Samsung NX300 User manual

DIGITAL CAMERA CONTENTS
SERVICE
Manual
1. Repair information
2. Product specifications
3. Disassembly and reassembly
4. Troubleshooting
5. PCB diagram
6. Block diagram
7. Firmware update
8. Adjustment
9. Exploded view and parts list
NX300
DIGITAL CAMERA

Contents
1. Repair information
1-1 Customer satisfaction statement..........................................1-1
1-2 Warranty and repair service information............................... 1-1
1-3 Precaution for disassembly and reassembly......................... 1-4
2. Product specifications
2-1 Specifications ..................................................................... 2-1
2-2 Product comparison ............................................................2-2
2-3 Accessories information ...................................................... 2-3
2-4 About the memory card .......................................................2-5
2-5 About the battery ................................................................2-6
3. Disassembly and reassembly
3-1 Disassembly ....................................................................... 3-1
3-2 Reassembly...................................................................... 3-20
4. Troubleshooting
4-1 Regarding to memory card recognition ................................ 4-1
4-2 Regarding to MAIN PCB connection ................................... 4-2
4-3 Regarding to TOP ..............................................................4-3
4-4 Regarding to image display .................................................4-4
4-5 Regarding to voice playback and recording .......................... 4-4
5. PCB diagram
5-1 MAIN PCB ..........................................................................5-1
5-2 CIS PCB............................................................................. 5-1
5-3 BACK PCB .........................................................................5-2
5-4 TOP PCB............................................................................5-2
5-5 HOT SHOE PCB .................................................................5-3
5-6 TILT PCB............................................................................ 5-3
6. Block diagram
6-1 Block diagram.....................................................................6-1

Contents
7. Firmware update
7-1 Factory data reset...............................................................7-1
7-2 Firmware update by using user menu .................................. 7-4
7-3 Firmware update by using CS menu .................................... 7-6
7-4 How to recover the MAIN PCB.............................................7-9
8. Adjustment
8-1 Adjustment items ................................................................8-1
8-2 Test Mode...........................................................................8-2
8-3 CIS TILT Adjustment ...........................................................8-3
8-4 CIS DOT Data Input & SHUTTER Adjustment....................... 8-4
8-5 ISO Adjustment................................................................... 8-9
8-6 AWB Adjustment .................................................................8-9
8-7 VFPN & CMOS Defact Adjustment ..................................... 8-10
8-8 Color Shading Adjustment ................................................. 8-11
8-9 Country setting (Wi-Fi) ...................................................... 8-12
8-10 S/N, Mac address Input ................................................... 8-12
8-11 PAF (Phase AF) Adjustment............................................. 8-13
8-12 NFC Tag Information Record ........................................... 8-15
8-13 Adjustment data Image Storage ....................................... 8-18
9. Exploded view and parts list
9-1 ASSY BODY .......................................................................9-1
9-2 ASSY MAIN ........................................................................9-3
9-3 ASSY CHAMBER ................................................................9-5
9-4 ASSY COVER TOP ............................................................. 9-6
9-5 ASSY FPCB_HOTSHOE...................................................... 9-7
9-6 ASSY SPEAKER .................................................................9-8
9-7 ASSY COVER BACK ........................................................... 9-9
9-8 ASSY BACK...................................................................... 9-10
9-9 ASSY TILT LCD ................................................................ 9-12
9-10 ASSY CMOS................................................................... 9-13
9-11 ASSY LCD SUB............................................................... 9-14

