise
to
each
other
via
HDMI,
and
BD
Wise
is
on
in
both
the
player
and
TV,
the
player
outputs
video
at
the
video
resolution
and
frame
rate
of
the
Blu-ray
Disc/
DVD.
Set
the
output
resolution
of
the
HOM
I
video
signal
to
Auto,
1
080p,
1
080i,
720p
or
480p.
The
number
indicates
the
number
of
lines
of
video
per
frame.
The
i
and
p
indicate
interlaced
and
progressive
scan,
respectively.
Generally,
the
higher
the
number
of
lines,
the
higher
the
picture
quality.
Lets
you
set
the
color
space
format
for
the
HOM
I
output
so
that
it
matches
the
capabilities
of
the
HDMI
Color
Format
connected
device
(TV,
monitor,
etc).
The
screen
goes
black
momentarily
after
you
have
selected
a
format.
Display
Movie
Frame
(24Fs)
HDMI
Deep
Color
Still
Mode
Progressive
Mode
If
the
player
is
connected
to
a
24Fs
compatible
TV,
setting
the
Movie
Frame
(24Fs)
feature
to
Auto
lets
the
player
adjust
its
HDMI
output
to
24
frames
per
second
automatically
for
improved
picture
quality.
•
You
can
enjoy the
Movie
Frame
(24Fs)
feature
only
on
a
TV
supporting this
frame
rate.
•
Movie
Frame
is
only
available
when
the
player
is
in
the
HOM
I 1
080i
or
1
080p output
resolution
modes.
Lets
you
set
the
product
to
output
HOM
I
video
with
Deep
Color.
Deep
Color
provides
more
accurate
color
reproduction
with
greater
color
depth.
Lets
you
set
the
type
of
picture
the
player
displays
when
you
pause
DVD
playback.
Lets
you
improve
picture
quality
when
viewing
DVDs.

Audio
Digital
Output
Lets
you
select
the
digital
audio
output
format
that
is
suitable
for
your
1V
or
AV
Receiver.
For
more
details,
see
the
digital
output
selection
table
on
page
31
.
Lets
you
choose
to
have
96Khz
PCM
signals
down
sampled
to
48Khz
before
they
are
PCM
Downsampling
outputted
to
an
amplifier.
Choose
On
if
your
amplifier
or
receiver
is
not
compatible
with
a
96Khz
signal.
Dynamic
Range
Control
Lets
you
apply
dynamic
range
control
to
Dolby
Digital,
Dolby
Digital
Plus,
and
Dolby
True
HD
audio.
./
Auto
:
Automatically
controls
the
dynamic
range
of
Dolby
TrueHD
audio,
based
on
information
in
the
Dolby
TrueHD
soundtrack.
Also
turns
dynamic
range
control
on
for
Dolby
Digital
and
Dolby
Digital
Plus.
./
Off:
Leaves
the
dynamic
range
uncompressed,
letting
you
hear
the
original
sound.
./
On
:Turns
dynamic
range
control
on
for
all
three
Dolby
formats.
Quieter
sounds
are
made
louder
and
the
volume
of
loud
sounds
is
reduced.
Lets
you
select
the
multi-channel
downmix
method
that
is
compatible
with
your
stereo
Downmixing
Mode
system.
You
can
choose
to
have
the
player
down
mix
to
normal
stereo
or
to
surround
compatible
stereo.
Network
System
Configure
the
network
connection
so
you
can
Network
Settings
enjoy
various
features
such
as
Internet
services
or
AIIShare,
and
perform
software
upgrades.
Network
Status
BD-Live
Internet
Connection
Initial
Settings
Quick
Start
Anynet
+(HOM
1-CEC}
BD
Data
Management
Time
Zone
Lets
you
check
the
current
network
and
Internet
status.
Set
to
allow
or
prohibit
an
Internet
connection
when
you
use
the
BD-LIVE
service.
