Samsung CW-29A208T User manual

COLOUR
TELEVISION
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
Register your product at www.samsung.com/global/register
ON-SCREEN MENUS
PICTURE IN PICTURE (OPTION)
TELETEXT
AA68-03336A-02Eng 12/23/04 10:53 AM Page 1

AA68-03336B-00Eng 12/7/04 2:31 PM Page 2

Contents
◆CONNECTING AND PREPARING YOUR TELEVISION
■View of Your Television (depending on the model) ....................................... 5
■Infrared Remote Control ................................................................................ 6
■Inserting the Batteries in the Remote Control................................................ 8
■Connecting to an Aerial or Cable Television Network ................................... 8
■Switching Your Television On and Off........................................................... 9
■Placing Your Television in Standby Mode..................................................... 9
■Becoming Familiar with the Remote Control ................................................. 10
■Plug & Play Feature....................................................................................... 11
■Viewing the Demonstration............................................................................ 12
■Choosing Your Language.............................................................................. 12
◆SETTING THE CHANNELS
■Storing Channels Automatically..................................................................... 13
■Sorting the Stored Channels ......................................................................... 14
■Storing Channels Manually............................................................................ 15
■Skipping Unwanted Channels ....................................................................... 17
■Assigning Names to Channels ...................................................................... 18
■Fine Tuning Channel Reception.................................................................... 19
◆USING YOUR TELEVISION
■Using the LNA (Low Noise Amplifier) feature (depending on the model) ...... 20
■Changing the Picture Standard ..................................................................... 21
■Adjusting the Picture Settings........................................................................ 22
■Selecting the Colour Tone............................................................................. 23
■Selecting the Picture Size (depending on the model)................................... 24
■Selecting the Digital NR................................................................................. 24
■Using the Tilt Control Feature........................................................................ 25
■Setting the Blue Screen................................................................................. 25
■Freezing the Current Picture ......................................................................... 26
■Changing the Sound Standard ...................................................................... 26
■Adjusting the Sound Settings ........................................................................ 27
■Extra Sound Settings (depending on the model)........................................... 28
■Selecting the Sound Mode (depending on the model) .................................. 29
■Selecting the Melody ..................................................................................... 30
■Setting and Displaying the Current Time....................................................... 31
English-3
AA68-03336B-00Eng 12/7/04 2:31 PM Page 3

Contents (continued)
◆USING YOUR TELEVISION (continued)
■Setting the Sleep Timer ................................................................................. 32
■Switching the Television On and Off Automatically ....................................... 33
■Setting the Preferred Volume Level/Channel ................................................ 34
■Viewing an External Signal Source/Edit Name (depending on the model).... 35
■Viewing the Picture In Picture (PIP) (depending on the model) .................... 36
◆USING THE TELETEXT FEATURE
■Teletext Feature ............................................................................................ 39
■Displaying the Teletext Information ............................................................... 39
■Selecting a Page by Number......................................................................... 40
■Using FLOF to Select a Page........................................................................ 41
■Storing Teletext Pages .................................................................................. 41
◆ADDITIONAL INFORMATION ON CONNECTIONS
■Connecting to the External Input/Outputs (depending on the model)............ 42
■Connecting to the Audio Output .................................................................... 42
■Connecting to the RCA Input (depending on the model)............................... 43
■Connecting to the S-Video Input (depending on the model).......................... 43
■Viewing Pictures From External Sources ...................................................... 44
◆RECOMMENDATIONS FOR USE
■Automatic Degaussing to Remove Colour Patches....................................... 45
■Troubleshooting: Before Contacting Service Personnel................................ 45
☛➢
Press Important Note
Symbols
English-4
AA68-03336B-00Eng 12/7/04 2:31 PM Page 4

