Samsung DVD-V7500V User manual

DVD-VCR
DVD-V7500
Instruction Manual
PAL
www.samsung.com.au
EJECT
SELECT COPY
REC
PROG
VIDEO
L AUDIO R
OPEN/CLOSE
STANDBY/ON
LINE IN 2
231
564
8
0
97
ANGLE AUDIO

GB
Contents (cont.)
3
GB
Contents
2
◆PLAYING BACK
■Playing a Cassette......................................................................................... 35
■Adjusting Picture Alignment Automatically.................................................... 35
■Adjusting Picture Alignment Manually........................................................... 35
■Selecting the Audio Output Mode.................................................................. 36
■Playing a Cassette in Slow Motion................................................................ 36
■Playing a Sequence Frame by Frame........................................................... 37
■Playing a Sequence at Variable Speeds....................................................... 37
■Picture Search, Fast Forward/Rewind........................................................... 38
■Searching for a Specific Sequence ............................................................... 38
■Using the Tape Counter ................................................................................ 39
■Connecting an RCA Audio/Video Input Cable............................................... 40
■Using the Assemble Edit Function................................................................. 41
■Recording from Another VCR or Camcorder................................................. 41
■Audio Dubbing a Pre-recorded Cassette....................................................... 42
■Using the TV Buttons on the Remote Control ............................................... 43
■SQPB (Super VHS Quasi PlayBack)............................................................ 44
◆DVD FUNCTIONS
■Choosing a Connection................................................................................. 45
■Playing a Disc................................................................................................ 46
■Using the Search & Skip Functions............................................................... 47
■Using the DVD Setup .................................................................................... 48
■Using the Disc Menu Language .................................................................... 49
■Setting Up the Audio Language Features ..................................................... 50
■Using the Subtitle Language ......................................................................... 50
■Setting Up the Parental Control..................................................................... 51
■Setting Up the Audio Options........................................................................ 52
■Setting Up the Display Options...................................................................... 53
■A/V Receiver Connections............................................................................. 54
■Special Playback Features............................................................................ 55
■Using the Display Function (DVD/VCD/CD).................................................. 56
■Repeat Play................................................................................................... 57
■Program Play (DVD/VCD/CD)....................................................................... 58
■Random Play (DVD/VCD/CD)....................................................................... 58
■SCREEN FIT Play......................................................................................... 59
■Digest Play .................................................................................................... 60
■Using the Disc View Function (Track View VCD).......................................... 61
■Using the Disc View Function (Index View VCD).......................................... 61
■Selecting the Audio Language (Using the Audio button)............................... 62
■Selecting the Subtitle Language (Using the Subtitle button)......................... 62
■Changing the Camera Angle......................................................................... 63
■Using the Mark Function (DVD/VCD)............................................................ 64
■Recalling a Marked Scene............................................................................. 64
■Clearing a Mark............................................................................................. 64
■Using the Zoom (DVD/VCD).......................................................................... 65
■3D Sound Function........................................................................................ 65
■MP3 Play....................................................................................................... 66
■MP3 Play (CD-R MP3 disc requirements)..................................................... 67
◆FOREWORD
■Disc Type and Characteristics....................................................................... 6
◆DVD-VCR OVERVIEWS
■Front View of the DVD-VCR.......................................................................... 7
■Rear View of the DVD-VCR........................................................................... 7
■Infrared Remote Control................................................................................ 8
■Display Indicators.......................................................................................... 9
■Accessories................................................................................................... 9
◆CONNECTING YOUR DVD-VCR
■Deciding How to Connect DVD-VCR............................................................. 10
■Connecting DVD-VCR to the TV using the Coaxial Cable ............................ 11
■Connecting DVD-VCR to the TV using the RCA Cable................................. 11
■Connecting Other Equipment to Your DVD-VCR.......................................... 12
■Plug & Auto Set Up........................................................................................ 13
■Tuning Your Television for the DVD-VCR..................................................... 14
■Deck Control Keys......................................................................................... 15
■Copying from DVD to VCR............................................................................ 16
■Inserting Batteries in the Remote Control...................................................... 17
■Setting the Date and Time............................................................................. 17
■Menu Language............................................................................................. 18
◆SETTING UPYOUR DVD-VCR
■Presetting the Stations Automatically............................................................ 19
■Presetting the Stations Manually................................................................... 20
■Clearing a Preset Station............................................................................... 21
■Changing the Preset Station Table................................................................ 22
■Setting the DVD-VCR Output Channel.......................................................... 23
■Selecting the RF OUT (Newzealand Model only).......................................... 23
■Selecting the Colour Mode............................................................................ 24
■NICAM (Newzealand Model only) ................................................................. 24
■Intelligent Picture Control .............................................................................. 25
■Auto Power off............................................................................................... 26
■G-CODE EXTEND......................................................................................... 26
■Selecting the Cassette Type.......................................................................... 27
■Auto Repeat Play........................................................................................... 27
■Displaying/Hiding On-Screen Information ..................................................... 28
◆RECORDING TELEVISION BROADCASTS
■Selecting the Recording Speed..................................................................... 28
■Protecting a Recorded Cassette.................................................................... 29
■Recording a Programme Immediately........................................................... 29
■Recording a Programme with Automatic Stop............................................... 30
■Using the G-CODE Feature........................................................................... 31
■Modifying G-CODE Programming................................................................. 32
■Using the Timer Programming Feature......................................................... 33
■Checking a Preset Recording........................................................................ 34
■Cancelling a Preset Recording...................................................................... 34

GB
Safety Instructions
5
GB
Contents (cont.)
4
The following illustrations represent precautions.
The lightning bolt is a warning sign alerting you to dangerous voltage inside the product.
DO NOT OPEN THE DVD-VCR. Refer to service personnel.
HH
5°C
40°C
10% 75%
THIS DEVICE IS NOT FOR USE IN INDUSTRIAL
ENVIRONMENTS
Do NOT expose the DVD-VCR
to extreme temperature condi-
tions (below 5°C and above
40°C) or to extreme humidity
conditions (less than 10% and
more than 75%).
Do NOT expose the DVD-VCR
to direct sunlight. Do NOT expose the DVD-VCR to any liquids.
Do NOT place any objects on
the DVD-VCR or remote
control.
During a storm and/or light-
ning, unplug the DVD-VCR
from the mains socket and
aerial.
If the remote control is not
used for a long period of time,
remove the batteries and store
it in a cool, dry place.
☛
➢
NoteImportantHold downPress/push
Symbols
11
1
= Step number
◆SOLVING PROBLEMS
■Technical Specifications .............................................................................. 68
■Problems and Solutions (VCR)...................................................................... 69
■Troubleshooting Guide (DVD)....................................................................... 70
This product incorporates copyright protection technology that is protected by
method claims of certain U.S. patents and other intellectual property rights owned
by Macrovision Corpration and other rights owners. Use of this copyright protection
technology must by authorized by Macrovision Corporized by Macrovision
Corporation, and is intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.

