Samsung DIGIMAX A50 User manual

ENGLISH
User’s Manual
Thank you for buying a Samsung Camera.
This manual will guide you through using the camera, including capturing images,
downloading images and using the application software.
Please read this manual carefully before using your new camera.

ŝ2Ş
Instructions
ƈUse this camera in the following order
Insert the
USB cable
Set up the
camera driver
Before connecting the camera to a PC, via the
USB cable, you will need to set up the camera
driver. Install the camera driver that is contained in
the Application S/W CD-ROM.(p.104)
Take a picture (p.19)
Insert the supplied USB cable into the PC’s USB
port and the camera’s USB connection
terminal.(p.112)
Check the camera’s power. If the power is turned
off, press the camera button to turn on.
Take a picture
Check the
camera’s power
Check
[Removable Disk]
Open WindowŖs EXPLORER and search for
[Removable Disk].(p.113)
ƃIf you use a card reader to copy the images on the memory card to your PC, the images
could be damaged. When transferring the images taken with the camera to your PC, be sure
to use the supplied USB cable to connect the camera to your PC. Please note that the
manufacturer holds no responsibility for loss or damage of images on the memory card due
to the use of a card reader.

ƃGetting to know your camera 5
ƃDanger 6
ƃWarning 6
ƃCaution 7
ƃAn FCC warning 7
ƃSystem chart 8
ƃIdentification of features 10
ƈFront & Top 10
ƈBack & Side 10
ƈBottom/ 5-function button 11
ƈSelf-timer lamp 12
ƈCamera Status Lamp 12
ƈMode icon 12
ƃConnecting to a Power Source 13
ƈUsing the batteries 14
ƃ Instructions on how to use the memory card 15
ƃInserting the memory card 17
ƃRemoving the memory card 17
ƃLCD monitor indicator 18
ƃChanging the recording mode 19
ƈSelecting the [MODE] menu 19
ƃStarting the recording mode 22
ƈHow to use the Auto mode 22
ƈHow to use the Movie clip mode 22
ƈRecording the movie clip without voice 23
ƈUsing Successive Recording 23
ƈHow to use the Program mode 23
ƈHow to use the Scene modes 24
ƈ How to use the VOICE RECORDING mode 25
ƃThings to Watch Out for When Taking
Pictures 26
ƃUsing the camera buttons to adjust the
camera 27
ƈPOWER button 27
ƈSHUTTER button 27
ƃZOOM W/ T button 27
ƃVoice recording/ Voice memo/ UP button 30
ƃMacro/ Down button 31
ƃFocus lock 32
ƃFlash/ Left button 33
ƃSelf-timer/ Right button 35
ƃMENU/ OK button 36
ƃM (Mode) button 36
ƃE (Effect) button 39
ƃSpecial Effect : Colour 39
ƃSpecial Effect : Preset focus frames 40
ƃSpecial Effect : Composite shooting 41
ƃSpecial Effect : Photo Frame 43
ƃMovie Clip frame stabilizer 44
ƃ+/- button 45
ƃUsing the LCD monitor to adjust the
camera settings 48
ƃHow to use the menu 50
ƃMode 50
ƃMODE SET 51
ƃSize 52
ƃQuality/ Frame rate 53
ƃMetering 54
ƃContinuous Shooting 54
ƃSharpness 55
ƃOSD(On Screen Display) information 55
ƃStarting play mode 56
ƈPlaying back a still image 56
ƈPlaying back a movie clip 57
ƈHow to capture the movie clip 57
ƈOn camera movie trimming 58
ŝ3Ş
Contents
READY
RECORDING
PLAY