View of Your Television (depending on the model)
Control Panels
Connection Panels
1) Power On/Off
2) Standby Indicator
3) Remote Control Sensor
4) Channel Selection
5) Volume Adjustment
6) Menu Display
7) Input source selection
➢The actual configuration on your TV may be different, depending on
your model.
Audio Input (R, L)
Video Input
S-Video Input
Side of the TV
SCART Audio/
Video Input/Output Monitor Audio Output
75ΩCoaxial Connector for Aerial/Cable Network
Rear of the TV
4 5 6 2
1
3
4 5 67 3
1
2
4 5 63
1
2
62
1
4 5 3
7
4
5
6
7
3
1
2
English-5
AA68-03336B-00Eng 12/7/04 2:31 PM Page 5

Infrared Remote Control
English-6
➢The performance of the remote control may be affected by bright light.
TELEVISION STAND-BY
DIRECT CHANNEL SELECTION
VOLUME INCREASE
TEMPORARY SOUND SWITCH-OFF
MENU DISPLAY
MOVE TO THE REQUIRED
MENU OPTION/
ADJUST AN OPTION VALUE
RESPECTIVELY
TURBO SOUND
SOUND MODE SELECTION
EXTERNAL INPUT SELECTION
AUTOMATIC SWITCH-OFF
PICTURE SIZE
EXIT FROM ANY DISPLAY
PREVIOUS CHANNEL
CHANGE CONFIRMATION
INFORMATION DISPLAY
PICTURE EFFECT SELECTION
ONE/TWO-DIGIT
CHANNEL SELECTION SWITCH REPEATEDLY
BETWEEN THE LAST TWO
CHANNELS DISPLAYED
SOUND EFFECT SELECTION
VOLUME DECREASE
NEXT CHANNEL
SOUND MENU DISPLAY
DNIe ON/OFF/DEMO
(depending on the model)
STILL PICTURE
AA68-03336B-00Eng 12/7/04 2:31 PM Page 6

Infrared Remote Control (continued)
FASTEXT TOPIC SELECTION
P
P
PROGRAMME
SELECTION BY NAME
SUB PICTURE(PIP)
LOCATION SELECTION
(depending on the model)
SUB PICTURE(PIP)
SOURCE SELECTION
(depending on the model)
SUB PICTURE(PIP)
NEXT CHANNEL
(depending on the model)
PIP ON/OFF
(depending on the model)
TELETEXT SUB-PAGE
TELETEXT MODE SELECTION
(LIST/FLOF)
TELETEXT STORE
TELETEXT SIZE SELECTION
SUB PICTURE(PIP) SIZE SELECTION
(depending on the model)
SUB PICTURE(PIP) PREVIOUS
CHANNEL (depending on the model)
INTERCHANGE THE MAIN AND SUB
PICTURE (PIP) (depending on the model)
W.LINK FUNCTIONS
(depending on the model)
TELETEXT PREVIOUS PAGE
TELETEXT REVEAL
TELETEXT PAGE HOLD
TELETEXT NEXT PAGE
TELETEXT DISPLAY/
MIX BOTH TELETEXT INFORMATION
AND THE NORMAL BROADCAST
English-7
AA68-03336B-00Eng 12/7/04 2:31 PM Page 7

You must insert or replace the batteries in the remote control when
you:
◆Purchase the television
◆Find that the remote control is no longer operating
correctly
1Remove the cover on the rear of the remote control by pressing
the symbol ( ) downwards and then pulling firmly to remove it.
2Insert two R03, UM4, “AAA” 1.5V or equivalent batteries taking
care to respect the polarities:
◆ - on the battery against - on the remote control
◆ + on the battery against + on the remote control
3Replace the cover by aligning it with the base of the remote
control and pressing it back into place.
Inserting the Batteries in the Remote Control
To view television channels correctly, a signal must be received by
the set from one of the following sources:
◆An outdoor aerial
◆A cable television network
◆A satellite network
1In the first three cases, connect the aerial or network input cable to
the 75Ωcoaxial socket on the rear of the television.
2If you are using an indoor aerial, you may need to turn it when
tuning your television until you obtain a picture that is both sharp
and clear.
For further details, refer to:
◆“Storing Channels Automatically ”on page 13
◆“Storing Channels Manually”on page 15
Connecting to an Aerial or Cable Television Network
Rear of the TV
Cable Television
Network
or
English-8
AA68-03336B-00Eng 12/7/04 2:31 PM Page 8

