Samsung LW15B13C User manual

WIRELESS
LCD TV
LW15B13C
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
WIRELESS LAN
POWER SAVING
TELETEXT
MONTE(BN68-00625A-01)_UK 4/20/04 08:23 PM Page 1

MONTE(BN68-00625A-01)_UK 4/20/04 08:23 PM Page 2

English-3
Contents
◆CONNECTING AND PREPARING YOUR TELEVISION
■View of Your Television ................................................................................ 5
■Notes on Base Station Installation................................................................. 7
■How to Install the Base Station...................................................................... 8
■Adjusting the Client Angle ............................................................................. 8
■Infrared Remote Control ................................................................................ 9
■Inserting the Batteries in the Remote Control................................................ 10
■Connecting to an Aerial or Cable Television Network ................................... 10
■Switching Your Television On and Off........................................................... 11
■Placing Your Television in Standby Mode..................................................... 12
■Becoming Familiar with the Remote Control ................................................. 13
■Plug & Play Feature....................................................................................... 14
■Choosing Your Language.............................................................................. 15
◆SETTING THE CHANNELS
■Storing Channels Automatically..................................................................... 16
■Sorting the Stored Channels ......................................................................... 17
■Storing Channels Manually............................................................................ 18
■Skipping Unwanted Channels ....................................................................... 20
■Assigning Names to Channels ...................................................................... 21
■Fine Tuning Channel Reception.................................................................... 22
◆USING YOUR TELEVISION
■Changing the Picture Standard ..................................................................... 23
■Adjusting the Picture Settings........................................................................ 24
■Changing the Colour Tone ............................................................................ 24
■Selecting the Picture Size.............................................................................. 25
■Setting the Blue Screen................................................................................. 25
■Freezing the Current Picture ......................................................................... 26
■Changing the Sound Standard ...................................................................... 26
■Selecting the Auto Volume ............................................................................ 27
■Selecting the Sound Mode ............................................................................ 28
■Setting and Displaying the Current Time....................................................... 29
■Setting the Sleep Timer ................................................................................. 30
■Switching the Television On and Off Automatically ....................................... 31
MONTE(BN68-00625A-01)_UK 4/20/04 08:23 PM Page 3

English-4
Contents (continued)
◆USING YOUR TELEVISION (continued)
■Selecting the Power Saving........................................................................... 32
■Displaying Information ................................................................................... 32
■Setting the Wireless LAN............................................................................... 33
◆USING THE TELETEXT FEATURE
■Teletext Feature ............................................................................................ 34
■Displaying the Teletext Information ............................................................... 34
■Selecting a Page by Number......................................................................... 35
■Using FLOF to Select a Page........................................................................ 36
■Storing Teletext Pages .................................................................................. 36
◆ADDITIONAL INFORMATION ON CONNECTIONS
■Viewing an External Signal Source ............................................................... 37
■Connecting to the External Input/Outputs...................................................... 38
■DC Input Jack Power Cable .......................................................................... 38
■Connecting to the RCA Input......................................................................... 39
■Connecting to the S-Video Input.................................................................... 39
■Connecting Headphones............................................................................... 40
■Connecting to the IR Relay............................................................................ 40
■Connecting the Power Adapter and Recharging the Battery Pack................ 41
■Using the Battery Pack .................................................................................. 42
■Cautions on Storing and Using the Battery Pack .......................................... 42
◆RECOMMENDATIONS FOR USE
■SCART Connector Wiring (EXT1, EXT2 or EXT3) ........................................ 43
■Troubleshooting: Before Contacting Service Personnel................................ 44
■Technical and Environmental Specifications ................................................. 45
☛➢
Press Important Note
Symbols
MONTE(BN68-00625A-01)_UK 4/20/04 08:23 PM Page 4