ƈPlaying back a recorded voice 59
ƃLCD monitor indicator 60
ƃUsing the camera buttons to adjust the
camera 61
ƃThumbnail/ Enlargement button 61
ƃVoice memo/ Up button 62
ƃPlay & Pause/ Down button 63
ƃDelete button 64
ƃLeft/ Right/ Menu/ OK button 65
ƃAlbum button 66
ƃSetting up the play back function using the
LCD monitor 69
ƃRotating an image 72
ƃResize 73
ƃProtecting images 74
ƃDeleting all images 75
ƃDPOF 75
ƃDPOF : STANDARD 76
ƃDPOF : INDEX 76
ƃDPOF : PRINT SIZE 77
ƃDPOF : CANCEL 77
ƃCOPY TO CARD 78
ƃPictBridge 79
ƃPictBridge : Picture Selection 80
ƃPictBridge : Print Setting 81
ƃPictBridge : Printing 82
ƃPictBridge : RESET 83
ƃSetup menu 84
ƃFile name 85
ƃAuto power off 86
ƃLanguage 87
ƃFormatting a memory card 87
ƃSetting up the Date/ Time/ Date type 88
ƃImprinting the recording date 88
ƃAuto Focus lamp 89
ƃSound 89
ƃLCD brightness 90
ƃQuick view 90
ƃInitialisation 91
ƃSetting up the MYCAM menu 92
ƃStart up image 92
ƃShutter sound 93
ƃStart up sound 93
ƃImportant notes 94
ƃWarning indicator 96
ƃBefore contacting a service centre 97
ƃSpecifications 100
ƃSoftware Notes 102
ƃSystem Requirements 102
ƃAbout the software 103
ƃSetting up the application software 104
ƃStarting PC mode 112
ƃRemoving the USB Driver for
Windows 98SE 115
ƃRemovable Disk 116
ƃRemoving the removable disk 117
ƃSetting up the USB Driver for MAC 118
ƃUsing the USB Driver for MAC 118
ƃDigimax Master 119
ƃFAQ 124
ŝ4Ş
Contents
SOFTWARE
SETUP

ŝ5Ş
Getting to know your camera
Thank you for buying a Samsung Digital Camera.
ƃPrior to using this camera, please read the user manual thoroughly.
ƃWhen you require After Sales service, please bring the camera and the cause of the camera
malfunction (such as Battery, Memory card etc.) to the A/S centre.
ƃPlease check that the camera is operating properly prior to when you intend to use it
(e.g. for a trip or an important event) to avoid disappointment. Samsung camera takes no
responsibility for any loss or damages that may result from camera malfunction.
ƃKeep the manual in a safe place.
ҬMicrosoft, Windows and Windows logo are registered trademarks of Microsoft Corporation
incorporated in the United States and/or other countries.
ҬAll brand and product names appearing in this manual are registered trademarks of their
respective companies.
DANGER
DANGER indicates an imminently hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING
WARNING indicates a potentially hazardous situation, which, if not avoided,
could result in death or serious injury.
CAUTION
CAUTION indicates a potentially hazardous situation, which, if not avoided, may
result in a minor or moderate injury.
This manual contains instructions on using this camera that will help you to use this
camera safely and correctly. This will help prevent danger and injury to others.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate
collection systems) This marking shown on the product or its literature, indicates that
it should not be disposed with other household wastes at the end of its working life.
To prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate this from other types of wastes and recycle it responsibly to
promote the sustainable reuse of material resources. Household users should contact either the
retailer where they purchased this product, or their local government office, for details of where
and how they can take this item for environmentally safe recycling. Business users should
contact their supplier and check the terms and conditions of the purchase contract.
This product should not be mixed with other commercial wastes for disposal.