GB
Front View of the DVD-VCR
Rear View of the DVD-VCR
7
Disc Type and Characteristics
GB
6
EJECT
SELECT COPY
REC
PROG
VIDEO
L AUDIO R
OPEN/CLOSE
STANDBY/ON
LINE IN 2
VIDEO CASSETTE
COMPARTMENT
PROGRAMME
SELECTION
BUTTONS
PLAY/PAUSE
BUTTON
STOP
BUTTON REW /
SKIP BACK
BUTTON
RECORD
BUTTON
EJECT
BUTTON
F.F /
SKIP NEXT
BUTTON
OPEN/CLOSE
BUTTON DVD/VCR SELECT
BUTTON COPY BUTTON
DVD DECK
STANDBY/ON
BUTTON
LINE IN 2 VIDEO
INPUT JACK LINE IN 2 AUDIO L, R INPUT JACK
This DVD player is capable of playing the following types of discs with the corresponding logos :
* DO NOT play CD-ROM, CD-I and DVD-ROM in this player!
(CDGs play audio only, not graphics.)
~DIGITAL
SOUND
STEREO
•Playback
Region
Number
•PAL colour
system in U.K,
France, Germany,
Austrailia etc.
•Dolby
Digital disc •Digital
Audio disc
•Stereo
disc •DTS disc
Disc Markings
Both the DVD player and the discs are coded by region. These regional codes must match in order for the
disc to play. If the codes do not match, the disc will not play.
The Region Number for this player is described on the rear panel of the player.
Playback Region Number
PAL
12 Cm
8 Cm
Single-sided
240 min.
Double-sided
480 min.
Single-sided
80 min.
Double-sided
160 min.
Audio
+
Video
Audio
+
Video
Audio
•DVD contains excellent sound
and video due to Dolby Digital
and MPEG-2 system.
•Various screen and audio
functions can be easily selected
through the on-screen menu.
•Video with CD sound, VHS
quality & MPEG-1 compression
technology.
•An LP is recorded as an analog
signal with more distortion. CD
is recorded as a Digital Signal
with better audio quality, less
distortion and less deterioration
of audio quality over time.
VIDEO-CD
AUDIO-CD
12 Cm
8 Cm
74 min.
20 min.
12 Cm
8 Cm
74 min.
20 min.
Disc Types
(Logos) Recording
Types Disc Size Max.
Playing
Time Characteristics
DVD
•NTSC broadcast
system in USA,
Canada, japan,
South Korea, etc.
NTSC
1 2 3 4 5 6 7 8 9
1RF ANTENNA INPUT
2RF OUT TO TV
3LINE OUT TO TV (COMPOSITE)
4LINE IN 1
5AUDIO LINE OUT
(S-VIDEO OR COMPONENT)
6COMPONENT VIDEO OUT
7DIGITAL AUDIO OUT(COAXIAL)
8DIGITAL AUDIO OUT(OPTICAL)
9S-VIDEO OUT
DVD & VCR DVD Only

GB
Display Indicators
Accessories
9
Infrared Remote Control
GB
8
You have just purchased a SAMSUNG Video Cassette Recorder (DVD-VCR).
Together with your DVD-VCR, you will find the following accessories in the box.
231
564
8
0
97
ANGLEAUDIO
REMOTE CONTROL
& BATTERIES AUDIO & VIDEO
CABLE
OWNER’S
INSTRUCTIONS
COAXIAL CABLE
TITLE
CHAP STEREO COPY
1 2 3 4 5 6 7
8 9 10 11 12 13
1The DVD Deck is active
2The status of the DVD deck is graphically
displayed
3The number to the right of the “TITLE”symbol is
the current title number
4The time, counter position, time remaining or
current deck status is displayed
5The status of the VCR deck is graphically displayed
6Recording is in progress and blinks when the VCR
is in PAUSE mode
7The VCR Deck is active
83D Sound is active
9A DVD with a DTS soundtrack is loaded
10 The number to the right of the “CHAP”symbol is
the current title number
11 The current TV show or video is broadcast in
Stereo
12 A Timer Recording is programmed or in progress.
13 DVD to VHS copy is in progress
231
564
8
0
97
ANGLE AUDIO
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
1STANDBY/ON
2TV MUTE, ZOOM
30-9
4ANGLE
5VOLUME +/-
6SCREEN FIT, SVHS
7DVD, VCR, TV
8REWIND, SKIP BACK
9STOP
10 DISPLAY
11 CLOCK/COUNTER
12 UP
13 LEFT
14 RECORD
15 SUBTITLE, TIMER
16 TITLE, SPEED
17 3D SOUND
18 OPEN/CLOSE
19 Feature unavailable on this
model
20 AUDIO
21 PROG/TRK
22 INPUT SEL.
A.TRK
23 FAST-FORWARD
SKIP NEXT
24 PLAY/STILL
25 CLEAR
26 DISC MENU
27 RIGHT
28 DOWN
29 RETURN, A.DUB
30 MODE, REPEAT
31 MARK, INDEX
32 DIGEST
33 JOG DIAL
34 SHUTTLE DIAL

GB
Connecting DVD-VCR to the TV using the Coaxial Cable
Connecting DVD-VCR to the TV using the RCA Cable
11
GB
Deciding How to Connect DVD-VCR
10
To receive television programmes a signal must be received from
one of the following sources:
◆An outdoor aerial
◆An indoor aerial
◆A cable television network
◆A satellite receiver
☛Make sure that both the television and the DVD-VCR are
switched off before connecting the cables.
1Remove the aerial or network input cable from the television.
2Connect this cable to the 75Ωcoaxial socket marked on the
rear of your DVD-VCR.
3Plug the coaxial cable supplied into the socket on your
DVD-VCR.
4Plug the other end of the coaxial cable into the connector
previously used for the aerial on the television.
5To obtain better quality pictures and sound on your television, you
can also connect your DVD-VCR to the television via the RCA
cable (see section below) if your television is equipped with this
type of connection.
TV
You can connect your DVD-VCR to the television using the RCA cable if the appropriate input is available
on the television. You thus:
◆Obtain better quality sound and pictures
◆Simplify the setting up procedure of your DVD-VCR
☛◆Regardless of the type of connection chosen, you must always connect the coaxial cable supplied.
Otherwise, no picture will be visible on the screen when the DVD-VCR is switched off.
◆Make sure that both the television and the DVD-VCR are switched off before connecting the cables.
1Connect the coaxial cable as indicated in the above section.
2Connect one end of the RCA Audio/Video cable to the Video output and Audio L, R output socket on the rear
of the DVD-VCR.
3Plug the other end into the appropriate connector on the television.
You must take into account various factors when connecting audio or video systems:
◆Types of connectors available on your systems
◆Systems connected permanently to the DVD-VCR (satellite receiver for example) or
temporarily (camcorder for example)
Your DVD-VCR is equipped with the following connectors.
Connector Location Type Direction Recommended Use
LINE Rear Audio/Video RCA In/Out ◆Television
◆Other VCR
Audio output Rear Audio RCA Out ◆Audio out (DVD only)
COMPONENT Rear RCA Out ◆COMPONENT out (DVD only)
output
S-VIDEO Rear S-JACK Out ◆S-Video out (DVD only)
output
Digital AUDIO Rear Optical Out ◆Digital Audio out (DVD only)
output coaxial
OUT TO TV Rear 75 ΩOut ◆Television
coaxial
IN FROM ANT. Rear 75 ΩIn ◆Aerial
coaxial ◆Cable television network
◆Satellite receiver
☛Whenever you connect an audio or video system to your DVD-VCR, ensure that all elements
are switched off.
Refer to the documentation supplied with your equipment for detailed connection instructions
and associated safety precautions.
DVD & VCR
DVD & VCR
3
2
TV
4
DVD & VCR
Aerial
RF coaxial cable
2
3
TV