Precautions
Copyright ⓒ since 1995 Samsung Electronics. All rights reserved. 1-1
1. Repair information
1-1 Customer satisfaction statement
1-2 Warranty and repair service information
■ Combining perfect technical solutions with a customer-oriented approach is our top priority.
■ We treat our customers we serve with kindness, loyalty, respect and dignity.
■ We are committed to earn customers’ trust continuously through excellence in repair solutions.
■ We keep our promises and commitments to our customers.
■ Committed to quick and easy resolution of all support issues, we deliver industry-leading
response times.
[Guide]
We listen carefully to our customers' requirements and always nd an optimum solution for their needs.
We are committed to your satisfaction and have procedures in place to provide you with a fair, timely and effective means to resolve problems. It
combines industry leading preventive assistance with responsive support that helps us address problems quickly and effectively.
We will continuously maintain and improve our services to satisfy the needs of our customers.
We hold ourselves to the highest standards of customer satisfaction and service.
(1) General terms and conditions
It is guaranteed to be free of charge from defects in material and workmanship under normal use for a period
of one year from date of purchase.
Digital Camera and lens come with a one year limited warranty from the date of purchase.
* The duration of the warranty depends on the laws in the country in which it was purchased.
The following information will be required to process warranty requests:
a. We imply warranties to one year from the original date of purchase. In the event that the purchaser is
unable to provide a warranty card or proof of purchase, the warranty period will be determined by the
date of manufacture. The warranty period shall be decreased to three months from the original product
manufactured date.
b. The coverage under this warranty begins on the date of your purchase of the product. In the event
that a warranty card or proof of purchase is not available, a purchase receipt, preferably the purchase
invoice, to conrm the date of purchase is required for warranty service.
c. In the event that a valid date of purchase is not available, the warranty period will be determined by
the date of manufacture. The warranty period shall be decreased to three months from the original
product manufactured date.

Precautions
1-2 Copyright ⓒ since 1995 Samsung Electronics. All rights reserved.
<Table 1-1 Warranty Periods for Parts>
(2) Limited Warranty
It reserves the right to retain any parts or components replaced at its discretion in the event of a defect no-
ticed in the product. The period with respect to retaining components may vary respectively depending on its
components. We are not liable to repair or replace its faulty product after the Warranty Period has expired.
* We warrant its retaining camera and lenses for ve years and three years for the accessories.
a. If a warranty claim is led after the product has been discontinued, we reserves the right to honor the
components warranty. Warranty period may vary depending on the type of components.
b. In the event that no identical warranty information is available for service repair, company has the right to provide warranty.
The warranty does not affect the consumers' rights against the company related to its information.
For the length of the period indicated on the chart below, it starts with the date of original purchase.
Part Name Warranty Period
Battery Charger
Six months
AC Adaptor
Battery
Remote Control
CD Software Three months
Earphone
Pouch for camera Not applicable
Cable
(3) Warranty Period for components
Our liability under this warranty shall be limited to the following:
a. In the event of a same malfunction problem within two months after repair service by Samsung authorized technician,
we will repair or replace free of charge the component of the product which is found to be defective.
b. In the event of the component that you have paid the replacement cost is returned under normal use within one year at our premises,
such components will be replaced free of charge component of the product which is found to be defective.

