Samsung TECHWIN SAMS Pro User manual

SAMS Pro
SAMS Pro Lite
User Manual
SSA-M2000
SSA-M2100

Copyright
©2013 Samsung Techwin Co., Ltd. All rights reserved.
Trademark
is the registered logo of Samsung Techwin Co., Ltd.
The name of this product is the registered trademark of Samsung Techwin Co., Ltd.
Other trademarks mentioned in this manual are the registered trademark of their respective company.
Restriction
Samsung Techwin Co., Ltd shall reserve the copyright of this document. Under no circumstances, this document
shall be reproduced, distributed or changed, partially or wholly, without formal authorization of Samsung Techwin.
Disclaimer
Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but
no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the
user’s own responsibility. Samsung Techwin reserves the right to change the contents of this document without
prior notice.
SAMS Pro / SAMS Pro Lite
User Manual

English Englis_ English _3
CONTENTS
SAMS SETUP
6
6System Requirements
6Software Package
6General Installation
14 Running Sams
LOGGING IN SAMS PRO
16
16 Logging In Sams Pro
SCREEN COMPOSITION
17
17 Icons And Descriptions
18 Main Screen
SYSTEM MANAGEMENT
19
19 Device Setting Wizard
23 Building-floor Setting
24 Communication Setting
25 Loop Setting
29 Device And Reader Setting
34 Door Setting
36 Reader/input/output Setting
40 User Accounts Setting
41 User Accounts Group Settin
42 User Accounts Role Setting
43 Setting The Door Access By Users
DEVICE MANAGEMENT
44
44 Initialize Device
45 Device Time Setting
46 Batch Transmit By Device
47 Card Holder Batch Transmit By Device
49 Device Version And Registered No. Of User
50 Master Card Management
Contents
OPERATION MANAGEMENT
53
53 Company Setting
54 Department Setting
54 Title Setting
55 Position Setting
55 Company-department Setting
56 Company-title Setting
57 Company-position Setting
58 Access Type Setting
58 Fire Group Setting
60 Area Setting
62 Confirm Card Has Left The Area [Area Out]
63 Graphic Map Setting
66 Patroller Setting
66 Patrol Setting
67 Patrol Status Management

4_ Contents
Contents
ATTENDANCE
79
79 Closing Hour [Save]
79 Work Code Setting [Save]
80 Overtime Setting
83 Work Time Code Setting
84 Work Schedule Setting
85 Closing Rule Setting
86 Holiday Setting(Attendance)
87 Reader Setting(Attendance) [Add]
87 Daily Closing
88 Monthly Closing
90 Revise Daily Closing
91 Closing Report
92 Setting The Reader (Meal Counting)
[Register]
93 Meal Count Report
ACCESS CONTROL
69
69 Holiday Setting
70 Time Interval Setting
71 Time Schedule
72 Access Group Setting
73 Card Holder Management
VIDEO MONITORING
94
94 Recorder Setup [Register]
97 Camera Settings
99 Camera Mapping
100 Search Video Data [Search & Play]
101 Recorder & Camera Settings Report
102 Live Video
103 Configuring The Live Screen
104 Event Video Screen
104 Configuring The Event Video Search
LIFT
105
105 Lift Setting
107 Lift Output Point Setting
109 Lift Access Group Setting
110 Lift Access Group Report
111 Accessible Floor Report By Card Holder
113 Accessible Floor Report By Lift
CARD DESIGN
115
115 New Card Design Wizard
122 Add Card Design
140 Print Employee Card
143 Setting The Allowed Card Copies
144 Individual Card Report
146 Card Report
MONITORING
148
148 Setting The Instructions

English Englis_ English _5
CONTENTS
TOOLS
149
149 E-mail/sms Server Setting [Save]
151 Recipient Setting
152 Database Backup And Restore
154 Database Backup And Restore (Auto
Management For Event Data)
155 Data Import/export
157 Options
161 Icon Setting [Save]
REPORT
162
162 Device Setting Report
163 Holiday Setting Report
164 Time Schedule Report
166 Access Group Setting Report
167 Card Holder Report
168 Allowed Card Holders By Doors
169 Accessible Door Report By Person
170 Normal Event Report
172 Alarm Report
173 Reader Event Summary
175 Access Event Summary
176 Mustering Report
177 Auditing Log Report
179 Notification Report
180 Login/out Report
182 Patrol Report
183 Visitor Information Report
TROUBLESHOOTING
184
184 Troubleshooting
APPENDIX A.
187
187 Introduction On Sams Pro
188 Understanding Sams Pro
189 Sams Pro Configurations
190 Features
APPENDIX B.
192
192 Install Net Framework 3.5 Sp1 On Windows
Server 2008
APPENDIX C.
193
193 Setting Up The Card Reader For Card
Registration
APPENDIX D.
198
198 Sams Manager