GB
Plug & Auto Set Up
13
Connecting Other Equipment to Your DVD-VCR
GB
12
You can connect other audio and/or video equipment to your DVD-VCR in different ways. The following
illustrations give a few examples of the connection possibilities.
➢The RCA input/output connectors on the rear of the DVD-VCR are used for equipment,
such as camcorders, VCRs or sound systems.
REAR OF THE DVD-VCR
Camcorder
VCR
Sound system
Your DVD-VCR will automatically set itself up when it is plugged
into the mains for the first time. TV stations will be stored in
memory. The process takes a few minutes. Your DVD-VCR will
then be ready for use.
1Connect the coaxial cable as indicated on page 11.
(Connecting Your DVD-VCR to the TV Using the Coaxial Cable)
2Plug the DVD-VCR into the mains.
Result: The LANGUAGE SET menu is displayed.
3Select the required language by pressing the " or ❷ buttons.
4Press ENTER to store the language selected.
Result: A message appears.
5Press ENTER to start the auto scanning.
◆The number of stations automatically stored by the DVD-VCR
depends on the number of stations that it has found.
6On completion, press RETURN twice to exit the menu.
➢
◆ Auto preset can be performed by pressing (STOP) on the
DVD-VCR continuously for 5 seconds or more with no tape
inserted.
TV
DVD & VCR
2
AUTO SET UP
PLEASE WAIT
60%
I
■■■■■■■■■■■■ -------I
RETURN

GB
Deck Control Keys
15
Tuning Your Television for the DVD-VCR
GB
14
The DVD-VCR uses one set of controls to operate both decks. The
following keys are helpful in successfully controlling each deck.
1STANDBY/ON Button
Press the STANDBY/ON button on the remote control or front
panel to turn on the DVD-VCR.
2DVD Button
Press the DVD button on the remote control when you want to
control the DVD deck.
◆The DVD indicator will light on the Front Panel Display to show
that the DVD deck is selected.
3VCR Button
Press the VCR button on remote control when you want to control
the VCR deck.
◆The VCR indicator will light on the Front Panel Display to show
that VHS deck is selected.
4DVD-VCR Toggle
Press the SELECT button on the front panel to toggle control
between the DVD deck and the VCR deck.
➢Before using the VCR operation of 19~44 pages, press
the VCR button on the remote control to select VCR
mode.
Before using the DVD operation of 45~67 pages, press
the SELECT button on the remote control to select and
watch DVD.
STANDBY/ON
1
21
1
EJECT
SELECT COPY
REC
R
OG
VIDEO LAUDIO R
LINE IN 2
23
4
You must tune your television for the DVD-VCR only if you are not
using a RCA cable
➢To view pictures from your DVD-VCR when a RCA cable
is used, the television must be set to the audio/video
mode (AV).
1Switch on the television.
2Switch on the DVD-VCR by pressing STANDBY/ON on the front of
the DVD-VCR or STANDBY/ON on the remote control.
3Select a programme position on the television to be reserved for
use with your DVD-VCR.
4Insert the video cassette in the DVD-VCR. Check that the
DVD-VCR starts reading the cassette; if not, press
❿
II
button.
5Start a scan on your television or set the television to UHF
channel 36 (Australia:UHF 38 CH).
6Fine tune the television until the pictures and sound are obtained
clearly.
7If you cannot find the pictures and sound, or there is interference
from nearby channels, it may be necessary to change the setting
of the DVD-VCR output channel (see Setting the DVD-VCR
Output Channel on page 23 and Problems and Solutions on page
69).
8When the picture and sound are perfectly clear, store this channel
at the desired programme position on the television.
Result: That programme is now reserved for use with your
DVD-VCR.
231
4
2

GB
17
GB
16
Inserting Batteries in the Remote Control
Setting the Date and Time
You must insert or replace the batteries in the remote control when
you:
◆Purchase the DVD-VCR
◆Find that the remote control is no longer working
correctly
1Push the tab in the direction of the arrow to release the battery
compartment cover on the rear of the remote control.
2Insert two AA, R6 or equivalent batteries, taking care to respect
the polarities:
◆+ on the battery with + on the remote control
◆–on the battery with –on the remote control
3Replace the cover by aligning it with the base of the remote
control and pushing it back into place.
➢Do not mix different battery types (manganese and
alkaline for example).
Your DVD-VCR contains a 24-hour clock and calendar used to:
◆Automatically stop programme recording
◆Preset your DVD-VCR to record a programme
automatically
You must set the date and time when:
◆You purchase the DVD-VCR
☛◆Do not forget to reset the time when you change
clocks from winter to summer time and vice versa.
1Press SETUP on the remote control.
Result: The MAIN MENU is displayed.
2Press the corresponding " , ❷ or ➛ , ❿ buttons to select the
CLOCK SET option.
3Press the ENTER button to select this option.
Result: The CLOCK SET menu is displayed.
4Press ➛ or ❿ to select the hour, minutes, day, month and year.
Result: The option selected flashes.
5Press the " or ❷ buttons to increase or decrease the value.
Result: The day of the week is displayed automatically.
➢You can hold the " or ❷ buttons down to scroll more
quickly through the values.
6On completion, press RETURN twice to exit the menu.
RETURN
➛!❿!!! "❷
CLOCK SET
12:00 1/JAN/2002
TUE
MAIN MENU
CLOCK SET
RETURN
"❷!! ➛!!!❿ ENTER
Program Clock Install Exit
DVD VCR Option Language
Clock
Copying from DVD to VCR
The DVD-VCR allows you to copy the contents of a DVD to a VHS
tape with a press of the COPY button.
If the DVD you are attempting to copy is copy
protected, you will not be able to copy the disc. It is not
permitted to copy Macrovision® encoded DVDs.
1Insert Disc
Insert the disc you wish to copy in the DVD deck and close the
drawer.
2Insert VHS Tape
Insert a blank VHS videotape into the VCR deck.
3Copy the DVD to VHS Tape
Press the COPY button on the DVD-VCR front panel.
◆The DVD will go into Play mode and the VCR will go into Record
mode.
◆If the DVD disc menu appears, you may need to press the PLAY
button manually to begin copying.
4Stop the Copy Process
When the DVD is finished playing, press the VCR button on the
remote control and then press the STOP button to end the copy.
◆You must stop the Copy process manually when the DVD movie
ends or the DVD may replay and record over and over again.
☛For NTSC DVD or VCD copy
◆Before starting the copy process, set the Quasi PAL to
Off in Display options of DVD SETUP. (see page 53)
◆If Quasi PAL is On, the copy process can not active.
◆The copy is only active PAL tape system.
EJECT
SELECT COPY
REC
PROG
VIDEO
L AUDIO R
OPEN/CLOSE
STANDBY/ON
LINEIN 2
EJECT
SELECT COPY
REC
PROG
VIDEO
L AUDIO R
OPEN/CLOSE
STANDBY/ON
LINEIN 2
EJECT
SELECT COPY
REC
VIDEO LAUDIO R
LINE IN 2
1
2
3
4
4
1