Precautions
Copyright ⓒ since 1995 Samsung Electronics. All rights reserved. 1-3
<Table 1-2 Warranty Period for components>
Types of consumer damages Compensation
Failing to perform or
failing to function properly
under normal use
Required for essential repair within 10 days
after the purchase
Replace the prod-
uct or refund -
Required for essential repair within one
month after the purchase
Replace the
product or repair
at free of charge
Repair charges
Applicable
to repair
Problem occurred twice
due to same malfunction Free of charge
Problem occurred three
times due to same
malfunction
Replace the prod-
uct or refund
Repair charges
Problem occurred four
times due to some other
malfunction
Not applicable
to repair
Within the period with
respect to retaining
components
Replace the product at the cost of the
depreciated value or refund its price
added 10% of depreciation
Failing to perform or
failing to function properly
as a result of willful intent
and negligence of
customer
Applicable repair Repair charges
Not applicable to repair
(Except for defects or malfunction as a result
of re or ood or other natural disasters
Replacement
charge
Repair charge and replace the prod-
uct at the cost of the depreciated value
(4) Repair Claims
1) Repair free of charge
Essentially, the following causes of damage are covered:
a. Failing to function properly under normal use during the limited warranty period.
b. Repair Services free of charge is granted for the performance of a specic contract.
2) Repair charges
This warranty does not cover damage caused by:
a. Defect occurring after the expiration of the Warranty Period.
b. Damage due to negligence, immersion in water, impact, loss and tampering.
c. Repair or alteration performed by any party other than Samsung authorized technicians.
d. Misuse or other improper use of the power button.
e. Exhausted parts such as batteries, lamps and lters, etc.
f. Defect that occurs due to sand, dirt liquid, etc. entering the inside of the product casing.
g. Consumable parts which have ceased working through normal use such as as earphone, battery discharger and various accessories.
h. Products purchased second hand or any damage that occurs due to a second hand or repair performed
by anyone other than Samsung or a Samsung authorized service station.
i. Fire, earthquake, ood or other natural disasters.
The warranty cover period for components is listed below as per table 1-2.

Precautions
1-4 Copyright ⓒ since 1995 Samsung Electronics. All rights reserved.
1-3 Precaution for disassembly and reassembly
Component Precautions
FPCB FPCB is brittle material. It can be easily damaged thus it should be handled with care.
It is recommended to use wooden or plastic tweezers for manual placement.
CCD (CMOS)
IR CUT Filter
LCD, LENS
Be careful not to stained your nger. It is recommended to use wooden or plastic tweezers
for manual placement. Stain is often caused by the Alcohol used in these components.
Find a clean, well-ventilated place to do your work.
PCB Use an anti-static mat as well as an anti-static wrist strap to avoid ESD damage to PCB.
CONNECTOR The use wooden or plastic tweezers is recommended for manual placement.
Metal tip tweezer might make marks or damage.
BARREL Always follow proper direction while assembling the components of the barrel.
<Table 1-3>
1. Use the anti-static handing procedures included with the anti-static mat to ensure that there is no electrostatic
discharge and component damage.
2. Static electricity is the biggest danger to the PCB parts you are about to disassemble or assemble. It’s important
to use your anti-static wrist strap to prevent damage to these components.
3. Dismantling a discrete electronic component such as main capacitor is dangerous.
The capacitor contains high voltage, which can cause a severe electric shock if you touch it. This holds a
charge even when the unit is not plugged in and is capable of delivering a fatal shock.
4. Using excessive force during disassembly and assembly can damage locking parts. Use care when handling
“Locking parts” to avoid damage to FPCB or wire. Apply pressure only at the points designated in the maintenance
instructions.
5. Due to increasing environmental concerns, a number of restrictions have been placed on the material content
of electronic components and electronic assemblies. It requires utilizing Lead-Free (Pb-free) Soldering.
6. The following precautions must be observed when handling such components below.
CAUTION
!