The mains lead is attached to the rear of your television.
1Plug the mains lead into an appropriate socket.
➢
The main voltage is indicated on the rear of the television
and the frequency is 50 or 60Hz.
2Press the “”button (On/Off) on the front of the television.
Result: The Standby indicator on the front of the television
lights up.
3Press the POWER ( ) button on the remote control to switch the
television on.
Result: The programme that you were watching last is re-
selected automatically.
➢If you have not yet stored any channels, No clear picture
appears. Refer to “Storing Channels Automatically”on page
13 or “Storing Channels Manually”on page 15.
4To switch your television off, press the “”button (On/Off) again.
Placing Your Television in Standby Mode
Your television can be placed in Standby mode, in order to reduce:
◆Power consumption
◆Wear of the cathode ray tube
The Standby mode can be useful when you wish to interrupt
viewing temporarily (during a meal, for example).
1Press the POWER ( ) button on the remote control.
Result: The screen is turned off and the Standby indicator on
the front of the television lights up in red.
2To switch the television back on, simply press the POWER ()
button again.
➢You can also switch on by pressing the Por button.
☛Do not leave your television in Standby mode for long
periods of time (when you are away on holiday, for
example). Turn your television off by pressing the “ ”
button (On/Off) on the front of the television. It is best to
unplug the set from the mains and aerial.
Switching Your Television On and Off
English-9
AA68-03336B-00Eng 12/7/04 2:31 PM Page 9

Becoming Familiar with the Remote Control
The remote control is used mainly to:
◆Change channels and adjust the volume
◆Set up the television using the on-screen menu system
The following table presents the most frequently used buttons and
their functions.
Button Viewing Function Menu Function
Used to display the next -
stored channel.
Used to display the previous
-
stored channel.
to Used to display the corresponding channels.
-/-- Used to select a channel numbered ten or over.
Press this button, and the “
-- ”symbol is displayed.
Enter the two-digit channel number.
PRE-CH Press the PRE-CH button. The TV will switch to the last
channel viewed.
To quickly switch between two channels that are far apart,
tune to one channel, then use the number button to select
second channel. Then, use the PRE-CH button to quickly
alternate between them.
Used to increase the -
volume.
Used to decrease the
-
volume.
MUTE Used to switch the sound off temporarily.
➢To turn the sound back on, press this button again, or
press the or button.
MENU Used to display the Used to return to the previous
on-screen menu system. menu or normal viewing.
- Used to:
◆Display a submenu
containing selections for
the current menu option
◆Increase/decrease a
menu option value
- Used to confirm your choice.
EXIT - Used to exit from the menu
system and return to normal
viewing directly.
TV Used to switch the
television on when it is
in Standby mode.
English-10
AA68-03336B-00Eng 12/7/04 2:31 PM Page 10

When the television is initially powered on, three basic customer
settings proceed automatically and subsequently: setting the
language, channel and clock.
1If the television is in Standby mode, press the POWER ( ) button
on the remote control.
Result: The message Plug & Play is displayed. It flickers for
a little while and then Language menu is automatically
displayed.
2Select the appropriate language by pressing the ▼or ▲ button.
Press the MENU
()
button to enter the language.
Result: The message Check antenna input. is displayed.
➢If any language is not selected on the Language menu, the
Language menu will disappear about 30 seconds later.
3Make sure that the antenna is connected to the TV.
Press the œor √button.
Result: The Auto Store menu is displayed with Country is
selected.
4Select your country by pressing the œ or √button. To search the
channels, select Search by pressing the ▼or ▲ button, and then
press the œ or √button. Press the MENU
()
button to stop the
search.
Result: The Time menu is displayed with Clock is selected.
➢Refer to “Storing Channels Automatically”on page 13.
5Press the œ or √button to move to the hour or minute. Set the
hour or minute by pressing the ▼or ▲ button.
➢Refer to “Setting and Displaying the Current Time”on page
31.
6When you have finished, press the MENU
()
button.
Result: The message Enjoy your watching. is displayed,
and then the channel which has been stored will be
activated.
7If you want to reset this feature...
1Press the MENU
()
button.
2Press the ▼or ▲ button to select Setup, and then press the
ENTER ( ) button.
Result: The Plug & Play is selected.
3Press the ENTER ( ) button again.
Result: This feature starts with the message Plug & Play
is displayed.
Plug & Play Feature
Plug & Play
Enjoy your watching.
Move Enter Return
Setup
Plug & Play
√√
Language : English
Time
√√
Blue Screen : Off
Melody : On
Demonstration
√√
TV
Move
œœ √√
Adjust Skip
Auto Store
Country
œœ
UK
√√
Search : -/+
TV
Move
œœ √√
Adjust Skip
Time
Clock -- : --
Sleep Timer : Off
On Timer -- : -- Off
Off Timer -- : -- Off
On Timer Volume : 10
On Timer Channel : 1
TV
Check antenna input.
œœ √√
Move Skip
English-11
Move Skip
English
Deutsch
Français
Nederland
Español
Italiano
Svenska
Português
∂ÏÏËÓÈο
âe‰tina
Srpski
Hrvatski
Român™
Magyar
Polski
êÛÒÒÍËÈ
Å˙΄‡ÒÍË
Türkçe
TV Language
AA68-03336B-00Eng 12/7/04 2:31 PM Page 11