GB
18
Menu Language
1 Open “MAIN MENU”
With the DVD in stop mode, press the SETUP button.
2 Set “Language”
Using the Up/Down and Left/Right buttons, move the selection
arrow to Language set then press ENTER button.
3 Set menu Language
Move the selection bar to your desired Language, then press
ENTER button.
1
LANGUAGE SET
RETURN
"❷! ENTER
MAIN MENU
LANGUAGE SET
RETURN
"❷!! ➛!!!❿ ENTER
Program Clock Install Exit
DVD VCR Option Language
Language
❿ English
Français
Deutsch
Español
Italiano
Nederlands

GB
19
Presetting the Stations Automatically
☛You do not need to preset the stations if you have already
set them automatically (see Plug & Auto Set Up on
page 13).
Your DVD-VCR contains a built-in tuner used to receive television
broadcasts.
You must preset the stations received through the tuner. This can
be done:
◆Plug & Auto Set up (see page 13)
◆Automatically
◆Manually (see page 20)
You can store up to 80 stations.
1Press the SETUP button on the remote control.
Result: The MAIN MENU is displayed.
2Press the corresponding " , ❷ or ➛ , ❿ buttons to select the
INSTALLATION option.
3Press the ENTER button to select this option.
Result:TheINSTALLATION menu is displayed.
4Press the corresponding " or ❷ buttons, until the AUTO SET
UP option is selected.
And then press the ENTER button to select this option.
Result: A message appears, indicating that any channels
already preset on your DVD-VCR will be deleted.
5Press ENTER to start the auto scanning.
Result:◆The PLEASE WAIT indication flashes on the
television screen.
◆The first frequency band is scanned and the first
station found is displayed and stored.
◆The DVD-VCR then searches for the second station
and so on.
◆When the automatic scanning procedure has
finished, the DVD-VCR switches automatically to
programme 1.
➢The number of stations automatically stored by the DVD-
VCR depends on the number of stations that it has found.
6If you wish to cancel the auto scanning before the end, press the
RETURN button three times to exit the menu.
➢◆Once the auto scanning procedure has finished, some
stations may have been stored more than once; select
the stations with the best reception and delete the
ones no longer required (see page 21).
AUTO SET UP
PLEASE WAIT
2%
I--------------------I
RETURN
YOUR DATA WILL BE LOST
PRESS ENTER TO CONTINUE
RETURN TO EXIT
INSTALLATION
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH :CH38
RETURN
"❷!!!!
ENTER
MAIN MENU
INSTALLATION
RETURN
"❷!! ➛!!!❿ ENTER
Program Clock Install Exit
DVD VCR Option Language
Install
VCR
Australia Model
INSTALLATION
AUTO SET UP
MANUAL SET UP
TV SYSTEM :G
VCR OUTPUT CH :CH36
RETURN
"❷!!!!
ENTER
Newzealand Model

GB
21
GB
20
Clearing a Preset Station
If you have stored a TV station:
◆That you do not require
◆At the wrong programme position
you can cancel it.
1Press the SETUP button on the remote control.
2Press the corresponding " , ❷ or ➛ , ❿ buttons to select the
INSTALLATION option.
3Press the ENTER button to select this option.
Result: The INSTALLATION menu is displayed.
4Press the corresponding " or ❷ buttons, until the MANUAL SET
UP option is selected.
5Press the ENTER button to select this option.
Result: The TV STATION TABLE menu is displayed.
6Press the corresponding " or ❷ buttons, until the required preset
TV station is selected. (PR)
7Press the CLEAR button.
8Repeat the same procedure from Step 6onwards until all the
required stations have been cleared.
9On completion, press the RETURN button three times to exit the
menu.
TV STATION TABLE
PR CH NAME
1 003
2
3
4
5
"❷ ❿!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
SWAPPING:ENTER
RETURN DELETE:CLEAR
MAIN MENU
INSTALLATION
RETURN
"❷!! ➛!!!❿ ENTER
Program Clock Install Exit
DVD VCR Option Language
Install
Presetting the Stations Manually
☛You do not need to preset the stations manually if you
have already set them automatically.
1Press the SETUP button on the remote control.
Result: The MAIN MENU is displayed.
2Press the corresponding " , ❷ or ➛ , ❿ buttons to select the
INSTALLATION option.
3Press the ENTER button to select this option.
Result: The INSTALLATION menu is displayed.
4Press the corresponding " or ❷ buttons, until the MANUAL SET
UP option is selected.
5Press the ENTER button to select a MANUAL SET UP option.
Result: The TV STATION TABLE menu is displayed.
6Press the " or ❷ buttons to select a programme number as
required.
7Press the ❿! button to preset the station.
Result: The MANUAL TUNING menu is displayed.
8Press the ➛ or ❿ buttons to start scanning.
Result: The frequency band is scanned and the first station
found is displayed.
9Press the " or ❷ buttons until the NAME is selected.
The station name is set automatically from the broadcast signal.
10 To change the programme’s name, press the ❿! button.
Result: The first letter of the name flashes.
11 To... Then...
Select a character Press the " or ❷ button until the
in the name required character is displayed
(letters, numbers or “-” character).
Move to the next or Press the ❿ or ➛ buttons
previous character respectively.
12 If you... Then...
Wish to store the ◆Press the " or ❷! buttons until the MFT
station displayed is selected.
◆Press the ➛ or ❿ buttons to adjust the
picture, if necessary.
◆Press ENTER to store the station
Do not wish to ◆Press the " or ❷ buttons until the
store the station CH is selected.
displayed ◆Press the
➛ or ❿ buttons to go on
scanning the frequency band and display
the next station
◆Go back to the beginning of Step 12
13 Repeat this procedure from Step 6onwards, until all the required
stations have been stored.
14 On completion, press the RETURN button three times to exit the
menu.
☛You do not need to preset the stations manually if you
have already set them automatically.
TV STATION TABLE
PR CH NAME
1
2
3
4
5
"❷
❿!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
SWAPPING:ENTER
RETURN DELETE:CLEAR
MANUAL TUNING
PR :
CH : ---
MFT : -
NAME : ----
"❷!!! ➛ ❿!!!
MEMORY:ENTER
RETURN
MAIN MENU
INSTALLATION
RETURN
"❷!! ➛!!!❿ ENTER
Program Clock Install Exit
DVD VCR Option Language
Install
VCR VCR
INSTALLATION
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH :CH38
RETURN
"❷!!!!
ENTER
Australia Model
INSTALLATION
AUTO SET UP
MANUAL SET UP
TV SYSTEM :G
VCR OUTPUT CH :CH36
RETURN
"❷!!!!
ENTER
Newzealand Model
INSTALLATION
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH :CH38
RETURN
"❷!!!!
ENTER
Australia Model
INSTALLATION
AUTO SET UP
MANUAL SET UP
TV SYSTEM :G
VCR OUTPUT CH :CH36
RETURN
"❷!!!!
ENTER
Newzealand Model