You
can
set
the
language,
Network
Settings,
etc.
by
using
the
Initial
Settings
function.
Lets
you
set
the
player
to
turn
on
quickly
by
decreasing
the
boot
time.
I
NOTE
I
~
If
this
function
set
to
On
,
Standby
power
consumption
will
be
increased
.
Anynet
+
is
a
convenient
function
that
offers
linked
operations
with
other
Samsung
players
that
have
the
Anynet
+
feature
and
lets
you
control
those
products
with
one
Samsung
1V
remote.
To
operate
this
function,
you
must
connect
this
player
to
an
Anynet
+
Samsung
1V
using
an
HDMI
cable.
Lets
you
manage
the
downloaded
contents
you
accessed
through
a
Blu-ray
Disc
that
supports
the
BD-LIVE
service.
You
can
specify
the
time
zone
that
is
applicable
to
your
area.
Resets
all
settings
to
their
default
settings
except
Reset
for
the
network
and
Smart
Hub
settings.
The
default
security
PIN
is
0000.
English
15
1

Settings
Language
116
English
You
can
select
the
language
you
prefer
for
the
Home
menu,
disc
menu,
etc.
./
On-Screen
Menu
:
Select
the
language
for
the
on-screen
displays.
./
Disc
Menu
:Select
the
language
for
the
disc
menu
displays
.
./
Audio :
Select
the
language
for
the
disc
audio.
./
Subtitle :
Select
the
language
for
the
disc
subtitles.
I
NOTE
I
~
The
selected
language
will
only
appear
if
it
is
supported
on
the
disc.
The
default
PIN
is
0000.
Enter
the
default
PIN
to
access
the
security
function
if
you
haven't
created
your
own
password.
./
BD
Parental
Rating
:
Prevents
playback
of
Blu-ray
Discs
with
a
rating
equal
to
or
above
a
specific
age
rating
unless
you
enter
the
security
PIN.
./
DVD
Parental
Rating
:
Prevents
playback
of
DVDs
with
a
rating
above
a
specific
numerical
rating
unless
you
enter
the
security
PIN.
./
Change
Password
:
Change
the
4-digit
PIN
used
to
access
security
functions.
•
If
you
forgot your
PIN:
1.
Remove
any
disc
or
USB
storage
device.
2.
Press
and
hold
the
~~
button
on
the
front
panel
for
5
seconds
or
more.
All
settings
will
revert
to
the
factory
settings.
General
Network
Remote
Control
Software Upgrade
Contact
Samsung
The
Network
Remote
Control
function
lets
you
control
your
Blu-ray
Disc
player
from
a
remote
device
such
as
a
smart
phone
through
a
wireless
connection
to
your
local
area
network
.
1.
Select
On
in
the Network
Remote
Control
menu.
2.
Install
the
Samsung
network
remote
control
application to control
your
player
on
your
compatible portable
device.
3.
Make
sure
your
portable
device
and
your
player
are
connected to
the
same
wireless
router.
4.
Start
the
application
on
your
portable
device.
The
application
should
find
your
player
and
display
it
on
a
list.
5.
Select
the
player
.
6.
If
this
is
the
first
time
you
are
using
the
function,
it
will
ask
you
to
allow
or
deny
remote
control
of
the
player.
Select
Allow.
7.
Follow
the
instructions that
came
with
the
application to control
the
player.
For
more
information
about
the
Software
Upgrade
function,
see
"Upgrading
Software"
on
pages
18~
19.
Provides
contact
information
for
assistance
with
your
player.

Networks and the Internet
When you connect this player to a network,
you can use ne twork based applications and
functions such as Smart Hub and BD-LIVE,
and upgrade the player's software through
the network
connection. For more information
about
accessing and using Internet services,
see the Network Services chapter ofthis
manual on pages 23-25. Instructions for
configuring the network connection start
below.
Configuring Your Network
Connection
Before you begin, con tact your IS Pto find out
if your IP address is static or dynamic. If it is
dynamic, and you have a wired or wireless
network, we recommend using the Automatic
configuration procedures described below.