English-5
View of Your Television
Control Panels
1) Power On/Off
2) Channel Selection
3) Volume Adjustment
4) Menu Display
5) Input Source Selection
6) Remote Control Sensor
7) Standby Indicator
8) Wireless Signal Indicator
1
1
8
45 2
3
6
7
Using the Buttons on the Panel
➢Using the Buttons on the Panel
If the remote control no longer works or you have lost it, you can use controls on the
panel of the LCD TV to:
◆Switch on the TV when it is in Standby mode, select channels and select items
on the on-screen menu. ( C/P. )
◆Access the main menu. ( MENU )
◆Adjust the volume and select items on the on-screen menu. (-+)
◆Switch among Video input modes and change confirmation in the menu.
( SOURCE )
➢Indicator
◆Standby Indicator(Client) Standby mode : Amber
Standby + On Timer mode: Green
POWER ON : None
The Standby Indicator will flash while the battery
is recharging. The Standby Indicator will remain
lit when the battery is fully charged.
◆Wireless Signal Indicator Successful Connection: Green
Unsuccessful Connection: Amber
MONTE(BN68-00625A-01)_UK 4/20/04 08:23 PM Page 5

English-6
View of Your Television (continued)
Connection Panels
Checking Parts
Side of the Client
SCART Audio/
Video Input/Output
S-Video Input
IR RELAY
Audio/Video Input
75ΩCoaxial Connector
for Aerial/Cable/Satellte
Network
DC Input
Rear of the Base Station
DC Input
S-Video InputAudio Input
Video Input
➢For further details about connection, refer to pages 38~41.
☛Whenever you connect an audio or video system to your television, ensure that all
elements are switched off.
Refer to the documentation supplied with your equipment for detailed connection
instructions and associated safety precautions.
Headphone
connector
Owner’s
Instructions
Base Station ClientRemote Control/
AAA Batteries
Battery
Power Cord:2EAIR Relay Adapter: 2EA
➢Base Station has the same function as an adaptor for clients.
Rear of the Client
MONTE(BN68-00625A-01)_UK 4/20/04 08:23 PM Page 6

English-7
Notes on Base Station Installation
◆The wireless signal is transmitted/received from the front and back of the Base Station using
an internal antenna.
◆Depending on the installation location of the Base Station and the Client, the Video signal
may be unstable if the communication conditions are unstable.
◆Note on Wireless Communication and the Internal Antenna of the Base Station
- Weak communication levels might be found in the central area of both sides of the Base
Station and their extension lines.
◆To Ensure Optimum Wireless Conditions
- Do not place metal objects, CDs, DVDs, or any metallic components near the Base
Station.
- Set the Base Station and Client apart from other connecting devices in order to clear the
wireless communication area.
- Avoid installation near a water tank, bathtub, and crowded areas.
- Avoid installation near metal framework, furniture, or any other metal objects.
- Do not use other wireless devices that are not required.
◆Checking Wireless Communication Levels & Signals
- You can check the communication level on the Client.
- Press the INFO button on your remote control. Signal Strength is displayed. The longer the
Signal Strength Bar, the better the communication level.
- When the Wireless Signal Indicator on the Base Station is Amber, the communication has
been cut. A Green light indicates successful communication.
- Change the Bit Rate Setting and the Channel Setting if the communication level is low or
unstable communication occurs (refer to page 33).
➢The communication level is refreshed when the Base Station or the Client is moved.
MONTE(BN68-00625A-01)_UK 4/20/04 08:23 PM Page 7

English-8
How to Install the Base Station
◆The Base Station can be installed vertically or horizontally to best fit the installation location.
Attach or detach the Stand to/from the Base Station using the screws on the bottom of the
Base Station.
◆Do not use screws other than those provided. Save the screws for future use if you remove.
◆Do not place the Base Station on top of other devices. Do not stack other devices on top of
the Base Station. Keep the ventilation holes open.
Adjusting the Client Angle
◆The Client angle can be adjusted (back 15
°°
).
◆While adjusting the client angle, hold on to the stand so that it
does not move or lift up.
➢Tilting more than 15 degrees might cause a fall, results in damage to the product.
MONTE(BN68-00625A-01)_UK 4/20/04 08:23 PM Page 8