To become familiar with the various menus provided by your
television, you can view the inbuilt demonstration.
1Press the MENU
()
button.
Result: The main menu is displayed.
2Press the ▼or ▲ button to select Setup.
Result: The options available in the Setup group are
displayed.
3Press the ENTER ( ) button.
4Press the ▼or ▲ button to select Demonstration.
5Press the ENTER ( ) button.
Result: Each of the menu options is displayed in turn.
➢When you wish to exit from the demonstration, press the
EXIT ( ) button on the remote control.
When you start using your television for the first time, you must
select the language which will be used for displaying menus and
indications.
1Press the MENU
()
button.
Result: The main menu is displayed.
2Press the ▼or ▲ button to select Setup.
Result: The options available in the Setup group are
displayed.
3Press the ENTER ( ) button.
4Press the ▼or ▲ button to select Language.
5Press the ENTER ( ) button.
Result: The options available in the Language group are
displayed.
6Select the appropriate language by pressing the ▼or ▲button
repeatedly.
7When you have finished, press the EXIT ( ) button to exit.
Viewing the Demonstration
Choosing Your Language
Move Enter Return
Setup
Plug & Play
√√
Language : English
Time
√√
Blue Screen : Off
Melody : On
Demonstration
√√
TV
Move
œœ √√
Adjust Return
Setup
Plug & Play
√√
Language
œœ
English
√√
Time
√√
Blue Screen : Off
Melody : On
Demonstration
√√
TV
English-12
Move Return
English
Deutsch
Français
Nederland
Español
Italiano
Svenska
Português
∂ÏÏËÓÈο
âe‰tina
Srpski
Hrvatski
Român™
Magyar
Polski
êÛÒÒÍËÈ
Å˙΄‡ÒÍË
Türkçe
TV Language
AA68-03336B-00Eng 12/7/04 2:31 PM Page 12