ŝ6Ş
Danger
ƈDo not attempt to modify this camera in any way. This may result in fire, injury, electric shock
or severe damage to you or your camera. Internal inspection, maintenance and repairs
should be carried out by your dealer or Samsung Camera Service centre.
ƈPlease do not use this product in close proximity to flammable or explosive gases, as this
could increase the risk of explosion.
ƈShould any form of liquid or a foreign object enter the camera, do not use it. Switch off the
camera, and then disconnect the power source.
You must contact your dealer or Samsung Camera Service centre.
Do not continue to use the camera as this may cause a fire or electric shock.
ƈDo not insert or drop metallic or inflammable foreign objects into the camera through access
points e.g. the memory card slot and battery chamber.
This may cause a fire or electric shock.
ƈDo not operate this camera with wet hands. This could pose a risk of electric shock.
ƈDo not use the flash in close proximity to people or animals.
Positioning the flash too close to your subject’s eyes, may cause eyesight damage.
ƈFor safety reasons keep this product and accessories out of reach of children or animals to
prevent accidents e.g.:
ҮSwallowing battery, or small camera accessories. If an accident should occur, please
consult a doctor immediately.
ҮThere is the possibility of injury from the camera’s moving parts.
ƈBattery and camera may become hot during prolonged use and it may result in camera
malfunction. Should this be the case, allow the camera to sit idle for a few minutes to allow it
time to cool.
ƈDo not leave this camera in places subject to extremely high temperatures, such as a sealed
vehicle, direct sunlight or other places of extreme variances in temperature.
Exposure to extreme temperatures may adversely affect the cameraŖs internal components
and could cause a fire.
ƈWhen in use, do not cover the camera.
This may cause heat to build up and distort the camera body or cause a fire.
Always use the camera and its accessories in a well-ventilated area.
Warning

ŝ7Ş
Caution
ƈLeaking, overheating, or burst battery could result in fire or injury.
ҮUse battery with the correct specification for the camera.
ҮDo not short circuit, heat or dispose of battery in fire.
ҮDo not insert the battery with the reverse polarities.
ƈRemove the battery when not planning to use the camera for a long period of time.
Battery may leak corrosive electrolyte and permanently damage the camera’s components.
ƈDo not fire the flash while it is in contact with hands or objects. Do not touch the flash after
using it continuously. It may cause burns.
ƈTake care not to touch the lens and where the lens cover is to avoid taking an unclear image
and possibly causing camera malfunction.
ƈAvoid obstructing the lens or the flash when you capture an image.
An FCC warning
ҮThis device has been tested in accordance with the limits of a class B digital device
under item 15 of the FCC rules. These limits are designed to provide protection
against harmful interference in commercial installation. This equipment generates,
absorbs and can emit radio frequency energy. If it is not installed and used in
accordance with the instructions, it may cause harmful interference to radio
communication.
There is however, no guarantee that interference will not occur in some situations.
Should any interference occur when this device is in operation, please try one or
more of the following measures.
ƈChange the location and direction of any aerial.
ƈIncrease distance between the camera and the affected device.
ƈUse a different socket away from the affected device.
ƈPlease contact a Samsung agent or a radio/TV engineer.
ҮThis device complies with part 15 of the FCC Rules.
ҮChanges or modifications not expressly approved by the party responsible for
compliance could void user's authority to operate the equipment.

ŝ8Ş
System chart
Please check that you have the correct contents before using this product. To buy the optional
equipment, contact your nearest Samsung dealer or Samsung service centre.
Pouch

User manual
Product warranty
Camera strap Software CD
(see p.103)
SD memory card/MMC
(see p.15)
DPOF compatible printer
(see p.75)
Rechargeable battery
(SBP-1303)
Rechargeable batteries
(SNB-2312)
CR-V3 battery
Battery charger
(SBC-L1)
Battery charger
(SBC-N1)
AC cord
AA Alkaline
Batteries
< Included items >

ŝ9Ş
System chart
For Windows
ҮPC with processor better than
Pentium II 450MHz (XP : Pentium 700MHz)
ҮWindows 98/ 98SE/ 2000/ ME/ XP
ҮMinimum 64MB RAM (XP : 128MB)
Ү200MB of available hard-disk space
(Over 1GB recommend)
ҮUSB port
ҮCD-ROM drive
Ү1024 x768 pixels, 16-bit colour display
compatible monitor (24-bit colour display
recommended)
ҮDirectX 9.0 or later
For Macintosh
ҮPower Mac G3 or later
ҮMac OS 9.0~10.2
ҮMinimum 64MB RAM
Ү110MB of available hard-disk space
ҮUSB port
ҮCD-ROM drive
ҮQuickTime player or a media player that
supports AVI file format
ҮDivX (for movie clip)
System Requirements
When you connect the camera to a
computer or printer, you have to use the
USB cable supplied with the camera, or the
external devices may not recognise the
camera.
CAUTION
USB cable
PictBridge compatible
printer(see p.63)
Computer
(see p.112)