English-9
Infrared Remote Control
➢The performance of the remote control may be affected by bright light.
TELEVISION STAND-BY
DIRECT CHANNEL SELECTION
VOLUME INCREASE
TEMPORARY SOUND SWITCH-OFF
MENU DISPLAY/
PROGRAMME SELECTION BY NAME
TUNER/CABLE NETWORK
SELECTION
MOVE TO THE REQUIRED
MENU OPTION/
ADJUST AN OPTION
VALUE RESPECTIVELY
EXTERNAL INPUT SELECTION/
TELETEXT MODE SELECTION
(LIST/FLOF)
SOUND STANDARD
EXIT FROM ANY DISPLAY
PREVIOUS CHANNEL/
TELETEXT PREVIOUS PAGE
CHANGE CONFIRMATION
INFORMATION DISPLAY/
TELETEXT REVEAL
PICTURE SIZE/
TELETEXT SIZE SELECTION
PICTURE STANDARD
ONE/TWO-DIGIT CHANNEL
SELECTION/TELETEXT PAGE HOLD
SWITCH REPEATEDLY
BETWEEN THE LAST TWO
CHANNELS DISPLAYED
AUTOMATIC SWITCH-OFF/
TELETEXT STORE
VOLUME DECREASE
NEXT CHANNEL/
TELETEXT NEXT PAGE
TELETEXT DISPLAY/
MIX BOTH TELETEXT INFORMATION
AND THE NORMAL BROADCAST
FASTEXT TOPIC SELECTION
SOUND MODE SELECTION/
TELETEXT SUB-PAGE
POWER SAVE STILL PICTURE/
TELETEXT CANCEL
MONTE(BN68-00625A-01)_UK 4/20/04 08:23 PM Page 9

English-10
You must insert or replace the batteries in the remote control when
you:
◆Purchase the LCD TV
◆Find that the remote control is no longer operating
correctly
1Remove the cover on the rear of the remote control by pressing
the symbol ( ) downwards and then pulling firmly to remove it.
2Insert two R03, UM4, “AAA”1.5V or equivalent batteries taking
care to respect the polarities:
◆ - on the battery against - on the remote control
◆ + on the battery against + on the remote control
3Replace the cover by aligning it with the base of the remote
control and pressing it back into place.
To view television channels correctly, a signal must be received by
the set from one of the following sources:
◆An outdoor aerial
◆A cable television network
◆A satellite network
1In the first three cases, connect the aerial or network input cable to
the 75Ωcoaxial socket on the rear of the Base Station.
2If you are using an indoor aerial, you may need to turn it when
tuning your Base Station until you obtain a picture that is both
sharp and clear.
For further details, refer to:
◆“Storing Channels Automatically ”on page 16
◆“Storing Channels Manually”on page 18
Inserting the Batteries in the Remote Control
Connecting to an Aerial or Cable Television Network
Rear of the
Base Station
Cable Television
Network
or
MONTE(BN68-00625A-01)_UK 4/20/04 08:23 PM Page 10

English-11
Switching Your Television On and Off
The mains lead is attached to the rear of your Base Station.
1Plug the mains lead into an appropriate socket.
➢
The main voltage is indicated on the rear of the Client/ Base
Station and the frequency is 50 or 60Hz.
2Press the “”button (On/Off) on the Base Station.
3Press the “”button (On/Off) on the top panel of the Client or
remote control.
Result: After pressing the POWER ( ) button, it takes about
15 seconds to secure the wireless connection and for
the picture to appear. The Wireless Signal Indicator
Lamp on the Base Station changes from Amber to
Green.
➢If you have not yet stored any channels, No clear picture
appears. Refer to “Storing Channels Automatically”on page
16 or “Storing Channels Manually”on page 18.
4To switch your Client/Base Station off, press the “”button
(On/Off) again.
MONTE(BN68-00625A-01)_UK 4/20/04 08:23 PM Page 11

