Samsung SPF-72V User manual

| Safety Symbols | Power | Installation | Using and
Cleaning |
Safety Symbols
Make sure to follow the directions below to prevent accidents and damage to the product.
Failure to follow the accompanying directions may lead to serious injury or death.
Failure to follow the accompanying directions may lead to minor personal injury or property damage.
| Safety Symbols | Power | Installation | Using and
Cleaning |
Power
T
he ima
g
es here are for reference only, and are not applicable in all cases (or countries).
Insert the power plug correctly until it is firmly in place.
zFailing to do so, may cause fire.
Do not use a damaged power plug, cord or outlet, as this may cause electric shock
or fire.
Do not touch the power plug with wet hands, as this may cause electric shock.
Do not connect more than one appliance to a sin
g
le outlet, as an overheated outlet
may cause fire.

Do not use force to pull the power cord. Don't place anything heavy on the power
cord, as this may cause electric shock or fire.
Make sure to turn the power off and disconnect the power plug from the outlet
before moving the product. Make sure to disconnect the connection cables from
other devices as well.
zMoving the product without disconnecting the power cord may damage it while
moving, and may cause electric shock or fire.
Hold and pull out the plug by its body when disconnecting it from the outlet, as
pulling the plug out by the cord may cause it to be damaged.
zFailing to do so, may cause fire, or the product may not turn on normally.
Ensure that the power plug is disconnected before cleaning the product.
zFailing to do so, may cause electric shock or fire.
Keep the product away from places exposed to oil, smoke or moisture; do not
install inside a vehicle.
zThis may cause a malfunction, electric shock or fire.
zIn particular, avoid operating the monitor near water or outdoors where it could be
exposed to snow or rain.
Do not install the product near any heating appliance.
zThere is a risk of fire.
| Safety Symbols | Power | Installation | Using and
Cleaning |
Installation
When installing the product on a cabinet or shelf, do not let the front end of the
product project beyond its front edge.
zFailing to do so, may cause the product to fall, resulting in a product malfunction or
personal injury.

Do not place the power cord near a heater, as the power cord may melt, causing
electric shock or fire.
Do not install the product in a car or a location exposed to oil, smoke, moisture,
water, or rainwater.
zAny contact of these materials with the product may cause electric shock or fire.
Disconnect the power plug when there is thunder or lightning.
zFailing to do so, may cause electric shock or fire.
Place the product down gently when installing it.
zFailing to do so may cause product damage or personal injury.
Avoid dropping the product when moving, as this may cause product damage or
personal injury.
Do not install the product in a location easily reached by children.
zAs the product may fall and cause personal injury.
| Safety Symbols | Power | Installation | Using and
Cleaning |
Using and Cleaning
Do not insert any metal objects such as forks, wire, or gimlets, or flammable items
such as paper or matches into the ports at the back of the product, as this may
cause electric shock or fire.
zIf water or any foreign substance enters the product, make sure to turn the product

off disconnect the power plug from the outlet, and contact a service center.
Never disassemble, repair, or modify the product yourself.
zIf you need to repair your product, contact a service center. An attempt at repairing
this product may cause electric shock or fire.
If you hear a strange sound, smell anything burning, or see smoke, disconnect the
power plug immediately and contact a service center.
zFailing to disconnect the power plug may cause electric shock or fire.
Always remove dust and water from the pins and connections of the power plug.
zFailing to do so may cause electric shock or fire.
When cleaning the product, first disconnect the power plug and clean it with a soft,
dry cloth.
zDo not use any chemicals such as benzene, alcohol, thinners, mosquito repellant,
aromatic, lubricant, detergent or wax.
When not using the product for a long time, make sure to disconnect the power plug.
zHeavy accumulated dust may cause electric shock or fire.
If the product needs to be installed in a location that doesn't satisfy general
conditions, make sure to contact one of our service engineers about the installation
as the product may encounter serious quality problems due to its environment.
zThis refers to locations exposed to conditions such as heavy fine dust, chemicals, high or
low temperature, moisture, or when the product needs to be used continually without a
break over a long time.
If the product has been dropped or the product casing is damaged, turn it off and
disconnect the power plug.
zUsing the product without verifying that it has not been damaged may cause electric
shock or fire. Please contact a service center.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment) - Europe only
(Applicable in the European Union and other European countries with separate
collection systems)