If you are connecting to a wired networ k,
connect the pl ayer to your router using a
LAN cable before you start the configuration
procedure.
If you are connecting to a wireless network,
disconnect
any wired network connection
before you begin.
To begin configuring your network connection,
follow these steps:
1. In the Home menu, select Settings, and
then press the lEI button.
2.
Select Network , and then press the lEI
button.
3. Select Network Settings, and then
press the lEI button.
The Network Settings screen appears .
--
--
r.-ct•ti-- .. UI~"-
IIftMtiiMCIMia_.
..... ~-----·~111.:
Wired Network
o Wired - Automatic
To setup, follow steps 1to 3 in "Configuring
Your Network Connection" on page 17.
1. Select Wired in the Network Settings
screen, and then press the lEI button.
The Network Status screen appears.
The player verifies the ne twork
connection and then connects to the
network .
o Wired - Manual
If you have astatic IP address or the
Automatic procedure does not work, you'll
need to set the Network Settings values
manually.
1. Select Wired in the Network Settings
sc r een, and then press the lEI button.
The Network Status screen appears.
T he pl ayer attempts to verify the network
connection and fails.
Se ~---
1-- @
...:-
·-
..... _
-
DOS-
~c:...a-':lt ........ TI'J .. ........
~~··lltllcndlrlll ........ .
&eel ·CIIId ................... ~ ..........
-
... liJiiiil
2. Select IP Settings on the bottom of the
screen, and press the lEI button.
The IP Settings screen appears.
3. Select the IP Mode field, and then set it
to Manual.
4. Use the number keypad on your remote
to enter the Network values . Use the
A. T • ~ buttons on the remote to move
from entry field to entry field.
5. When done, h ighlight OK , and then
press the 151 button. The Network
Status screen appears. The pl ayer
verifies the networkconnection and then
connects to
the network.
< Getting the IP Settings values >
You can view your N etwork Settings va l ues
on most Windows computers. To view the
Network
Settings values, follow these steps:
• WindowsXP
1. Right click the Network icon on the
bottom right of the Windows desktop.
2. In the pop-up menu, click Status.
3. On the dialog that appears, click the
Support
tab.
4. On the Support tab, click the Details
button.
The Network settings are displayed.
• Windows 7
1. Click the Network icon on the bottom
right of the Windows desktop.
2. In the pop-up menu, click Network and
Sharing Center.
3. On the dialog that appears, click the
Local Area Connection or Wireless
Network Connection depending on your
network connection.
4. On the Support tab, click the Details
button.
The Network settings are displayed.
I NOTE I
~ Depending on your Windows version, the
information may differ.
Wireless Network
You can setup a wireless network connection
in three ways:
- Wireless Automatic
- Wireless Manual
- WPS(PBC)
When you configure the wireless network
connection, any wireless network devices
currently connected through the player
or, if applicable, the player's current wired
connection, will be disconnected.
En gli sh 17 1
-
0
~
en
~
3'
<0
(/)

Settings
o Wireless (General) -Automatic
To setup, follow steps 1 to 3 in "Configuring
Your Network Connection" on page 17.
1. Select Wireless (General) in the
Network Settings screen, and then
press the (5I button.
The player searches for and then
displays a list of the available networks.
Settings
--~------~.:,.·
~
'-'
100001
~
IOOOOl
_.,
IOOOOl
IOOOOl
- IIIIJIII
2. Select the desired network, and then
press the (5I button.
The Security screen appears.
3. On the Security screen, enter your
network's Security Code or Pass
Phrase.
Enter numbers directly using the number
buttons on your remote control. Enter
letters by selecting aletter with an
arrow button, and then pressing the 151
button.
4. When done, select DONE at the bottom
of the screen, and then press the 151
button. The Network Status screen
appears. The player verifies the network
connection and then connects to the
network.