ŝ10Ş
Identification of features
Front & Top
Back & Side
Flash
LCD monitor
Shutter button
Power button
Play mode button
Speaker
Microphone
USB port
Self-timer lamp/
Auto Focus lamp
Lens
5 function button
E (Effect) button
Strap eyelet
Zoom T button
(Digital zoom)
Zoom W button
(Thumbnail)
M(Mode/Album) button
+/-,
DELETE button
Camera status lamp

ŝ11Ş
Identification of features
Bottom/ 5-function button
FLASH/
LEFT button
MENU/
OK button
Macro/ DOWN button
Play & Pause button
SELF-TIMER/
RIGHT button
Voice memo/ Voice recording/ UP button
Battery chamber
Memory card slot
Battery chamber
cover

ŝ12Ş
Identification of features
ƈMode icon : Refer to page 51 for more information about the camera mode setting.
MODE MOVIE CLIP VOICE RECORDING AUTO PROGRAM PLAY
ICON
NIGHT PORTRAIT CHILDREN LANDSCAPE CLOSE UP
ICON
MODE SUNSET DAWN BACKLIGHT FIREWORKS BEACH&SNOW
ICON
MODE
SCENE
ƈSelf-timer lamp
Icon Status Description
Blinking For the 2 seconds, the lamp blinks quickly at 0.25-second intervals.
- For the first 7 seconds, the lamp blinks at 1 second intervals.
- For the final 3 seconds, the lamp blinks quickly at 0.25-second intervals.
A picture will be taken after about 10 seconds and 2 seconds later a
second picture will be taken.
ƈCamera Status Lamp
Status Description
Power on The lamp turns on and off when the camera is ready to take a picture
After taking a picture The lamp blinks while saving the image data and turns off when the
camera is ready to take a picture
While movie recording The lamp blinks at a 0.25-second interval
While voice recording The lamp blinks at a 0.25-second interval
When the USB cable is inserted to a PC The lamp lights up (LCD monitor turns off after initializing the device)
Transmitting Data with a PC The lamp blinks (LCD monitor turns off)
When the USB cable is inserted to a printer The lamps is off
When the printer is printing The lamp blinks
Blinking
Blinking

ŝ13Ş
Connecting to a Power Source
ƈYou can use batteries only to provide the camera with power.
ƃWe recommend using batteries for a digital camera (Within a year from the date of
manufacture). The batteries are listed below.
Non rechargeable batteries : AA type - Alkaline
CR-V3 type - Lithium Ion battery
Rechargeable batteries : AA type - Ni-MH battery
(Samsung SNB-2312 recommended)
CR-V3 type - Lithium Ion battery
(Samsung SBP-1303 recommended)
ƃIt is easy to buy alkaline batteries. However, the duration for using batteries varies in
accordance with the battery manufacturer or the photographic conditions.
ƃWhen the camera is not used, turn off the camera power.
ƃDo not recharge the non rechargeable batteries. It may cause an explosion.
ƃPlease remove the batteries if the camera will not be used for long periods. Batteries can lose
power over time and are prone to leaking if kept inside the camera.
ƃWe recommend high capacity batteries (listed above) as manganese batteries cannot deliver
sufficient power.
ƃLow temperatures (below 0°C) can affect the performance of the batteries and you may
experience reduced battery life. Batteries will usually recover at normal temperatures.
ƃDo not use old and new batteries at the same time.
ƃDuring extended use of the camera, the camera body may become warm.
This is perfectly normal.