Precautions
Copyright ⓒ since 1995 Samsung Electronics. All rights reserved. 1-5

Product specications
Copyright ⓒ since 1995 Samsung Electronics. All rights reserved. 2-1
2. Product specifications
2-1 Specifications
Image Sensor
Type(size) CMOS(23.5 X 15.7mm)
Effective/ Total pixels Approx. 20.3 mega-pixels/ Approx. 21.6 mega-pixels
Lens Mount
Type/ Available lens Samsung NX Mount/ Samsung lenses
Image Stabilization
Type/ Mode Lens shift (depends on lens)/ Off/Mode 1/Mode 2
i-Function
ⓘdepth, ⓘzoom (X1.2, 1.4, 1.7, 2.0)
Dust Reduction
Type Super sonic drive
Display
Type/ Size AMOLED with Touch Panel (C-type Touch Control Enabled) 3.31” (Approx. 84.0 mm)
Resolution WVGA (800X480) 768 k dots (PenTile)
Shutter
Type Electronically controlled vertical-run focal plane shutter
Speed
• Auto: 1/6,000–30 sec.
• Manual: 1/6,000–30 sec. (1/3 EV Step)
• Bulb (time limit: 4 min)
Flash
Type External Flash (Bundle with SEF8A)
Angle of view 28mm (35mm lm equivalent)
White Balance
Mode Auto WB, Daylight, Cloudy, Fluorescent White, Fluorescent NW, Fluorescent Daylight, Tungsten,
Flash WB, Custom Set, Color Temperature(Manual)
Micro adjustment Amber/Blue/Green/Magenta 7 steps respectively
Storage
External memory (optional): SD card, SDHC card, SDXC card, UHS-1 card (Class 6 and above recommended)
GPS
Type Geo-tagging with an optional GPS Module
(WGS 84)
Feature Location name (English and Korean only)
Wireless network
Function MobileLink, Remote Viewnder, Auto Backup, Email, SNS & Cloud, AllShare Play, AutoShare, Wi-Fi Direct
Interface
Digital output USB 2.0 (micro USB jack)
Video output NTSC, PAL (selectable)
HDMI 1.4a
Power Source
Type Rechargeable battery: BP1130 (1130 mAh)
Dimensions (W X H X D)
122 X 63.7 X 40.7 mm (without protrusions)
Weight
284 g (without battery and memory card)

Product specications
2-2 Copyright ⓒ since 1995 Samsung Electronics. All rights reserved.
2-2 Product comparison
NX300 NX200
Image
Image Sensor 23.5 X 15.7 mm CMOS 23.5 X 15.7 mm CMOS
Effective Pixels Approx. 20.3 mega-pixels Approx. 20.3 mega-pixels
Total Pixels Approx. 21.6 mega-pixels Approx. 21.6 mega-pixels
Weight 284 g (without battery and memory card) 220.4g (without battery and memory card)
Dimensions
(W X H X D) 122 X 63.7 X 40.7 mm (without protrusions) 116.5 X 62.5 X 36.6 mm (without protrusions)
Display
AMOLED with Touch Panel (C-type Touch Control Enabled)
3.31” (Approx. 84.0 mm)
AMOLED
3.0” ( Approx. 7.6 cm)
Focusing Phase Detection & Contrast AF Contrast AF
Angle of View 28 mm (35 mm lm equivalent) 28 mm (35 mm lm equivalent))
Shutter Speed
- Auto: 1/6,000–30 sec.
- Manual: 1/6,000–30 sec. (1/3 EV Step)
- Bulb (time limit: 4 min)
- Auto: 1/4000-30 sec.
- Manual: 1/4000-30 sec. (1/3 EV Step)
- Bulb (time limit: 4 min)
ISO
- 1 Step: Auto, ISO 100, ISO 200, ISO 400, ISO 800,
ISO 1600, ISO 3200, ISO 6400, ISO 12800, ISO 25600
- 1/3 Step: Auto, ISO 100, ISO 125, ISO 160,
ISO 200, ISO 250, ISO 320, ISO 400, ISO 500,
ISO 640, ISO 800, ISO 1000, ISO 1250, ISO 1600,
ISO 2000, ISO 2500, ISO 3200, ISO 4000, ISO 5000,
ISO 6400, ISO 8000, ISO 10000, ISO 12800, ISO 25600
-1 Step: Auto, ISO 100, ISO 200, ISO 400, ISO 800,
ISO 1600, ISO 3200, ISO 6400, ISO 12800
-1/3 Step: Auto, ISO 100, ISO 125, ISO 160, ISO 200,
ISO 250, ISO 320, ISO 400, ISO 500, ISO 640,
ISO 800, ISO 1000, ISO 1250, ISO 1600,
ISO 2000, ISO 2500, ISO 3200, ISO 4000, ISO 5000,
ISO 6400, ISO 8000, ISO 10000, 12800
Storage
External memory (optional):
SD card, SDHC card, SDXC card, UHS-1 card
(Class 6 and above recommended)
External memory (optional):
SD card , SDHC card, SDXC card
Image Stabilization Lens shift (depends on lens) Lens shift (depends on lens)
Power Source Rechargeable battery: BP1130 (1130 mAh) Rechargeable battery: BP1030 (1030 mAh)
Wireless Network
MobileLink, Remote Viewnder, Auto Backup,
Email, SNS & Cloud, AllShare Play, AutoShare,
Wi-Fi Direct
-
Model
Spec
* This specifications can change without notice to upgrade a performance.