You can scan for the frequency ranges available to you (and
availability depends on your country). Automatically allocated
programme numbers may not correspond to actual or desired
programme numbers. However you can sort numbers manually and
clear any channels you do not wish to watch.
1Press the MENU
()
button.
Result: The main menu is displayed.
2Press the ▼or ▲ button to select Channel.
Result: The options available in the Channel group are
displayed.
3Press the ENTER ( ) button.
Result: The Auto Store is selected.
4Press the ENTER ( ) button again.
Result: The options available in the Auto Store group are
displayed with Country is selected.
5Select your country by pressing the œ or √button. The areas are
displayed in the following order: Others
- Belgie -
Deutschland - España - France - Italia - Nederland -
Schweiz - Sverige - UK - Eastern Europe.
6Press the ▼or ▲ button to select Search.
7Press the œ or √button to start the search.
Result: The horizontal bar is displayed, and then channels are
stored in an order which reflects their positions in the
frequency range. Finally, the search will end
automatically.
➢To stop the search before it has finished, press the MENU
()
button.
8When searching and storing are complete, the Sort menu is
displayed.
◆ To sort the stored channels into the desired numerical order,
go to Step 6of the “Sorting the Stored Channels”procedure
on page 14.
◆ To exit from the channel store function without sorting the
channels, press the MENU
()
button repeatedly until the
menus disappear.
9When the channels have been stored, you can:
◆ Sort them in the order required (refer to page 14)
◆ Skip Unwanted Channels (refer to page 17)
◆ Assign a name to the stored channels (refer to page 18)
◆ Fine tune channel reception if necessary (refer to page 19)
◆ Activate the Digital Noise Reduction feature (refer to page 24)
Storing Channels Automatically
Return
Move Enter Return
Channel
Auto Store
√√
Manual Store
√√
Add/Delete
√√
Sort
√√
Name
√√
††
More
TV
Move
œœ √√
Adjust Return
Auto Store
Country
œœ
UK
√√
Search : -/+
TV
Move
œœ √√
Search Return
Auto Store
Country : UK
Search
œœ
-/+
√√
TV
Move
œœ √√
Adjust Return
Sort
From
œœ
P 1 -----
√√
To : P-- -----
Store : ?
TV
P 1 C-- ----
106 MHz 7 %
English-13
AA68-03336B-00Eng 12/7/04 2:31 PM Page 13

This operation allows you to change the programme numbers of
stored channels. This operation may be necessary after using auto
store. You can delete the channels you do not want to keep.
1Press the MENU
()
button.
Result: The main menu is displayed.
2Press the ▼or ▲ button to select Channel.
Result: The options available in the Channel group are
displayed.
3Press the ENTER ( ) button.
4Press the ▼or ▲ button to select Sort.
5Press the ENTER ( ) button.
Result: The options available in the Sort group are displayed
with From is selected.
6Select the channel number that you wish to change by pressing
the œ or √button repeatedly.
7Press the ▼or ▲button to select To. Select the new channel
number which you wish to identify by pressing the œ or √button
repeatedly.
➢You can also select the channel number directly by pressing
the numeric buttons (0~9).
8Press the ▼or ▲ button to select Store. Select OK to confirm the
exchange of channel numbers by pressing the œ or √button.
Result:
The selected channel is exchanged with the one
previously stored to the chosen number.
9For all the channels to move to the required channel numbers,
repeat steps 6to 8after selecting the From by pressing the ▼or ▲
button.
10 When you have finished, press the EXIT ( ) button to exit.
Sorting the Stored Channels
Move Enter Return
Channel
Auto Store
√√
Manual Store
√√
Add/Delete
√√
Sort
√√
Name
√√
††
More
TV
Move
œœ √√
Adjust Return
Sort
From
œœ
P 1 -----
√√
To : P-- -----
Store : ?
TV
Move
œœ √√
Adjust Return
Sort
From : P 1 -----
To
œœ
P 2 -----
√√
Store : ?
TV
Move
œœ √√
Adjust Return
Sort
From : P 2 -----
To : P 1 -----
Store
œœ
OK
√√
TV
English-14
AA68-03336B-00Eng 12/7/04 2:31 PM Page 14