GB
23
GB
22
Setting the DVD-VCR Output Channel
Your DVD-VCR output channel may need to be changed if the
pictures suffer from interference or if your TV cannot find the
pictures.
Also, you can change the DVD-VCR output channel to adjust the
frequency in which information is displayed on the screen.
1Press SETUP on the remote control.
Result: The MAIN MENU is displayed.
2Press the corresponding " , ❷ or ➛ , ❿ buttons to select the
INSTALLATION option.
3Press the ENTER button to select this option.
Result: The INSTALLATION menu is displayed.
4Press the " or ❷ buttons, until the VCR OUTPUT CH option is
selected.
5Select the required output channel (CH21~CH69) by pressing the
➛ or ❿ buttons (Australia:CH28 ~ CH69).
6On completion, press RETURN twice to exit the menu.
Then tune your television again (see page 14).
MAIN MENU
INSTALLATION
RETURN
"❷!!
➛!!!❿
ENTER
Program Clock Install Exit
DVD VCR Option Language
Install
Changing the Preset Station Table
You can rearrange the Station Table and give different programme
numbers to the stations listed according to your own preferences.
1Press the SETUP button on the remote control.
2Press the corresponding " , ❷ or ➛ , ❿ buttons to select the
INSTALLATION option.
3Press the ENTER button to select this option.
Result: The INSTALLATION menu is displayed.
4Press the corresponding " or ❷ buttons, until the MANUAL SET
UP option is selected.
5Press the ENTER button to select this option.
Result: The TV STATION TABLE menu is displayed.
6Press the corresponding " or ❷ buttons, until the required preset
TV programme is selected.
Result: The selected station is displayed at the same time on
the television screen.
7To change the programme number assigned to a station press the
ENTER button on the remote control (For example; To move a TV
station in programme 1 to programme 3).
8Press the " or ❷ buttons to select required position and the press
ENTER again to swap the position.
9On completion, press the RETURN button three times to exit the
menu.
TV STATION TABLE
PR CH NAME
1 003
2
3
4
5
"❷ ❿!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
SWAPPING:ENTER
RETURN DELETE:CLEAR
TV STATION TABLE
PR CH NAME
1
2
3 003
4
5
"❷ ❿!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
SWAPPING:ENTER
RETURN DELETE:CLEAR
MAIN MENU
INSTALLATION
RETURN
"❷!! ➛!!!❿ ENTER
Program Clock Install Exit
DVD VCR Option Language
Install
VCR
Selecting the RF OUT Sound Mode (B/G-D/K)
(Newzealand Model only)
You can choose the sound mode (B/G or D/K) according to the TV
set connected to your VCR.
1Press SETUP on the remote control.
Result: The MAIN MENU is displayed.
2Press the corresponding " , ❷ or ➛ , ❿ buttons to select the
INSTALLATION option.
3Press the ENTER button to select this option.
Result: The INSTALLATION menu is displayed.
4Press the " or ❷ buttons, until the TV SYSTEM option is
selected.
5 Press the ➛ or ❿ button to select G or K.
6On completion, press RETURN to exit the menu.
VCR
VCR
INSTALLATION
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH :CH38
RETURN
"❷!!!!
ENTER
Australia Model
INSTALLATION
AUTO SET UP
MANUAL SET UP
TV SYSTEM :G
VCR OUTPUT CH :CH36
RETURN
"❷!!!!
ENTER
Newzealand Model
INSTALLATION
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH :CH38
RETURN
"❷!!!!
ENTER
Australia Model
INSTALLATION
AUTO SET UP
MANUAL SET UP
TV SYSTEM :G
VCR OUTPUT CH :CH36
RETURN
"❷!!!!
ENTER
Newzealand Model
INSTALLATION
AUTO SET UP
MANUAL SET UP
TV SYSTEM :G
VCR OUTPUT CH :CH36
RETURN
"❷!!!!
ENTER

GB
25
GB
24
Intelligent Picture Control
The Intelligent Picture Control Feature allows you to adjust the
sharpness of the image automatically, according to your own
preferences.
1During playback, press the SETUP button on the remote control.
Result: The MAIN MENU is displayed.
2Press the corresponding " , ❷! or ➛ , ❿ buttons to select the
USER SET option.
3Press the ENTER button to select this option.
Result: The USER SET menu is displayed.
4Press the corresponding " or ❷ buttons, until the IPC option is
selected.
5Press the ❿! button to select the IPC (intelligent picture control)
option.
➢When intelligent picture control mode is ON, the sharpness
of the image is adjusted automatically.
6To adjust the sharpness manually, press the ❷
button to turn the
IPC mode OFF.
7Press the ➛ or ❿ buttons until the picture is displayed according to
your preferences.
➢If you do not press a button within ten seconds, the
PICTURE menu disappears automatically.
8On completion, press the RETURN button again.
MAIN MENU
USER SET
RETURN
"❷!! ➛!!!❿ ENTER
Program Clock Install Exit
DVD VCR Option Language
Option
USER SET
COLOUR SYSTEM :AUTO
IPC :ON
AUTO POWER OFF :OFF
G-CODE EXTEND :OFF
RETURN
"❷!! ➛!❿
USER SET
COLOUR SYSTEM :AUTO
NICAM :ON
IPC :ON
AUTO POWER OFF :OFF
G-CODE EXTEND :OFF
RETURN
"❷!! ➛!❿
Selecting the Colour Mode
Before recording or playing back a cassette, you can select the
required system standard.
Otherwise, the system automatically selects the reception standard
when you select AUTO.
➢ ◆When playing back a cassette, the standard is
automatically selected by the DVD-VCR.
◆When you playback an NTSC-recorded tape on this DVD-
VCR make a setting on the colour system according to your
TV. If your TV is a PAL system only TV, set NTPB.
If your TV is Multi System TV (NTSC 4.43 compatible), set
NT4.43 and you can record NT4.43.
1Press SETUP on the remote control.
Result: The MAIN MENU is displayed.
2Press the corresponding " , ❷ or ➛ , ❿ buttons to select the
USER SET option.
3Press the ENTER button to select this option.
Result: The USER SET menu is displayed.
4Press the corresponding " or ❷ buttons, until the COLOUR
SYSTEM option is selected.
5Press the ❿ button to select AUTO ➝ PAL ➝ MESECAM ➝ B/W.
AUTO When playing back a cassette, the system standard is
automatically selected by the DVD-VCR.
B/W Black and White
6On completion, press RETURN twice to exit the menu.
USER SET
COLOUR SYSTEM :AUTO
IPC :ON
AUTO POWER OFF :OFF
G-CODE EXTEND :OFF
RETURN
"❷!! ➛!❿
USER SET
COLOUR SYSTEM :AUTO
NICAM :ON
IPC :ON
AUTO POWER OFF :OFF
G-CODE EXTEND :OFF
RETURN
"❷!! ➛!❿
VCRVCR
Australia Model
Newzealand Model
NICAM (Newzealand Model only)
VCR
NICAM programmes are divided into 3 types. NICAM Stereo,
NICAM Mono and Bilingual (transmission in another language).
NICAM programmes are always accompanied by a standard mono
sound broadcast and you can select the desired sound.
Please refer to page 36.
1Press SETUP on the remote control.
Result: The MAIN MENU is displayed.
2Press the corresponding " , ❷ or ➛ , ❿ buttons to select the
USER SET option.
3Press the ENTER button to select this option.
Result: The USER SET menu is displayed.
4Press the corresponding " or ❷ buttons, until the NICAM option
is selected.
5To... Press ➛ or ❿ , until...
Mono mode OFF is displayed.
OFF: Only set at this position to record the
standard mono sound during a
NICAM broadcast if the stereo sound
is distorted due to inferior reception
conditions.
NICAM mode ON is displayed.
ON: Normally set at this position.
6On completion, press RETURN twice to exit the menu.
MAIN MENU
USER SET
RETURN
"❷!! ➛!!!❿ ENTER
Program Clock Install Exit
DVD VCR Option Language
Option
USER SET
COLOUR SYSTEM :AUTO
NICAM :ON
IPC :ON
AUTO POWER OFF :OFF
G-CODE EXTEND :OFF
RETURN
"❷!! ➛!❿
Australia Model
Newzealand Model