1 18 English
I NOTE I
~ You should be able to find the Security Code or
Pass Phrase on one of the set up screens you used
to set up your router or modem .
.J Wireless (General) -Manual
If you have a static IP address or the
Automatic procedure does not work, you'll
need to set the Network Settings values
manually.
After following Steps 1to 3 in "Configuring
Your Network Connection" on page 17.
1. Select Wireless (General) in the
Network Settings screen, and then
press the (5I button.
The Network Status screen appears.
The player attempts to verify the network
connection and fails.
Set:~--
.. r.l MOC- xm.nxuux
.. - ... '<I ·~ 0,0.0-0
KTWlNIA =..- :!!
s,oi ,.._ aou
Llllg __ , .. _., .. _
- ::,-:=::::.-::::.::...--- .. "s..'·
...
~~~~~~·.i
2. Select IP Settings on the bottom of the
screen, and then press the 151 button.
The IP Settings screen appears.
3. Select the IP Mode field, and then set it
to Manual.
- For the IP setting values, see "Getting
the IP Settings values" on page 17.
4. Use the number keypad on your remote
to enter the Network values. Use the
.A ..- <111 ..,.. buttons on the remote to move
from entry field to entry field.
5. When done, highlight OK , and then
press the 151 button.
The Security screen appears.
6. On the Security screen, enter your
network's Security Code or Pass
Phrase.
Enter numbers directly using the number
buttons on your remote control. Enter
letters by selecting a letter with an
arrow button, and then pressing the (5I
button.
7. When done, select DONE at the bottom
of the screen, and then press the 151
button. The Network Status screen
appears. The player verifies the network
connection and then connects to the
network.
o WPS(PBC)
One of the easiest ways to set up the wireless
network connection is using the WPS(PBC)
function. If your wireless router has a
WPS(PBC) button, follow these steps:
1. Open the Home screen.
2. Press the BLUE (D) button on the
remote control.
3. Press the WPS(PBC) button on your
router within two minutes. Your player
automatically acquires all the network
settings values it needs and connects
to your network. The Network Status
screen appears. The player connects
to the network after the network
connection is verified.
Upgrading Software
The Software Upgrade menu allows you to
upgrade the player's software for performance
improvements or additional services.
• Never turn the player off or back on manually
during the update process.
1. In the Home screen, select Settings ,
and then press the 151 button.
2. Select Support , and then press the (5I
button.
3. Select Software Upgrade , and then
press the 151 button.
4. Select one of the following methods:
• By Internet
• By USB
• By Disc
• By Downoaded
• Download in Standby Mode
5. Press the 151 button.
I NOTE I
~ The upgrade is complete when the player turns off,
and then turns on again by itself.
~ Samsung Electronics takes no legal responsibility
for player malfunction caused by an unstable
Internet connection or consumer negligence during
a software upgrade.
~ If you want to cancel the upgrade while the upgrade
software is downloading, press the 151 button.

By
Internet
Your
player must
be
connected
to
the
Internet
to
use
the
By
Internet
function.
1.
Select
By
Internet,
and
then
press
the
[5I
button.
The
Connecting to
Server
message
appears.
2.
If
there
is
a download
available,
the
Download pop-up
appears
with
a
progress bar
and
the
download
starts.
3.
When
the
download
is
complete,
the
Upgrade
Query
window
appears
with
three choices: Upgrade
Now,
Upgrade
Later,
or
Don't
Upgrade.
4.
If
you
select Upgrade
Now,
the
player
upgrades
the
software,
turns
off
,
and
then
turns
on
automatically.
5.
If
you
do not
make
a
selection
in
one
minute
or
select Upgrade
Later,
the
player
stores
the
new
upgrade
software.
You
can
upgrade
the
software
later
using
the
By
Downloaded
function.
6.
If
you
select Don't
Upgrade,
the
player
cancels
the
upgrade.
By
USB
1.
Visit
www.samsung.com.
2.