You can store up to 100 television channels, including those
received via cable networks.
When storing channels manually, you can choose:
◆Whether or not to store each of the channels found
◆The programme number of each stored channel which
you wish to identify
1Press the MENU
()
button.
Result: The main menu is displayed.
2Press the ▼or ▲ button to select Channel.
Result: The options available in the Channel group are
displayed.
3Press the ENTER ( ) button.
4Press the ▼or ▲ button to select Manual Store.
5Press the ENTER ( ) button.
Result: The options available in the Manual Store group are
displayed with Programme is selected.
6To assign a programme number to a channel, press the œ or √
button.
7Press the ▼or ▲ button to select Colour System. Indicate the
broadcasting standard required by pressing the œ or √button
repeatedly.
Result: The colour standards are displayed in the following
order:
AUTO - PAL - SECAM - NT4.43.
8Press the ▼or ▲ button to select Sound System. Select the
sound standard required by pressing the œ or √button repeatedly.
Result: The sound standards are displayed in the following
order:
BG - DK - I - L.
Storing Channels Manually
Move Enter Return
Channel
Auto Store
√√
Manual Store
√√
Add/Delete
√√
Sort
√√
Name
√√
††
More
TV
Move
œœ √√
Adjust Return
Manual Store
Programme
œœ
P 1 -----
√√
Colour System : AUTO
Sound System : DK
Search : 0MHz
Channel : C--
Store : ?
TV
Move
œœ √√
Adjust Return
Manual Store
Programme : P 1 -----
Colour System
œœ
AUTO
√√
Sound System : DK
Search : 0MHz
Channel : C--
Store : ?
TV
Move
œœ √√
Adjust Return
Manual Store
Programme : P 1 -----
Colour System : AUTO
Sound System
œœ
DK
√√
Search : 0MHz
Channel : C--
Store : ?
TV
English-15
AA68-03336B-00Eng 12/7/04 2:31 PM Page 15

9If you know the number of the channel to be stored, see the
following steps.
◆ Press the ▼or ▲ button to select Channel.
◆ Press the √ button.
◆ Press the ▼or ▲ button to select C(Air channel) or S(Cable
channel).
◆ Press the √ button.
◆ Press the ▼or ▲ button to select indicate the required
number.
➢You can also select the channel number directly by
pressing the numeric buttons (0~9).
➢If no sound or abnormal sound, re-select the sound system
required.
10 If you do not know the channel numbers, select Search by
pressing the ▼or ▲ button. Press the œ or √button to start the
search.
Result: The tuner scans the frequency range until the first
channel or the channel that you selected is received
on your screen.
11 To store the channel and associated programme number, select
Store by pressing the ▼or ▲ button. Press the œ or √button to
select OK.
12 Repeat Steps 9to 11 for each channel to be stored.
13 When you have finished, press the EXIT ( ) button to exit.
☛Channel mode
◆P(Programme mode): When completing tuning, the
broadcasting stations in your area have been assigned to
position numbers from P00 to max P99. You can select a
channel by entering the position number in this mode.
◆C(Real channel mode): You can select a channel by
entering the assigned number to each air broadcasting station
in this mode.
◆S(Cable channel mode): You can select a channel by
entering the assigned number for each cable channel in this
mode.
Storing Channels Manually (continued)
Adjust
œœ √√
Move Return
Manual Store
Programme : P 1 -----
Colour System : AUTO
Sound System : DK
Search : 0MHz
Channel
œœ
C1
√√
Store : ?
TV
Move
œœ √√
Search Return
Manual Store
Programme : P 1 -----
Colour System : AUTO
Sound System : DK
Search
œœ
46MHz
√√
Channel : C 1
Store : ?
TV
Move
œœ √√
Adjust Return
Manual Store
Programme : P 1 -----
Colour System : AUTO
Sound System : DK
Search : 46MHz
Channel : C 1
Store
œœ
OK
√√
TV
English-16
AA68-03336B-00Eng 12/7/04 2:31 PM Page 16

You can exclude the channels you chosen from the channels you
scanned. When you scan through the stored channels, those you
have chosen to skip are not displayed.
All of the channels that you do not specifically choose to skip are
displayed during scanning.
1Press the MENU
()
button.
Result: The main menu is displayed.
2Press the ▼or ▲ button to select Channel.
Result: The options available in the Channel group are
displayed.
3Press the ENTER ( ) button.
4Press the ▼or ▲ button to select Add/Delete.
5Press the ENTER ( ) button.
Result:
The stored channels are displayed.
6Press the ▼or ▲ button to select the channel to add or erase.
If necessary, select Added or Deleted by pressing the œ or √
button.
7Repeat Step 6for each channel to be added or erased.
8When you have finished, press the EXIT ( ) button to exit.
Skipping Unwanted Channels
Move Enter Return
Channel
Auto Store
√√
Manual Store
√√
Add/Delete
√√
Sort
√√
Name
√√
††
More
TV
Move
œœ √√
Adjust Return
Add/Delete
P 1
œœ
Added
√√
P 2 : Added
P 3 : Added
P 4 : Added
TV
Move
œœ √√
Adjust Return
Add/Delete
P 1
œœ
Deleted
√√
P 2 : Added
P 3 : Added
P 4 : Added
TV
English-17
AA68-03336B-00Eng 12/7/04 2:31 PM Page 17