GB
27
GB
26
Selecting the Cassette Type
If you wish to use the tape counter to display the time remaining on
a cassette, you must indicate the type of cassette inserted.
1Press SETUP on the remote control.
Result: The MAIN MENU is displayed.
2Press the corresponding " , ❷ or ➛ , ❿ buttons to select the
VCR FUNCTION SETUP option.
3Press the ENTER button to select this option.
4Press the corresponding " or ❷ buttons, until the TAPE
SELECT option is selected.
5Press the ➛ or ❿ buttons as many times as required, until the
correct cassette length is displayed.
E180 E240
E300 E260
6Press RETURN twice to exit the menu.
MAIN MENU
VCR FUNCTION SETUP
RETURN
"❷!! ➛!!!❿ ENTER
Program Clock Install Exit
DVD VCR Option Language
VCR
RETURN "❷!!!!!!!!!
VCR FUNCTION SETUP
Tape Select
➛!!!❿
E180
Repeat Play Off
OSD On
RETURN "❷!!!!!!!!!
VCR FUNCTION SETUP
Tape Select E180
Repeat Play
➛!!❿ Off
OSD On
MAIN MENU
VCR FUNCTION SETUP
RETURN
"❷!! ➛!!!❿ ENTER
Program Clock Install Exit
DVD VCR Option Language
VCR
You can set repeat play to repeat the tape continuously from
beginning to end.
1Press SETUP on the remote control.
Result: The MAIN MENU is displayed.
2Press the corresponding " , ❷ or ➛ , ❿ buttons to select the
VCR FUNCTION SETUP option.
3Press the ENTER button to select this option.
Result: The VCR FUNCTION SETUP menu is displayed.
4Press the corresponding " or ❷ buttons, until the REPEAT
PLAY option is selected.
5To... Press ➛ or ❿ , until...
Repeat play ON is displayed.
Do not wish to repeat play OFF is displayed.
6On completion, press RETURN twice to exit the menu.
Auto Repeat Play
Auto Power Off
The Auto Power Off feature automatically turns off your DVD-VCR
if no signal is received and you do not press any button for the
selected time.
1Press SETUP on the remote control.
Result: The MAIN MENU is displayed.
2Press the corresponding " , ❷ or ➛ , ❿ buttons to select the
USER SET option.
3Press the ENTER button to select this option.
Result: The USER SET menu is displayed.
4Press the corresponding " or ❷ buttons, until the AUTO POWER
OFF option is selected.
5Press the ❿ button, until you select the time of Auto Power off
interval. OFF 2HOUR 3HOUR
6On completion, press RETURN twice to exit the menu.
USER SET
COLOUR SYSTEM :AUTO
IPC :ON
AUTO POWER OFF :OFF
G-CODE EXTEND :OFF
RETURN
"❷!! ➛!❿
USER SET
COLOUR SYSTEM :AUTO
NICAM :ON
IPC :ON
AUTO POWER OFF :OFF
G-CODE EXTEND :OFF
RETURN
"❷!! ➛!❿
VCR VCR
VCR
G-CODE EXTEND
To prevent delays or over-runs the DVD-VCR has a function called
G-CODE EXTEND allowing you to extend the recording time by up
to 60 minutes.
1Press the SETUP button on the remote control.
2Press the corresponding " , ❷ or ➛ , ❿ buttons to select the
USER SET option.
3Press the ENTER button to select this option.
Result: The USER SET menu is displayed.
4Press the corresponding " or ❷ buttons, until the
G-CODE EXTEND option is selected.
5Press ➛ or ❿ buttons to set the G-CODE EXTEND time by
increments of 10 minutes.
6To turn off, press ➛ or ❿ buttons repeatedly until OFF shows.
VCR
USER SET
COLOUR SYSTEM :AUTO
IPC :ON
AUTO POWER OFF :OFF
G-CODE EXTEND :OFF
RETURN
➛!❿!!! "❷
OFF
10
60
USER SET
COLOUR SYSTEM :AUTO
NICAM :ON
IPC :ON
AUTO POWER OFF :OFF
G-CODE EXTEND :OFF
RETURN
➛!❿!!! "❷
OFF
10
60
Australia Model
Newzealand Model
Australia Model
Newzealand Model

GB
29
GB
28
Protecting a Recorded Cassette
Recording a Programme Immediately
Video cassettes have a safety tab to prevent accidental erasure.
When this tab has been removed, you cannot record on the tape.
1If you wish to protect a cassette, break off the tab using a small
screwdriver.
2To re-record over a protected cassette (safety tab broken), cover
the hole with adhesive tape.
Before recording a programme, you must have preset the corres-
ponding station (unless you are recording via an external video
source). If you have not done so, refer to pages 19 and 20.
1Switch on the television.
2To monitor the programme being recorded, select the television
channel reserved for use with your DVD-VCR (or the AV input if
used).
3Insert the cassette on which the programme is to be recorded, with
the window visible and the safety tab intact or the opening covered
with adhesive tape.
Result: The DVD-VCR is switched on automatically.
4Select:
◆ The station to be recorded using the PROG/TRK ( " or ❷ )
buttons
or
◆The LINE source using the INPUT SEL. button for a satellite
tuner or external video source
Result: The station number is displayed and the programme
can be seen on the television.
5Select the recording speed by pressing the SPEED button as
many times as required (see page 28).
6Hold REC (
●
) down for a while to start recording.
Result:
The record indicator appears on the television and DVD-
VCR display. An index is recorded on the tape (see page
38).
7To stop recording, press
■
once.
➢◆If your DVD-VCR ejects the cassette when you start
recording, check to make sure that the cassette’s
safety tab is intact or that the opening (created by a
broken safety tab) is covered with adhesive tape.
◆If you reach the end of the tape while recording, the
cassette rewinds automatically.
1
7
0
ANGLE AUDIO
6
4
4
5
Displaying/Hiding On-Screen Information
Selecting the Recording Speed
Your DVD-VCR displays most information both on the DVD-VCR
and the television.
You can choose to display or hide this information on the television
screen (except for the Index, MAIN MENU and
Timer functions, which cannot be hidden).
1Press SETUP on the remote control.
Result: The MAIN MENU is displayed.
2Press the corresponding " , ❷ or ➛ , ❿ buttons to select the
VCR FUNCTION SETUP option.
3Press the ENTER button to select this option.
Result: The VCR FUNCTION SETUP menu is displayed.
4Press the corresponding " or ❷ buttons, until the OSD option is
selected.
5To... Press ➛ or ❿ , until...
Display on-screen information ON is displayed.
Hide on-screen information OFF is displayed.
6On completion, press RETURN twice to exit the menu.
You can record a cassette at two different speeds:
◆SP (Standard Play)
◆LP (Long Play)
In Long Play modes:
◆Each cassette lasts twice as long
◆The recording is of a slightly lower quality
To record a cassette... Press the SPEED button on the
remote control, until...
In standard play mode SP is displayed.
In long play mode LP is displayed.
Type Recording Time (in SP)
E-180 180 mins. or 3 hours
E-240 240 mins. or 4 hours
E-260 260 mins. or
4 hours and 20 mins.
E-300 300 mins. or 5 hours
RETURN "❷!!!!!!!!!
VCR FUNCTION SETUP
Tape Select E180
Repeat Play Off
OSD
➛!!❿ On
MAIN MENU
VCR FUNCTION SETUP
RETURN
"❷!! ➛!!!❿ ENTER
Program Clock Install Exit
DVD VCR Option Language
VCR
VCR
VCR
VCR
VCR