Click
SUPPORT
on
the
top
right
of
the
page.
3.
Enter
the
product's
model
number
into
the
search
field,
and
then
click
Find
Product.
4.
Click
Get downloads
in
the
center
of
the
page
below
the
Downloads
header.
5.
Click
Firmware
in
the
center
of
the
page.
6.
Click
the
ZIP
icon
in
the
File
column
on
the
right
side
of
the
page.
7.
Click
OK
in
the pop-up that
appears
to
download
and
save
the
firmware
file
to
your
PC.
8.
Unzip
the
zip
archive
to
your
computer.
You
should
have
a
single
folder
with
the
same
name
as
the
zip
file.
9.
Copy
the
folder to a
USB
flash
drive.
1
0.
Make
sure
no
disc
is
inserted
in
the
player,
and
then
insert
the
USB
flash
drive into
the
USB
port
of
the
player.
11.
In
the player's
menu,
go
to Settings>
Support > Software
Upgrade.
12.
Select
By
USB.
I
NOTE
I
~
There
should
be
no
disc
in
the
player
when
you
upgrade
the
software
using
the
USB
Host
jack.
~
When
the
software
upgrade
is
done,
check
the
software
details
in
the
software
Upgrade
menu.
~
Do
not
turn
off
the
player
during
the
software
upgrade.
It
may
cause
the
player
to
malfunction.
~
Software
upgrades
using
the
USB
Host
jack
must
be
performed
with
a
USB
flash
memory
stick
only.
By
Disc
1.
Follow
Steps
1through 7
in
By
USB.
2.
Unzip
the
zip
archive
to
your
computer.
You
should
have
a
single
folder
with
the
same
name
as
the
zip
file.
3.
Write the folder onto a
disc.
We
recommend a
CD-R
or
DVD-R.
4.
Finalize
the
disc
before
you
remove
it
from
your
computer.
5.
Insert
the disc
into
the
player.
6.
In
the
player
's
menu,
go
to
Settings>
Support > Software upgrade.
7.
Select
By
Disc.
I
NOTE
I
~
When
the
system
upgrade
is
done,
check
the
software
details
in
the
software
Upgrade
menu.
~
Do
not
turn
off
the
player
during
the
Software
Upgrade
.
It
may
cause
the
player
malfunction.
By
Downloaded
The
By
Downloaded option
lets
you
upgrade
using
a
file
the
player
downloaded
earlier
but
you
decided not to
install
immediately
or
a
file
downloaded
by
the
player
in
Standby
Mode.
1.
If
upgrade software
has
been
downloaded,
you
will
see
the
software
version
number to the
right
of
By
Downloaded.
2.
Select
By
Downloaded,
and
then
press
the
[5I
button.
3.
The
player
displays a
message
asking
if
you
want to upgrade.
Select
Yes.
The
player
begins
the
upgrade.
4.
When
the
update
is
complete,
the
player
turns
off
automatically,
and
then
turns
on.
I
NOTE
I
~
When
the
system
upgrade
is
done
,
check
the
software
details
in
the
software
Upgrade
menu.
~
Do
not
turn
off
the
player
during
the
software
Upgrade.
It
may
cause
the
player
to
malfunction.
Download
in
Standby
Mode
You
can
set
the Download
in
Standby
Mode
function
so
that the
player
downloads
new
upgrade software
when
it
is
in
Standby
Mode.
In
Standby
Mode,
the
player
is
off,
but
its
Internet
connection
is
active.
This
allows
the
player
to download
upgrade
software
automatically,
when
you
are
not
using
it
.
1.
Press
the • -. buttons
to
select
Download
in
Standby Mode,
and
then
press
the
[5I
button.
2.
Select
On
or
Off.
If
you select
On,
the
player
will
automatically download
new
upgrade
software
when
it
is
in
Standby
Mode
with the power
off.
If
it
downloads
new
upgrade
software,
the
player
wi
ll
ask
you
if
you want to
install
it
when
you
turn
the
player
on.