English-12
Placing Your Television in Standby Mode
Your television can be placed in Standby mode, in order to reduce:
◆Power consumption
The Standby mode can be useful when you wish to interrupt
viewing temporarily (during a meal, for example).
1Press the POWER ( ) button on the remote control.
Result: The screen is turned off and the Standby indicator on
the front of the client lights up.
2To switch the client back on, simply press the POWER ( ) button
again.
➢
You can also switch on by pressing the P/ or Numeric
button( ~ ).
☛Do not leave your client in Standby mode for long
periods of time (when you are away on holiday, for
example). Turn your client off by pressing the “ ”
button (On/Off) on the front of the client. It is best to
unplug the set from the mains and aerial.
MONTE(BN68-00625A-01)_UK 4/20/04 08:23 PM Page 12

English-13
Becoming Familiar with the Remote Control
The remote control is used mainly to:
◆Change channels and adjust the volume
◆Set up the client using the on-screen menu system
The following table presents the most frequently used buttons and
their functions.
Button Viewing Function Menu Function
Used to display the -
next stored channel.
Used to display the
-
previous stored channel.
to Used to display the corresponding channels.
-/-- Used to select a channel numbered ten or over.
Press this button, and the “--”symbol is displayed.
Enter the two-digit channel number.
PRE-CH Press the PRE-CH button. The TV will switch to the last
channel viewed.
To quickly switch between two channels that are far apart,
tune to one channel, then use the number button to select
second channel. Then, use the PRE-CH button to quickly
alternate between them.
Used to increase the -
volume.
Used to decrease the
-
volume.
MUTE Used to switch the sound off temporarily.
➢To turn the sound back on, press this button again,
or press the or button.
MENU Used to display the Used to return to the previous
on-screen menu system. menu or normal viewing.
- Used to:
◆Display a submenu
containing selections for
the current menu option
◆Increase/decrease a
menu option value
- Used to confirm your choice.
EXIT - Used to exit from the menu
system and return to normal
viewing directly.
TV Used to return the TV -
mode when it is in external
input mode.
MONTE(BN68-00625A-01)_UK 4/20/04 08:23 PM Page 13

English-14
When the television is initially powered on, three basic customer
settings proceed automatically and subsequently: setting the
language, channel and clock.
1If the client is in Standby mode, press the POWER( ) button on
the remote control.
Result: The message Plug & Play is displayed. It flickers for
one time and then Language menu is automatically
displayed.
2Select the appropriate language by pressing the ▼or ▲ button.
Press the ENTER ( ) button to enter the language.
Result: The message Check antenna input is displayed.
➢If any language is not selected on the Language menu, the
Language menu will disappear about 30 seconds later.
3Make sure that the antenna is connected to the TV.
Press the ENTER ( ) button.
Result: The Country menu is displayed.
4Select your country by pressing the ▼or ▲button. Press the
ENTER ( ) button.
Result: The Auto Store menu is displayed with the horizontal
bar, and then channels are stored in an order which
reflects their positions in the frequency range. Finally,
the search will end automatically and the Clock menu
will be displayed.
➢Refer to “Storing Channels Automatically”on page 16.
5Press the œ or √button to move to the hour or minute. Set the
hour or minute by pressing the ▼or ▲ button.
➢Refer to “Setting and Displaying the Current Time”on page
29.
6When you have finished, press the MENU ( ) button.
Result: The message Enjoy your watching. is displayed
and then the channel which has been stored will be
activated.
7If you want to reset this feature...
1Press the MENU ( ) button.
2Press the ▼or ▲ button to select Setup. Press the
ENTER ( ) button.
Result: The options available in the Setup group are
displayed.
3Press the ▼or ▲ button to select Plug & Play.
Press the ENTER ( ) button.
Result: This feature starts with the message Plug & Play
is displayed.
Plug & Play Feature
Plug & Play
Enjoy your watching.
Language
Move Enter Stop
English
Deutsch
Français
Nederland
Español
Italiano
††
Country
Move Enter Stop
……
Schweiz
Sverige
UK
Eastern Europe
Others
Move Enter Stop
398MHz P 8 C21 -----
42%
Stop Clock
Auto Store
Move Adjust Stop
Hour Minute
01 00
Clock
…
†
Move Enter Stop
Check antenna input
OK Clock
Plug & Play
MONTE(BN68-00625A-01)_UK 4/20/04 08:23 PM Page 14