6_ SAMS Setup
SAMS Setup
SYSTEM REQUIREMENTS
Table below shows the hardware and operating system requirements to run SAMS Pro / SAMS Pro Lite.
Hardware / OS Minimum Specifications Recommended Specifications
CPU Intel Core 2 Duo 2.4GHz Intel Core i7
Memory 2GB 4GB
VGA Memory 512MB 1GB
Display 1024 x 768 1280 x 1024
Operating System
Windows XP with SP3
Windows Vista
Windows 2008 Server
Windows 7,8 (Recommended)
※Supports both 32-bit and 64-bit operating systems.
Network 10/100/1000 Ethernet NIC
SOFTWARE PACKAGE
SAMS consists of the following:
- SAMS Pro / SAMS Pro Lite
- SAMS Pro / SAMS Pro Lite USB Keylock Driver
- SSA-X500 Installation
- User Manual
SAMS Pro / SAMS Pro Lite:
Installation files of SAMS Pro / SAMS Pro Lite
SAMS Pro / SAMS Pro Lite USB Keylock Driver:
SAMS is free of charge for controlling less than 40 doors and 1,000 card holders. For bigger capacity, it is
required to purchase a Keylock.
To enable use of Keylock, you need to install the USB Keylock driver on your computer.
SSA-X500 Installation :
To use fingerprint scanner SSA-X500, it is required to install the SSA-X500 USB Driver on your computer.
User Manual :
User manual of SAMS.
GENERAL INSTALLATION
Before starting
SAMS consists of below 6 components.
•
•
•
•
❖

English Englis_ English _7
SAMS SETUP
SAMS Pro / SAMS Pro Lite:
This program provides methods of access control related settings and user interface for handling events.
SAMS Communication Server:
A program that provides communication between access control devices and SAMS Pro / SAMS Pro Lite. Run
this program and find it from the tray icons.
SAMS Database:
All SAMS settings and event information are saved here. Uses SQL Server 2008 R2 Express, and it acts as the
server of SAMS database.
SAMS Visitor Management:
Provides tools for visitor management.
SAMS Integrated Monitoring
A program that provides integrated monitoring of access control events and video
SAMS Manager
A program that provides scheduled task execution for SAMS
(e.g., Scheduled DB backup, Device Time sync. etc.) - refer Appendix D
Installing
Run SAMS Setup file and select preferred language for your installation process. You can select from Korean
and English.
Click “OK” to proceed, and all installation components are uncompressed into a temporary folder. This step may take
several minutes depending on your computer’s performance.
Installation requires certain program components, it shows such installation items as shown below.
Click Install button to proceed installing required items.
•
•
•
•
•
•
1.
J
2.

8_ SAMS Setup
SAMS Setup
Once completed with uncompressing, it displays the installation dialog as shown below.
Installation cannot proceed unless you agree to the terms of use.
If you computer is not installed with Microsoft SQL Server already, below screen appears for SQL Server
installation.
For the Windows Server 2008 operating system, install Microsoft.NET Framework 3.5 SP1 by referring to Appendix
B [Install .NET Framework 3.5 SP1 on Windows Server 2008].
3.
4.
5.
J

English Englis_ English _9
SAMS SETUP
If your computer is not installed with .NET framework 3.5 with SP1, it may require restarting the computer for its
installation. In the case, restart when prompted and continue to install.
The sa logon password may be restricted depending on the security policy of your PC.
Custom installation is recommended only for those accustomed to MS SQL Server 2008 R2 Express.
The SQL Server 2008 R2 Express installation may require several minutes.
When installing the SQL Server 2008 R2 Express, screens shown below appears.
On a certain case, installing SQL Server 2008 R2 Express may fail to finish due to conflicts to existing application
programs installed on the computer. No further support is provided in such occasions. Refer to Microsoft knowledge
base or forums, or try clean installation of the operating system.
For custom installation or installation with existing MS SQL Server products, make sure to select mixed authentication
mode (Windows authentication and SQL Server authentication). SAMS database connection supports SQL Server
authentication only.
For custom installation or installation with existing MS SQL Server products, and if the computer’s operating system is
Windows Vista or Windows 7, make sure to log on as local system for database restore, to avoid security problems.
When installing, set NT AUTHORITY\LOCAL SERVICE of the service or set SQL Server service property to local service
in Control Panel →Administrative Tools →Services.
If failed to install the SQL Server 2008 R2, a warning message appears and the installation aborts.
In such cases, refer to the SQL Server Setup Log shown in the message box to clear the problem and try installation
again.
6.
J
7.
J




10_ SAMS Setup
SAMS Setup
Once completed with database properly, user information settings window appears as below:
Enter the account information.
Select a program to install. Individual program may differ depending on the package.
In general installation, all programs are installed onto one computer.
If selected database from the installable programs, a screen for selecting database server appears as shown below.
In this installation example, the database server name is SAMS and its password is set to samsp&w4321?. Set
as shown below and continue.
8.
9.
J
10.