I
NOTE
I
~
To
use
Standby
Mode
Upgrade
function,
your
player
must
be
connected
to
the
Internet.
English
19
1

Medta
Play
Your
Blu-ray
player
can
play
Disc
and
USB
contents
and
the
contents
located
on
your
PC
using
the
AIIShare
function.
For
more
information
about
AIIShare,
refer
to
pages
23-24.
Insert a Disc
1.
Press
the
0
button to
open
the disc
tray.
2.
3.
4.
Push
a disc
gently
into the disc tray with
the
disc's
label
facing
up.
Press
the 0 button to close the disc
tray.
Playback
starts
automatically.
If
playback
does
not start
automatically,
select
the
My
Contents or
My
Devices
option
on
the
Main
screen,
and
then
press
the
[5I
button.
Insert
a USB Device
You
can
play
multimedia
files
located
on
a
USB
storage
device.
1.
With
the
player
off,
connect the
USB
storage
device
to the
USB
port
on
the
front
panel
of
the
player.
2.
Turn
on
the
player.
When
the
Main
screen
appears,
select
My
Devices
>
USB,
and
then
press
the
[5I
button.
120
English
3.
4.
My
Dev1ces
..,
__
...
•
Select
Videos,
Photos,
or
Music,
and
then
press
the
[5I
button
The
contents of
the
USB
device
is
displayed.
Depending
on
how
the contents
is
arranged,
you
will
see
either
folders,
individual
files,
or
both.
Using
the
~
'f'
-<11
.,.
buttons
on
your
remote,
select
the
desired
contents.
To
open
a
folder,
select
it,
and
then
press
the
[5I
button.
To
play
a
file,
select
it,
and
then
press
the
[5I
button.
5.
Press
the RETURN button to
exit
a
folder or to
return
to the
Main
screen.
I
NOTE
I
•
You
must
remove
the
USB
storage
device
safely
(by
performing
the
"
Safely
Remove
USB
"
function)
in
order
to
prevent
possible
damage
to
the
USB
memory.
Press
the
HOME
button
to
move
to
the
Home
menu,
select
the
YELLOW
(C)
button,
and
then
press
the
l5l
button.
•
If
you
insert
a
disc
when
playing
a
USB
storage
device,
the
device
mode
changes
to
"DVD
or
CD"
automatically.
•
The
screen
will
only
display
files
of
the
Content
Type
you
selected.
For
example,
if
you
select
Music,
you
will
only
be
able
to
see
music
files.
If
you
open
folders
labeled
Photos
or
Videos,
no
files
will
be
displayed.
To
view
other
types
of
files,
select
a
different
Content
Type.
My
Contents
HOME
•
My
Contents
• Vi
deos
,
Photos
or
Mus
ic
The
My Contents
option
lists
only
files
ofthe
type
you
select.
For
example,
if
you
select
Music,
the
player
will
list
only
music
files
on
the
screen.
Note
that
the
player
will
display
all
folders.
You
must
open
the
folders
to
display
the music
files.
My
Contents
My
Devices
HOME
..
My
Devices
•
USB
,
Disc
or
AIIShare
The
My
Devices
option
lists
only
those
folders
and
files
on
the
kind
of
device
you
select.
For
example,
if
you
select
USB,
the
player
will
list
only
those
folders
or
files
on
an
attached
USB
device
on
the
screen.
My
Devices
Controlling
Video
Playback
You
can
control the
playback
of
video
content
located
on
a
DVD,
CD
or
USB
storage
device.
Depending
on
the
disc,
some
ofthe functions
described
in
this
manual
may
not be
available.
Buttons on the Remote Control
used
for
Video Playback
0
Playback related buttons
The
player
does
not
play
sound
in
Search,
Slow or
Step
mode.
•
To
return
to
normal
speed
playback,
press
the
a
button.
a
button
Starts
playback.
D
button
Stops
playback.