English - 8
Placing Your Television in Standby Mode¦
Your set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful when you
wish to interrupt viewing temporarily (during a meal, for example).
1. POWER
P
button on the remote control.
The screen is turned off and a standby indicator appears on your set.N
2. POWER
P
button again.
Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example). It is best toN
unplug the set from the mains and aerial.
Plug & Play Feature¦
1. POWER button on the remote control. The message You can set the menu
language. is displayed.
2. ENTER
E
3. Store Demo or Home Use, then the ENTER
E
button.
NHome Use mode for the best picture in your home environment.
Store DemoNmode is only intended for use in retail environments.
If the unit is accidentally set toNStore Demo mode and you want to return to Home Use (Standard
MENU button on the TV for 5 seconds.
4. ENTER
E
ENTER
E
button to
5. Air or Cable, then press the ENTER
E
button.
Air: AirNantenna signal.
Cable: Cable antenna signal.
6. ENTER
E
button to select Start.
Digital & AnalogueN
Digital
Analogue
NCable, a step appears allowing you to set a value for the digital channel search. For
more information, refer to Channel→AutoStore.
The channel search will start and end automatically.N
NENTER
E
button at any time to interrupt the memorization process.
After all the available channels are stored, the messageNSet the Clock Mode. is displayed.
7. ENTER
E
AutoENTER
E
button.
If you selectNManual, Set current date and time is displayed.
If you have received a digital signal, the time will be set automatically. If not, selectNManual
20)
8. ENTER
E
button.
9. The message Enjoy your TV!ENTER
E
button.
If you want to reset this feature...
1. MENUSetup, then press the ENTER
E
button.
2. ENTER
E
button again to select Plug & Play.
3. 0-0-0-0.
NChange PIN function. (refer to page 22)
TheNPlug & Play feature is only available in the TV mode.
Plug & Play
You can set the menu language.
E
Enter
BN68-03043A.indb 8 2010-04-14 �� 4:56:26