English-15
When you start using your television for the first time, you must
select the language which will be used for displaying menus and
indications.
1Press the MENU ( ) button.
Result: The main menu is displayed.
2Press the ▼or ▲ button to select Setup. Press the ENTER ()
button.
Result: The options available in the Setup group are
displayed.
3Press the ▼or ▲ button to select Language. Press the ENTER
( ) button.
4Select the appropriate language by pressing the ▼or ▲button.
Press the ENTER ( ) button to confirm your choice.
5Press the EXIT ( ) button to exit.
Choosing Your Language
TV Setup
Move Enter Return
Time √√
Plug & Play √√
Language : English √√
Blue Screen : Off √√
Power Saving : Off √√
Wireless LAN √√
English
Deutsch
Français
Nederland
Español
††
MONTE(BN68-00625A-01)_UK 4/20/04 08:23 PM Page 15

English-16
You can scan for the frequency ranges available to you (and
availability depends on your country). Automatically allocated
programme numbers may not correspond to actual or desired
programme numbers. However you can sort numbers manually and
clear any channels you do not wish to watch.
1Press the MENU ( ) button.
Result: The main menu is displayed.
2Press the ▼or ▲ button to select Channel. Press the
ENTER ( ) button.
Result: The options available in the Channel group are
displayed.
3Press the ENTER ( ) button again.
4Select your country by pressing the ▼or ▲button. The countries
are displayed in the following order: Belgie - Deutschland -
Espania - France - Italia - Nederland - Schweiz -
Sverige - UK - Eastern Europe - Others
5Press the ENTER ( ) button to confirm your country selected.
6Press the ▼or ▲button to select Auto Store. Press the ENTER
( ) button.
Result: The Auto Store menu is displayed with the horizontal
bar.
7Press the ENTER ( ) button to start the search.
Result: The channels are stored in an order which reflects
their positions in the frequency range. Finally, the
search will end automatically.
➢To stop the search before it has finished, select Stop or
Return by pressing the œ or √button, then press the
ENTER ( ) button.
8When searching and storing are complete, the Sort menu is
displayed.
◆ To sort the stored channels into the desired numerical order,
go to Step 4of the “Sorting the Stored Channels”procedure
on page 17.
◆ To exit from the channel store function without sorting the
channels, press the EXIT ( ) button to exit.
9When the channels have been stored, you can:
◆ Sort them in the order required (refer to page 17)
◆ Clear a channel (refer to page 20)
◆ Assign a name to the stored channels (refer to page 21)
◆ Fine tune channel reception if necessary (refer to page 22)
Storing Channels Automatically
TV Channel
Move Enter Return
Country :UK √√
Auto Store √√
Manual Store √√
Add/Delete √√
Sort √√
Name √√
Fine Tune √√
TV Channel
Move Enter Return
Country :UK √√
Auto Store √√
Manual Store √√
Add/Delete √√
Sort √√
Name √√
Fine Tune
……
Schweiz
Sverige
UK
Eastern Europe
Others
Move Enter
83MHz P 1 S44 -----
0%
Start Return
Auto Store
TV Sort
Move Enter Return
Prog. Ch. Name
……
1 S44 ----- √√
2 S10 -----
3 C 8 -----
4 C21 -----
5 C23 -----
††
MONTE(BN68-00625A-01)_UK 4/20/04 08:23 PM Page 16