GB
31
GB
30
Recording a Programme with Automatic Stop
This function enables you to record up to nine hours (LP) of
programmes.
Your DVD-VCR stops automatically after the requested length of
time.
1Switch on the television.
2To monitor the programme being recorded, select the television
channel reserved for use with your DVD-VCR (or the AV input if
used).
3Insert the cassette on which the programme is to be recorded,
with the window visible and the safety tab intact or the opening
covered with adhesive tape.
Result: The DVD-VCR is switched on automatically.
4Select:
◆ The station to be recorded using the PROG/TRK ( " or ❷ )
buttons
or
◆The LINE source using the INPUT SEL. button for a satellite
tuner or external video source
Result: The channel number is displayed and the programme
can be seen on the television.
5Select the recording speed by pressing the SPEED button as
many times as required (see page 28).
6Hold the REC button (
●
) down for a while to start recording.
Result: The record indicator appears on the television screen
and DVD-VCR display. An index is recorded on the
tape (see page 38).
7Press the REC button (
●
) several times to increase the recording
time in:
◆30-minute intervals up to four hours
◆1-hour intervals up to nine hours (LP)
Result: The length is displayed on the television displays. The
selected programme is recorded for the length of time
requested. At the end of that time, the DVD-VCR stops
recording automatically.
8If you wish to cancel the recording before the end, press
STANDBY/ON.
☛If the end of the tape is reached while recording:
◆The recording stops
EJECT
SELECT COPY
REC
PROG
VIDEO
L AUDIO R
OPEN/CLOSE
STANDBY/ON
LINEIN 2
3
0
ANGLE AUDIO
4
4
6
5
VCR
Before presetting your DVD-VCR:
◆Switch on both the television and your DVD-VCR
◆Check that the date and time are correct
◆Insert the cassette on which the programme is to be
recorded (safety tab intact)
Up to six programmes can be preset.
1Press the TIMER button.
Result: The TIMER METHOD is displayed.
2Press the corresponding " or ❷ buttons, until the G-CODE option
is selected.
3Press the ❿! button to select G-CODE.
Result: A message is displayed to allow you to enter the
G-CODE code.
☛If all six programmes have been set, the message TIMER
IS FULL is displayed. Refer to page 34 if you wish to
cancel a preset recording.
4Press the numeric buttons to enter the code opposite the pro
gramme that you wish to record in your television magazine.
➢If you wish to correct the G-CODE code that you are
entering:
◆Press the ➛ button until the digit to be corrected is
cleared
◆Enter the correct digit
5Press the ENTER button.
Result:
The information concerning the programme is displayed.
☛When using the G-CODE function for the first time with
stored stations, the programme number flashes. This one
time, you must enter the station number manually by
pressing the
" or ❷ buttons. Refer to the following page if:
◆The programme number or times flash
◆You wish to modify the programme
6If the programme and times are correct, press the RETURN button.
7Press the STANDBY/ON button to activate the timer.
8Refer to page 34 if you wish to:
◆Check that your VCR has been programmed correctly
◆Cancel a preset recording
☛The numbers next to each TV programme listing are
G-CODE code numbers, which allow you to programme
your videorecorder instantly with the remote control. Tap
in the G-CODE code for the programme you wish to
record.
™G-CODE is a trademark of Gemstar Development Corporation. The G-CODE system is
manufactured under licence from Gemstar Development Corporation.
Using the G-CODE Feature
VCR
231
564
7
G-CODE
CODE ---------
CODE:0-9 CORRECT:
➛
RETURN ENTER
1/JAN TUE 12:09
PR DAY START → STOP
-- ---- --:-- → --:----
-- ---- --:-- → --:----
-- ---- --:-- → --:----
-- ---- --:--
→ --:----
-- ---- --:-- → --:----
-- ---- --:-- → --:----
"❷ SET: ❿
RETURN DELETE:CLEAR
1
TIMER METHOD
STANDARD
G-CODE
RETURN
"❷ ENTER
LENGTH 2:30
SET LENGTH :
PRESS REC ●

GB
32
GB
33
Using the Timer Programming Feature
The Timer Programming feature allows you to preset the DVD-VCR
to record a programme up to one month before that programme is
to be broadcast. Up to six programmes can be preset.
☛Before presetting a recording, check that the date and
time are correct.
1Insert the cassette and press TIMER on the remote control.
Result: The timer method is displayed.
2Press the ENTER button to select STANDARD option.
Result: The TIMER PROGRAMMING menu is displayed.
3Press ❿! to select the input source.
4Select the required station by pressing the " , ❷ buttons.
5Press ❿ to select the recording day.
6Select the required day by pressing the " or ❷ buttons.
7Press ❿ to select the recording start time.
8Select the required hour value by pressing the " or ❷ buttons.
9Press ❿ to select the minutes.
10 Select the required minute value by pressing the " or ❷ buttons.
11 Press ❿ to select the recording stop time.
12 Select the required recording stop time by pressing the " or ❷
buttons, following the same procedure as when selecting the
recording start time.
13 Press ❿ to select the recording speed.
14 Press the " or ❷ buttons to select the SP (Standard Play), LP
(Long Play), AUTO (Auto Tape Speed Select) recording speeds.
15 When you have finished, press the RETURN button.
16 Press the STANDBY/ON button to activate the timer.
Result: Before starting recording, the DVD-VCR compares the
timer duration with the remaining time on the cassette.
➢Auto Tape Speed Select. The DVD-VCR’s “Auto Tape
Speed Select” function compares the duration of the timer
recording to the actual recording time remaining on the
tape loaded. If there is insufficient tape to complete a
timer recording in AUTO mode, the DVD-VCR
automatically switches to LP mode to record the whole
programme.
231
564
16
1/JAN TUE 12:09
PR DAY START → STOP
1 SA 9 12:00 → 12:50SP
-- ---- --:-- → --:----
-- ---- --:-- → --:----
-- ---- --:-- → --:----
-- ---- --:-- → --:----
-- ---- --:-- → --:----
"❷ ➛❿ SET: ❿
RETURN DELETE:CLEAR
VCR
Modifying G-CODE Programming
VCR
If you wish to correct the programme displayed or modify certain elements, such as the recording
speed, you can do so before you press SETUP a second time to confirm.
If you wish to... Then...
Select an input source other ◆Press the ➛ or ❿ buttons, until the PR selection flashes.
than the tuner (LINE IN 1 or LINE IN 2) ◆Press the INPUT SEL. button one or more times to change the
input source selection.
Result: The programme number is replaced by:
•The LINE IN 1 or LINE IN 2 source using the
INPUT SEL. button for a satellite tuner or
external video source
➢The input source must be selected before changing any
other value.
Record a programme every day ◆Press the ➛ or ❿ buttons, until the DAY selection flashes.
(Monday to Sunday) at the same time ◆Press the
" or ❷ buttons, until the DLY (Daily) value is
displayed.
Record a programme every week ◆Press the ➛ or ❿ buttons, until the DAY selection flashes.
on the same day and at the same time ◆Press the
" or ❷ buttons, until the W- (Week) value is
displayed, followed by the required day.
Example:W-SA (Weekly Saturday)
Extend the recording time ◆Press the ➛ or ❿ buttons, until the STOP selection flashes.
◆Press the " or ❷ buttons to increase or decrease the stop
time.
Select the recording speed ◆Press the ➛ or ❿ buttons, until the recording speed selection
flashes.
◆Press the " or ❷ buttons until the correct indication is
displayed:
•AUTO (Auto Tape Speed Select) : see page 33
•SP (Standard Play)
•LP (Long Play)
TIMER METHOD
STANDARD
G-CODE
RETURN
"❷ ENTER