Product specications
Copyright ⓒ since 1995 Samsung Electronics. All rights reserved. 2-3
2-3 Accessories information
• The illustrations may differ from your actual items.
• You can purchase optional accessories at a retailer or a Samsung service center. Samsung is not responsible for any problems caused by using unauthorized accessories.
Image Description Part No.
Accessories
Camera
(including the body cap and hot-hoe cover)
NX300
External ash
Black AD97-21562A
Pink AD97-21562D
White AD97-21562C
Rechargeable Battery AD43-00206A
Software CD-ROM
(User manual included) AD46-00443A
Adobe Photoshop Lightroom DVD-ROM service
does not apply
Strap
Black AD63-07021A
Pink AD63-07021C
White AD63-07021B
USB CABEL
CB5MU05E AD39-00190A
CB5MU05E _WH AD39-00202A
Adaptor
Description Part No. Description Part No.
ETA0U81EBE_EU GH44-02412A ETA0U80HWE_AUS GH44-02373C
ET0U81EWE_EU GH44-02412B ETA0U80BBB_BRA GH44-02344C
ETA0U61JBE_USA GH44-02389A ETA0U80BWB_BRA GH44-02344G
ETA0U61JWE_USA GH44-02389D ETA0U82CBC_CHI GH44-02413B
ETA0U71XBE_UK GH44-02328C ETA0U82CWC_CHI GH44-02444A
EIA-U100BE_UK 3721-001187 ETA0U80IBE_IND GH44-02349A
ET0U71XWE_UK GH44-02382E ETA0U80IWEIND GH44-02349C
EIA-U100WE_UK 3721-001236 ETA0U80RBS_ARG GH44-02374A
ETA0U80HBE_AUS GH44-02373A ETA0U80RWS_ARG GH44-02374C
Quick Start Guide
Description Part No. Description Part No.
NX300_QSG_S.CHI AD68-07820A NX300_QSG_PER AD68-07835A
NX300_QSG_ENG AD68-07821A NX300_QSG_NOR AD68-07836A
NX300_QSG_GER AD68-07822A NX300_QSG_POR AD68-07837A
NX300_QSG_FRA AD68-07823A NX300_QSG_SLO AD68-07838A
NX300_QSG_SPA AD68-07824A NX300_QSG_SLV AD68-07839A
NX300_QSG_DUT AD68-07825A NX300_QSG_TUR AD68-07840A
NX300_QSG_ITA AD68-07826A NX300_QSG_UKR AD68-07841A
NX300_QSG_RUS AD68-07827A NX300_QSG_POL AD68-07842A
NX300_QSG_SWE AD68-07828A NX300_QSG_RUM AD68-07843A
NX300_QSG_DAN AD68-07829A NX300_QSG_ENG(SEA) AD68-07844A
NX300_QSG_BUL AD68-07830A NX300_QSG_SPA(SEA) AD68-07845A
NX300_QSG_CZE AD68-07831A NX300_QSG_T.CHI AD68-07846A
NX300_QSG_ARA AD68-07832A NX300_QSG_GRE AD68-07847A
NX300_QSG_FIN AD68-07833A NX300_QSG_THA AD68-07848A
NX300_QSG_HUN AD68-07834A NX300_QSG_HEB AD68-07849A