This marking shown on the product or its literature, indicates that it should not be disposed
with other household waste at the end of its working life. To prevent possible harm to the
environment or damage to health from uncontrolled waste disposal, please separate this from
other types of waste and recycle it responsibly to promote the sustainable reuse of material
resources.
Household users should contact either the retailer where they purchased this product, or their
local government office, for details of where and how they can take this item for
environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the
purchase contract. This product should not be mixed with other commercial wastes for
disposal.

| Features | Components | Front | Back | Side
(Buttons) |
Features
Expand the memory capacity with a memory card. Enjoy stored images immediately.
By connectin
g
a SD or MMC/MS memory card of your di
g
ital camera to your di
g
ital photo frame, you can en
j
oy ima
g
es
quickly and easily. This also provides a way to expand the memory capacity of the frame.
Stylish design
With its sleek and clean, high class design, your digital photo frame doubles as an ornament for your desk or table.
A
90 de
g
ree rotatin
g
stand allows both horizontal and vertical installation.
| Features | Components | Front | Back | Side
(Buttons) |
Please check that all components are contained in the delivered package.
If anything is omitted, contact the local distributor where the product was purchased. For optional items, contact a service center.
Never use a power adapter other than the adapter provided with the product.
Components
Digital Photo Frame
(Colors may differ for each product.)
Manual

Quick Start Warranty
(Not available in all locations) User Manual
Cables
Power cord USB cable
(A-B type) Power Adapter
| Features | Components | Front | Back | Side
(Buttons) |
Front
| Features | Components | Front | Back | Side
(Buttons) |
Back

Kensington lock
T
he Kensin
g
ton lock is a device used to physically secure the system when usin
g
it in a
public place. (The locking device has to be purchased separately.)
For using a locking device, please contact where you purchased it.
USB connection
port
Connect a PC or an external device using a USB cable.
Down stream Connect your digital photo frame to a USB-supporting storage
device with a USB cable.
Up stream Connect your digital photo frame to a PC's USB port with a
USB cable.
Make sure to use the USB cable (A-B type) provided with the product when
connecting your digital photo frame to a PC through the upstream port.
Headphone
connection jack
Connect your headphones to the Headphone connection jack.
DC -In Jack
Connect the power adapter to this jack.
Connect the power cord to the power jack of the power adapter.
Stand
A
45, 90 de
g
ree rotatin
g
stand allows both horizontal and vertical installations. If your
digital photo frame is installed vertically, you can rotate your photos using the rotation
function to fit to the vertical installation.
Memory Card Slot
A
llows you to insert an optional memory card.
(Only applicable for SD/MMC/MS card)
Sliding Prevention
Holder
Supports the product so that it stays firmly in place on slippery surfaces.
Speaker
Y
ou can listen to music files and movies.
| Features | Components | Front | Back | Side
(Buttons) |
Side (Buttons)

[]PowerButton
T
urns the product on or off.
Hold down the power button at the right of the product for about 2 seconds.
Power Indicator Shows the power status. When the product is powered on, the power light turns
on.
[MENU] Menu Button Displays the menu window at the bottom left corner of the screen.
[VOL +] Volume Button
A
d
j
usts the sound volume when playin
g
music files or movies.
[]UpButton Used for moving up.
[]LeftButton Used for moving left.
[ ] Right Button Used for moving right.
[VOL +] Volume Button
A
d
j
usts the sound volume when playin
g
music files or movies.
[ ] Down Button Used for moving down.
[ENTER( )] Enter Button Used for selection.
[ ▶ll ] Play / Pause
Button
Play / Pause during playback.
[BACK] Back Button Return to the previous menu.