Channel names will be assigned automatically when channel
information is broadcast. These names can be changed, allowing
you to assign new names.
1Press the MENU
()
button.
Result: The main menu is displayed.
2Press the ▼or ▲ button to select Channel.
Result: The options available in the Channel group are
displayed.
3Press the ENTER ( ) button.
4Press the ▼or ▲ button to select Name.
5Press the ENTER ( ) button.
Result: The current channels are displayed.
6If necessary, select the channel to be assigned to a new name by
pressing the ▼or ▲ button.
7Press the ENTER ( ) button.
8Press the ▼or ▲ button to select a letter (A~Z), a number (0~9) or
a symbol (
- , space). Move on the previous or next letter by
pressing the œ or √button.
9Repeat Steps 6to 8for each channel to be assigned to a new
name.
10 When you have finished, press the EXIT ( ) button to exit.
Assigning Names to Channels
Move Enter Return
Channel
Auto Store
√√
Manual Store
√√
Add/Delete
√√
Sort
√√
Name
√√
††
More
TV
Move
œœ √√
Adjust Return
Name
P 1
œœ
-----
√√
P 2 : -----
P 3 : -----
P 4 : -----
TV
Adjust
œœ √√
Move Return
TV Name
P 1
œœ
A
√√
P 2 : -----
P 3 : -----
P 4 : -----
English-18
AA68-03336B-00Eng 12/7/04 2:31 PM Page 18

If the reception is clear, you do not have to fine tune the channel,
as this is done automatically during the search and store operation.
If the signal is weak or distorted, you may have to fine tune the
channel manually.
1Press the MENU
()
button.
Result: The main menu is displayed.
2Press the ▼or ▲ button to select Channel.
Result: The options available in the Channel group are
displayed.
3Press the ENTER ( ) button.
4Press the ▼or ▲ button to select Fine Tune.
5Press the ENTER ( ) button.
6To obtain a sharp and clear picture and good sound quality, press
the œ or √button.
Result: The horizontal bar is displayed. Move the horizontal
bar’s cursor left or right by pressing the œ or √button.
7To store the fine tuning setting in the TV’s memory, press the
ENTER ( ) button.
Result: Channel indicator turns into Red.
8To erase adjusted picture or sound, select Reset by pressing the
▼or ▲ button. Press the ENTER ( ) button.
Result: Channel indicator returns to its original colour.
9When you have finished, press the EXIT ( ) button to exit.
Fine Tuning Channel Reception
Fine Tune P 1
Reset
Move Enter Return
Channel
……
More
Fine Tune
√√
LNA : Off
TV
1
Move Save
œœ √√
Adjust Return
English-19
Depending on the model
AA68-03336B-00Eng 12/7/04 2:31 PM Page 19

This function is very useful in the situation that the TV is used in
weak signal. LNA amplifies the TV signal in the weak signal area,
but not noise. This feature is working only weak signal condition,
and that is memorized on current channel, additional.
1Press the MENU
()
button.
Result: The main menu is displayed.
2Press the ▼or ▲ button to select Channel.
Result: The options available in the Channel group are
displayed.
3Press the ENTER ( ) button.
4Press the ▼or ▲ button to select LNA.
5To activate this feature, select On by pressing the œ or √button.
6When you have finished, press the EXIT ( ) button to exit.
➢Setting the LNA option to “On”may produce worse picture
quality due to the current channel’s signal condition.
Hence, apply LNA On/Off selectively according to the
picture quality that is currently displayed.
Using the LNA (Low Noise Amplifier) feature (depending on the model)
Move
œœ √√
Adjust Return
Channel
……
More
Fine Tune
√√
LNA
œœ
On
√√
TV
English-20
AA68-03336B-00Eng 12/7/04 2:31 PM Page 20