Product specications
2-4 Copyright ⓒ since 1995 Samsung Electronics. All rights reserved.
Image Description Model name Note
Rechargeable Battery ED-BP1130
Optional
accessories
Battery charger ED-BC3NX01
access ories
Camera Case ED-CJNX300N
Mike ED-EM10
Rmote Switch ED-SR2NX02
Flash ED-SEF220A
K Mount adapter ED-MA9NXK/KR
PROTECTOR
ED-LF405PT/KR compatibility lens(2050)
ED-LF43PT/KR compatibility lens(30,45,16,20)
ED-LF52PT/KR compatibility lens(60, 50200)
ED-LF58PT/KR compatibility lens(1855, 1224)
ED-LF67PT/KR compatibility lens(18200, 85)
ND Filter
ED-LF405ND4/KR compatibility lens(2050)
ED-LF43ND4/KR compatibility lens(30,45,16,20)
ED-LF52ND4/KR compatibility lens(60, 50200)
ED-LF58ND4/KR compatibility lens(1855, 1224)
CPL Filter
ED-LF43PL/KR compatibility lens(30,45,16,20)
ED-LF52PL/KR compatibility lens(60, 50200)
ED-LF58PL/KR compatibility lens(1855, 1224)
CABLE (USB+C) EA-CB5MU05E
CABLE (HDMI) EA-CBHD10D
* This page is Optional accessories .

Product specications
Copyright ⓒ since 1995 Samsung Electronics. All rights reserved. 2-5
2-4 About the memory card
The memory capacity may differ depending on shooting scenes or shooting conditions. These capacities are based on a 2 GB SD card.
Size
Quality
Super Fine Fine Normal RAW RAW +
S.Fine
RAW +
Fine
RAW +
Normal
Photo
20.0M 5472X3648 151 179 218 69 47 49 52
10.1M 3888X2592 276 321 384 - 62 64 66
5.9M 2976X1984 423 484 565 - 71 72 74
2.0M 1728X1152 845 923 1016 - 82 83 84
Burst 479 545 631 - - - -
16.9M 5472X3080 177 208 252 - 51 53 56
7.8M 3712X2088 343 396 467 - 66 68 70
4.9M 2944X1656 487 553 640 - 74 75 76
2.1M 1920X1080 827 905 999 - 82 83 84
13.3M 3648X3648 218 255 307 - 56 58 61
7.0M 2640X2640 373 429 504 - 68 70 72
4.0M 2000X2000 559 630 721 - 76 77 78
1.1M 1024X1024 1111 1180 1258 - 86 86 87
2 GB SD card:
•
167
*
is available only with some Smart Filter options. • Several videos were recorded in succession to determine the total recording time.
• The gures above are measured without using the zoom function. • The maximum recording time is 29 minutes and 59 seconds per le.
• Available recording time may vary if you use the zoom. • The maximum playback time of For Sharing videos is 30 seconds per le.
Size Quality
HQ Normal
Video
167
*
1920X1080 (60 fps) Approx. 10' 10" Approx. 12' 43"
167
*
1920X1080 (30 fps) Approx. 17' 41" Approx. 22' 09"
167
*
1920X1080 (15 fps) Approx. 23' 38" Approx. 29' 24"
167
*
1920X810 (24 fps) Approx. 21' 35" Approx. 27' 02"
167
*
1280X720 (60 fps) Approx. 16' 51" Approx. 21' 06"
167
*
1280X720 (30 fps) Approx. 29' 11" Approx. 36' 35"
167
*
640X480 (30 fps) Approx. 120' 47" Approx. 153' 30"
167
*
For Sharing (30 fps) Approx. 218' 48" Approx. 278' 24"