English-17
This operation allows you to change the programme numbers of
stored channels. This operation may be necessary after using auto
store. You can delete the channels you do not want to keep.
1Press the MENU ( ) button.
Result: The main menu is displayed.
2Press the ▼or ▲button to select Channel. Press the ENTER
( ) button.
Result: The options available in the Channel group are
displayed.
3Press the ▼or ▲button to select Sort. Press the ENTER ()
button.
Result: The Sort menu is displayed.
4Select the channel that you wish to move by pressing the ▼or ▲
button. Press the ENTER ( ) button.
5Select the number of the programme to which the channel is to be
moved by pressing the ▼or ▲ button. Press the ENTER ()
button.
Result: The channel is moved to its new position and all other
channels are shifted accordingly.
6Press the EXIT ( ) button to exit.
Sorting the Stored Channels
TV Channel
Move Enter Return
Country :UK √√
Auto Store √√
Manual Store √√
Add/Delete √√
Sort √√
Name √√
Fine Tune √√
TV Sort
Move Enter Return
Prog. Ch. Name
……
1 S44 ----- √√
2 S10 -----
3 C 8 -----
4 C21 -----
5 C23 -----
††
TV Sort
Move Enter Return
Prog. Ch. Name
……
œœ S44 -----
2 S10 -----
3 C 8 -----
4 C21 -----
5 C23 -----
††
MONTE(BN68-00625A-01)_UK 4/20/04 08:23 PM Page 17

English-18
You can store up to 100 television channels, including those
received via cable networks.
When storing channels manually, you can choose:
◆Whether or not to store each of the channels found
◆The programme number of each stored channel which
you wish to identify
1Press the MENU ( ) button.
Result: The main menu is displayed.
2Press the ▼or ▲button to select Channel. Press the
ENTER ( ) button.
Result: The options available in the Channel group are
displayed.
3Press the ▼or ▲button to select Manual Store. Press the
ENTER ( ) button.
Result: The options available in the Manual Store group are
displayed with Programme is selected.
4Press the ENTER ( ) button.
5To assign a programme number to a channel, press the ▼or ▲
button. Press the ENTER ( ) button.
6Press the ▼or ▲button to select Colour System. Press the
ENTER ( ) button.
7Press the ▼or ▲button to select the broadcasting standard.
Press the ENTER ( ) button.
Result: The colour standards are displayed in the following
order:
AUTO - PAL - SECAM - NT4.43
8Press the ▼or ▲button to select Sound System. Press the
ENTER ( ) button.
9Press the ▼or ▲button to select the sound standards. Press the
ENTER ( ) button.
Result: The sound standards are displayed in the following
order:
BG - DK - I - L
Storing Channels Manually
TV Channel
Move Enter Return
Country :UK √√
Auto Store √√
Manual Store √√
Add/Delete √√
Sort √√
Name √√
Fine Tune √√
TV Manual Store
Move Enter Return
Programme : P17 -----
Colour System : AUTO √√
Sound System : BG √√
Channel : C 26
Search : 507MHz
Store : ?
TV Manual Store
Adjust Enter Return
Programme : P16 -----
Colour System : AUTO √√
Sound System : BG √√
Channel : C 26
Search : 507MHz
Store : ?
TV Manual Store
Move Enter Return
Programme : P17 -----
Colour System : AUTO √√
Sound System : BG √√
Channel : C 26
Search : 507MHz
Store : ?
AUTO
PAL
SECAM
NT4.43
TV Manual Store
Move Enter Return
Programme : P17 -----
Colour System : AUTO √√
Sound System : BG √√
Channel : C 26
Search : 507MHz
Store : ?
BG
DK
I
L
MONTE(BN68-00625A-01)_UK 4/20/04 08:23 PM Page 18