ŝ14Ş
Battery status
Battery indicator
The battery are fully
charged Prepare new battery
There is no battery capacity.
Replace with new battery.
ƈThere are 3 indicators for battery condition that are displayed on the LCD monitor.
ƃWhen the battery chamber cover is opened, do not press the battery chamber cover by
force. This may cause the battery chamber cover modification or breakage.
INFORMATION
Connecting to a Power Source
3. To close the battery chamber cover, push it until it clicks.
2. Insert the batteries taking note of the
polarity (+/ -).
1. Open the battery chamber cover by pushing in the direction of the
arrow.
: If the camera does not turn on after you have inserted batteries,
please check whether the batteries are inserted with the correct
polarity (+/ -).
Using the batteries
[ Inserting the AA type battery ][ Inserting the CR-V3 type battery ]

ŝ15Ş
Instructions on how to use the memory card
ƃBe sure to format the memory card (see p.87) if you are using a newly purchased memory for
the first time, if it contains data that the camera cannot recognise, or if it contains images
captured with a different camera.
ƃTurn off the camera power whenever the memory card is being inserted or removed.
ƃRepeated use of the memory card will eventually reduce the memory card’s performance.
Should this be the case, you will need to purchase a new memory card.
Wear and tear on the memory card is not covered by the Samsung warranty.
ƃThe memory card is an electronic precision device.
Do not bend, drop or subject the memory card to any heavy impact.
ƃDo not store the memory card in an environment with strong electronic or magnetic fields,
e.g. near loud speakers or TV receivers.
ƃPlease do not use or store in an environment where there are extremes in temperature.
ƃDo not allow the memory card to become dirty or to come into contact with any liquid.
Should this happen, clean the memory card with a soft cloth.
ƃPlease keep the memory card in its case when not in use.
ƃDuring and after periods of extended use, you may notice that the memory card is warm.
This is perfectly normal.
ƃDo not use a memory card that is used in another digital camera.
To use the memory card in this camera, format the memory card using this camera.
ƃDo not use a memory card formatted by another digital camera or memory card reader.
ƃIf the memory card is subjected to any of the following, the recorded data may become
corrupted :
- When the memory card is used incorrectly.
- If the power is switched off or the memory card is removed while recording, deleting
(formatting) or reading.
ƃSamsung cannot be held responsible for lost data.
ƃIt is advisable to copy important data onto other media as back-up e.g. floppy disks, hard
disks, CD etc.
ƃIf there is insufficient memory available
: A [CARD FULL!] message will appear and the camera will not operate. To optimise the
amount of memory in the camera, replace the memory card or delete unnecessary images
stored on the memory.

ŝ16Ş
Instructions on how to use the memory card
ƃDon't remove the memory card when the camera status lamp is blinking as this may
cause damage to data in the memory card.
INFORMATION
[ SD (Secure Digital) memory card ]
Write protect
switch
Label
Card pins
ƈThe camera can use SD Memory Cards and MMC (Multi Media Cards). Please consult the
enclosed manual for using the MMC Cards.
The SD memory card has a write protect switch
that prevents image files from being deleted or
formatted. By sliding the switch to the bottom of
the SD memory card, the data will be protected.
By sliding the switch to the top of the SD memory
card, the data protection will be cancelled.
Slide the switch to the top of the SD memory card
before taking a picture.
ƈWhen using a 10MB memory, the specified shooting capacity will be as follows.
These figures are approximate as image capacities can be affected by variables such as
subject matter.
Recorded image size S. FINE FINE NORMAL 30FPS 15FPS
5M(2592x1944) 2 5 9 - -
4M(2272x1704) 3 7 12 - -
3M(2048x1536) 4 8 16 - -
2M(1600x1200) 8 15 22 - -
1M(1024x768) 21 30 38 - -
VGA(640x480) 47 56 62 - -
640(640X480) - - - About 26sec About 43sec
320(320X240) - - - About 1min 22 sec About 2min 7sec
160(160X128) - - - About 3min 4sec About 4min 12sec
Still
image
Movie
clip

ŝ17Ş
Inserting the memory card
3. To close, push the battery chamber cover until you hear a
click. If the memory card does not slide in smoothly, do
not attempt to insert it by force. Check the direction of
insertion, and then insert it correctly. Do not insert the
memory card the wrong way round. Doing so may
damage the memory card slot.
2. Have the front of the memory card facing toward the front
of the camera (lens) and the card pins toward the back of
the camera (LCD monitor), and then push the memory
card into the card slot until you hear a click.
1. Turn off the camera’s power and pull the battery chamber
cover in the direction of the arrow to open.
1. Turn the power off using the power button.
Open the battery chamber cover and press the memory
card as shown in the image and release.
2. Remove the memory card and close the battery chamber
cover.
Removing the memory card
ƃWhen the camera is turned on, inserting or removing the memory card turns the camera
power off.
INFORMATION

