Samsung SC-DC171 Quick start guide

Back-End Soft Upgrade Method
1. Run nero program.
Click on <Make Data DVD>
on nero.
2. Click on <Add> button.
3. Add the B-End program.
(File name : 0705_cne.Bin)
4. Change the file name with
‘RAINBOW.UPD’.
(The file name should be
changed into Capital letter.)
Click on <Next> button.
5. Click on <Bunning> button.
1/2

1. Power On (Disc CAM E/E)
※Pls connect AC adapter, When
you update. If you power off
during update, Set will be out of
order.
2. After eject, insert a Software
Update disc and close the
housing cover.
3. <Do you really want to
upgrade firmware?>
message will appear.
4. Move the [Joystick(5Way key)]
left or right to select <OK>,
then Press the [Joystick].
5. And then, yellow bar shows
the progress.
1/2
Back-End Soft Upgrade Method

6. When yellow bar progress until
end point, DVD Cam power
will be off and than on
automatically. Screen is blue.
7. Power off (by removing power
adapter) and then power on.
The message will appear.
Move the [Joystick] left or
right to select <Cancel>,
then press the [Joystick].
8. When <no disc!> appear,
eject and remove a disc.
9. In Cam E/E press the [LCD
ENHANCER]and [Joystick]
left side at the same time
more than 3 seconds.
10. Check the program version
which will display on LCD screen.
2/2