English-19
10 If you know the number of the channel to be stored, see the
following steps.
◆ Press the ▼or ▲button to select Channel.
◆ Press the ENTER ( ) button.
◆ Press the ▼or ▲button to select C(Air channel) or S(Cable
channel).
◆ Press the √ button.
◆ Press the ▼or ▲button to select indicate the required
number.
◆ Press the ENTER ( ) button.
➢You can also select the channel number directly by
pressing the numeric buttons (0~9).
➢If no sound or abnormal sound, re-select the sound standard
required.
11 If you do not know the channel numbers, see the following setps.
◆ Press the ▼or ▲button to select Search.
◆ Press the ENTER ( ) button.
◆ Press the ▼or ▲button to start the search.
◆ Press the ENTER ( ) button.
Result: The tuner scans the frequency range until the first
channel or the channel that you selected is received
on your screen.
12 To store the channel and associated programme number, select
Store by pressing the ▼or ▲ button. Press the ENTER ()
button.
13 Press the ▼or ▲button to select OK. Press the ENTER ()
button.
14 Repeat Steps 10 to 13 for each channel to be stored.
15 Press the EXIT ( ) button to exit.
☛Channel mode
◆P(Programme mode): When completing tuning, the
broadcasting stations in your area have been assigned to
position numbers from P00 to max P99. You can select a
channel by entering the position number in this mode.
◆C(Real channel mode): You can select a channel by
entering the assigned number to each air broadcasting station
in this mode.
◆S(Cable channel mode): You can select a channel by
entering the assigned number for each cable channel in this
mode.
Storing Channels Manually (continued)
TV Manual Store
Move Enter Return
Programme : P17 -----
Colour System : AUTO √√
Sound System : BG √√
Channel : C 26
Search : 507MHz
Store : ?
TV Manual Store
Move Enter Return
Programme : P17 -----
Colour System : AUTO √√
Sound System : BG √√
Channel : C 26
Search : 507MHz
Store : ?
TV Manual Store
Adjust Enter Return
Programme : P17 -----
Colour System : AUTO √√
Sound System : BG √√
Channel : C 26
Search : 508MHz
Store : ?
TV Manual Store
Move Enter Return
Programme : P17 -----
Colour System : AUTO √√
Sound System : BG √√
Channel : C 26
Search : 507MHz
Store : ?
TV Manual Store
Adjust Enter Return
Programme : P17 -----
Colour System : AUTO √√
Sound System : BG √√
Channel : C 26
Search : 508MHz
Store : OK
TV Manual Store
Adjust Enter Return
Programme : P17 -----
Colour System : AUTO √√
Sound System : BG √√
Channel : C 26
Search : 507MHz
Store : ?
MONTE(BN68-00625A-01)_UK 4/20/04 08:23 PM Page 19

English-20
You can exclude the channels you chosen from the channels you
scanned. When you scan through the stored channels, those you
have chosen to skip are not displayed.
All of the channels that you do not specifically choose to skip are
displayed during scanning.
1Press the MENU ( ) button.
Result: The main menu is displayed.
2Press the ▼or ▲button to select Channel. Press the ENTER
( ) button.
Result: The options available in the Channel group are
displayed.
3Press the ▼or ▲button to select Add/Delete. Press the ENTER
( ) button.
Result: The Add/Delete menu is displayed
4Press the Por button to select the channel to add or
erase. If necessary, select Add or Delete by pressing the ENTER
( ) button.
5Repeat Step 4for each channel to be added or erased.
6Press the EXIT ( ) button to exit.
Skipping Unwanted Channels
TV Channel
Move Enter Return
Country :UK √√
Auto Store √√
Manual Store √√
Add/Delete √√
Sort √√
Name √√
Fine Tune √√
Change Move Enter
P17 Not in Memory
Add Return
Add/Delete
Change Move Enter
P17 In Memory
Delete Return
Add/Delete
MONTE(BN68-00625A-01)_UK 4/20/04 08:23 PM Page 20