Product specications
2-6 Copyright ⓒ since 1995 Samsung Electronics. All rights reserved.
2-5 About the battery
• The gures above are based on Samsung’s test standards. Your results may differ depending on your actual usage.
• Available shooting time differs depending on background, shooting interval, and use conditions.
• Several videos were recorded in succession to determine the total recording time.
Item Description
Model BP1130
Type Lithium-ion battery
Cell capacity 1130 mAh
Voltage 7.6 V
Charging time
(When the battery is completely discharged)
Approx. 210 min
Shooting mode Average time / Number of photos
Photos Approx. 175 min/Approx. 350 photos
Videos Approx. 110 min
(Record videos at 1920X1080 resolution and 60 fps.)
Battery life
Battery specications

Copyright ⓒ since 1995 Samsung Electronics. All rights reserved. 3-1
Disassembly and Reassembly
Repair Service Part Items to be adjusted Required equipment
General support LCD, Back-Cover, Top - -
Technical expertise
support
LENS Mount, Front-Cover CMOS Tilt
CMOS-Tilt equipment
Shutter speed equipment
Light box (5500K)
Light box (3200K)
ASSY-CMOS CMOS Tilt, AWB etc. (Light box)
Shutter Shutter Speed
MAIN PBA AWB etc. (Light box)
<Table 3-1>
Fig. 3-1
3-1-1 General support - Disassembly
SCREW MACHINE
6001-002152
SCREW MACHINE
6001-002159
1. We provide the general support.
: Samsung Authorized Service Center will provide courteous service on Samsung products
for which they are authorized.
2. We provide the technical expertise support.
: After replacing the parts such as Main PBA, CMOS, Shutter, Mount, it is required to adjust these parts
with the equipment specied below.
For more detail information, refer to chapter 8 Adjustment.
3. Disassembly and reassembly
3-1 Disassembly
1. Remove the 1 screw on the left side, 2 screws on the right side and 5 screws on the bottom side.

3-2 Copyright ⓒ since 1995 Samsung Electronics. All rights reserved.
Disassembly and Reassembly
Fig. 3-3
Fig. 3-2
ASSY BACK
2. Open carefully the locking part to release the ASSY BACK as illustrated in image below.
Then remove it.
3. Remove the FPCB from the connector as illustrated in Fig. A.
Fig. A
1. Open.
FPCB
FPCB
Remove the FPCB from the connector.
2. Remove

Copyright ⓒ since 1995 Samsung Electronics. All rights reserved. 3-3
Disassembly and Reassembly
4. Remove the ASSY BACK.
Fig. 3-4
Fig. 3-5
ASSY BACK
5. Remove the 4 screws.
SCREW MACHINE
6001-002159

3-4 Copyright ⓒ since 1995 Samsung Electronics. All rights reserved.
Disassembly and Reassembly
Fig. 3-6
Fig. 3-7
6. Remove the FPCB that is attached on the FRAME BACK .
7. Remove the ASSY TILT LCD.
FRAME BACK
CAUTION
!
BACK COVER
ASSY TILT LCD
Fig. 1
Fold the upper right corner down as illustrated in Fig. 1 when removing the FPCB from the BACK COVER.

Copyright ⓒ since 1995 Samsung Electronics. All rights reserved. 3-5
Disassembly and Reassembly
Fig. 3-8
Fig. 3-9
8. Remove the screw.
SCREW 1416 MACHINE
6001-003021
9. Insert the tweezers into the hole of screw as illustrated in Fig. 2 and open the LCD Panel.
10. Remove the FPCB as illustrated in Fig. 3.
Fig. 2
LCD Panel
Remove the FPCB.Fig. 3
1. It is installed. 2. Remove.

3-6 Copyright ⓒ since 1995 Samsung Electronics. All rights reserved.
Disassembly and Reassembly
Fig. 3-11
12. Remove the following parts in the order indicated below.
① FRAME BACK
② MAGNET TILT A
①FRAME BACK
②MAGNET TILT A
Fig. 3-10
11. Remove the LCD Panel.
LCD Panel