ŝ18Ş
LCD monitor indicator
ƈThe LCD monitor displays information about the shooting functions and selections.
[Image & Full Status]
No. Description Icons Page
2Battery p.14
3Continuous shot AEB p.54
4Flash p.33
5Self-timer p.35
6Macro p.31
7Metering p.54
8Card inserted indicator -
9Auto focus frame -
10 Camera shake warning -
11 Date/ Time 2005.07.01 01:00 PM p.88
12 Exposure compensation p.47
13 ISO p.46
14 White Balance p.46
15 RGB RGB p.45
16 Sharpness p.55
Recording mode
1p.51
ڹ
ں
ڻ
ڼ
ڽ
ھ
ڿ
ۀ
ۅ
ۄ
ۆ
ۇ
؆
؅
؇
؈
ۂہ ۃ
؊؉

ŝ19Ş
LCD monitor indicator
Changing the recording mode
ƈYou can select the desired working mode by the M (mode) button located on the back of the
camera and [MODE], [MODE SET] menu. Auto, Program, movie clip, scene (night, portrait,
children, landscape, close-up, sunset, dawn, backlight, fireworks, beach & snow) camera
modes are available.
STILL & MOVIE
FULL
CUSTOM
MODE
17 Image quality p.53
Number of available shots remaining 15 p.16
Remaining time (Movie clip/ Voice recording) 00:01:30/ 01:00:00 p.16
20 Voice memo/ Mic. off p.30/23
19
18 p.52
Image size
Optical/ Digital Zoom bar/
Digital Zoom rate
21 p.27
ƃSelecting the [MODE] menu
1. Insert the battery (p.14).
2. Insert the memory card (p.17). As this camera has a 10MB internal memory, you do not
need to insert the memory card. If the memory card is not inserted, an image will be stored
in the internal memory. If the memory card is inserted, an image will be stored on the
memory card.
3. Close the battery chamber cover.
4. Press the power button to turn on the camera.
5. Press the menu button and a menu will display.
6. Use the Left/ Right button to select the [MODE] menu.
7. Select [STILL & MOVIE], [FULL] or [CUSTOM] sub menu
by pressing the UP/DOWN button.
- [STILL & MOVIE] : A still image mode that was selected on
the [MODE SET] menu and movie clip
mode can be selected.
Refer to page 51 for more information about using the [MODE SET] menu.
- [FULL] : Auto, Program, Movie clip and scene modes can be selected.
- [CUSTOM] : Modes set as on in the [MODE SET] menu can be selected.
8. Press the MENU button and the menu will disappear.

ŝ20Ş
Changing the recording mode
ƃChanging the recording mode : If the [STILL & MOVIE] menu was selected
Steps from 1-4 are the same as those for selecting the [MODE] menu.
5. A recording mode used just before will display.
6. Press the M (Mode) button located on the back of the camera and the recording mode will
change to the movie clip mode.
7. Press the M (Mode) button again and a still image mode selected on the [MODE SET]
menu will be selected.
ƃChanging the recording mode : If the [FULL] menu was selected
Steps from 1-4 are the same as those for selecting the [MODE] menu.
5. A recording mode used just before will display.
6. Press the M (Mode) button located on the back of the camera and the mode selection
menu will display.
7. To select the Auto, Program, Movie clip or Scene modes, press the Left/ Right button.
To move between the Auto, Manual, Movie clip menu line and Scene menu line, press the
Up/ Down button.
8. Press the M (Mode) button and the mode selection menu will disappear.
Pressing the M (Mode) button
[AUTO mode] [MOVIE CLIP mode]
Pressing the Up button
NIGHT
[Selecting the Scene mode]
Pressing the Left button
[Mode selection menu]
AUTO MOVIE
[Selecting the Movie clip mode]
MENU/OK:SET MENU/OK:SET
MENU/OK:SET