GB
35
GB
34
Playing a Cassette
Adjusting Picture Alignment Automatically
Adjusting Picture Alignment Manually
This function allows you to play back any pre-recorded cassette.
1Switch on both the television and your DVD-VCR.
2Insert the video cassette to be played. If the safety tab on the
cassette is intact, press
❿ll .
Otherwise, the cassette is played automatically.
➢When a cassette is loaded, the tape position is optimized
automatically to reduce disturbance (Digital Auto Tracking).
When playing a cassette, if the end of the tape is reached,
the cassette is rewound automatically.
NTSC tapes can be played back but cannot be recorded
with this DVD-VCR.
3To... Then press...
Stop the playback
■
(STOP).
Eject the cassette (EJECT).
The Picture Alignment feature enables you to optimize the tape
position automatically to obtain the best possible picture.
When noise bars or streaks appear during playback, adjust picture
alignment by pressing the A.TRK button.
Result:◆The tracking bar appears.
◆The picture is automatically adjusted.
◆The tracking bar disappears when digital auto tracking has
been completed.
The Picture Adjustment feature allows you to adjust the alignment
manually to obtain the best possible picture.
When noise bars or streaks appear during playback, adjust alignment
manually by pressing the PROG/TRK (
" or ❷ ) buttons until the picture is
clear and stable.
Result:◆The tracking bar appears.
◆The image is adjusted.
◆The tracking bar disappears when you release the button.
EJECT
SELECT COPY
REC
LINE IN 2
32
3
0
ANGLE AUDIO
0
ANGLE AUDIO
Checking a Preset Recording
Cancelling a Preset Programme
You can check your preset recordings:
◆When you have finished presetting the DVD-VCR
◆If you have forgotten which programmes will be
recorded
1Press TIMER on the remote control.
Result: The timer method is displayed.
2Press the ENTER button to select STANDARD option.
Result: The TIMER PROGRAMMING menu is displayed.
3Press the " or ❷ buttons to select the required programme.
4Press the ➛ or ❿ buttons to select and change any values as
required. For more details, refer to the previous page.
5On completion, press RETURN twice.
You can cancel any programmes that are:
◆Incorrect
◆No longer required
1Press TIMER on the remote control.
Result: The timer method is displayed.
2Press the ENTER button to select STANDARD option.
Result: The TIMER PROGRAMMING menu is displayed.
3Select the programme to be cancelled by pressing the " or ❷!
buttons.
4Press the CLEAR button to cancel the selected programme.
Result: All the recording information is deleted and the broad-
cast will not be recorded.
5On completion, press RETURN twice.
1/JAN TUE 12:09
PR DAY START → STOP
1 SA 9 12:00 → 12:50SP
-- ---- --:-- → --:----
-- ---- --:-- → --:----
-- ---- --:-- → --:----
-- ---- --:-- → --:----
-- ---- --:-- → --:----
"❷ ➛❿
RETURN DELETE:CLEAR
1/JAN TUE 12:09
PR DAY START → STOP
1 SA 9 12:00 → 12:50SP
-- ---- --:-- → --:----
-- ---- --:-- → --:----
-- ---- --:-- → --:----
-- ---- --:-- → --:----
-- ---- --:-- → --:----
"❷ ➛❿
RETURN DELETE:CLEAR
4
VCR
VCR
VCR
VCR
VCR

GB
37
GB
36
Playing a Sequence at Variable Speeds
You can vary the playback speed using the Shuttle function (up to
nine times the normal speed).
Example: You wish to analyze a sportsperson’s technique,
movement by movement.
The Shuttle function is available on the Remote control
➢No sound is heard when playing a sequence at variable
speeds.
1Press:
◆ ❿ll during playback
◆Turn the SHUTTLE dial to left to play the cassette backwards.
◆Turn the SHUTTLE dial to right to play the cassette forwards.
2The speed is changed as shown in the following illustration.
1
11
REVERSE REVERSE REVERSE SLOW SLOW PLAY PLAY PLAY
PLAY PLAY PLAY STILL MOTION MOTION PLAY X3 X5 X9
X9 X5 X3 X1/10 X1/5
Selecting the Audio Output Mode
Playing a Cassette in Slow Motion
You can select the mode in which the sound is reproduced on the
loudspeakers and AV outputs. The following options are available.
Option Description
L Used to listen to the sound on the left Hi-Fi channel.
R Used to listen to the sound on the right Hi-Fi channel.
MIX Used to listen to the mixed sound of the Hi-Fi and normal
channels.
MONO Used to listen to the sound on the normal mono channel.
L R Used to listen to Hi-Fi stereo sound on the left and right
channels.
➢When playing back tapes recorded in Hi-Fi, the
sound switches to Hi-Fi after five seconds of Mono.
To select the sound mode, simply press the AUDIO button on the remote
control until the required option is displayed.
You can play a cassette in slow motion.
➢No sound is heard when playing back a cassette in slow
motion.
1Press:
◆ ❿ll to start playing the cassette
◆ ❿ll button one more time to make STILL mode.
◆ ❿❿ to start SLOW mode.
◆ ❿❿
or
➛➛ button as many times as required to decrease or
increase the speed respectively
◆To return to the normal speed, press the ❿ll
button twice.
2When playing back in slow motion, picture interference may occur.
Press the PROG/TRK (
" or ❷ ) buttons to minimize this effect.
☛When you have been using the Slow Motion function for
more than about five minutes, the DVD-VCR will
automatically play to protect the:
◆Cassette
◆Video heads
8
0
97
ANGLE AUDIO
L R MIX
L R MONO
0
ANGLE AUDIO
2
2
1
1
Playing a Sequence Frame by Frame
You can:
◆Stop the cassette at a given frame (image)
◆Advance one frame at a time
➢No sound is heard when playing back frame by frame.
1Press:
◆ ❿ll to start playing the cassette
◆ ❿ll to still the tape at a given frame
◆Turn the JOG Dial to advance frame by frame
2To return to normal playback, press ❿ll .
☛When you have been using the Frame-by-Frame function
for more than about five minutes, the DVD-VCR will
automatically play to protect the cassette and video
heads.
➢Vertical stability: When playing back frame by frame,
interference may be seen on the screen. Press the
PROG/TRK buttons to minimize this effect.
VCR
VCR
VCR
VCR