Samsung 4 Series User manual

Plasma TV
Manual do Usuário
© 2012 Samsung Electronics Co., Ltd. All rights reserved.
Contate a SAMSUNG EM TODO O MUNDO
Caso tenha dúvidas ou comentários sobre os produtos da Samsung, entre em contato com o centro de atendimento ao cliente da
SAMSUNG.
País Assistência Técnica Web Site
ARGENTINA 0800-333-3733 www.samsung.com
BRASIL 0800-124-421
4004-0000
www.samsung.com
CHILE 800-SAMSUNG(726-7864) www.samsung.com
NICARAGUA 00-1800-5077267 www.samsung.com
HONDURAS 800-7919267 www.samsung.com
COSTA RICA 0-800-507-7267 www.samsung.com
EQUADOR 1-800-10-7267 www.samsung.com
EL SALVADOR 800-6225 www.samsung.com
GUATEMALA 1-800-299-0013 www.samsung.com
JAMAICA 1-800-234-7267 www.samsung.com
PANAMÁ 800-7267 www.samsung.com
PUERTO RICO 1-800-682-3180 www.samsung.com
REP. DOMINICANA 1-800-751-2676 www.samsung.com
TRINIDAD & TOBAGO 1-800-SAMSUNG(726-7864) www.samsung.com
VENEZUELA 0-800-100-5303 www.samsung.com
COLÔMBIA 01-8000112112 www.samsung.com
BN68-04363B
BN68-04363B-00
Obrigado por comprar este produto Samsung.
Para receber um serviço mais completo, registre
seu produto no site:
www.samsung.com/register
[PE400-ZD]BN68-04363B.indb 1 2012-03-27 �� 4:18:12

2
English
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.
Product design and specifications may be changed without notice.
Important Warranty Information Regarding Television Format Viewing
• Screen Image retention
Do not display a still image (such as that from a video game) on the plasma display panel for more than a few minutes. Still images can cause screen
image retention (burn in). To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.
• Heat on the top of the Plasma TV
The top side of the TV may become hot after long periods of use as heat dissipates from the panel through the vent hole in the upper part of the TV.
This is normal and does not indicate any defect or operational failure of unit.
However, children should be prevented from touching the upper part of the TV.
• The TV is making a ‘cracking’ noise.
A ‘cracking’ noise may occur when the TV contracts or expands due to a change in the surrounding environment such as temperature or humidity.
This is normal and not a defect.
• Cell Defects
The PDP uses a panel consisting of 1,226,880(SD-level) to 6,221,000 (FHD-level) pixels which require sophisticated technology to produce.
However, there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.
• Avoid operating the TV at temperatures below 41°F (5°C)
• A still image displayed too long may cause permanent damage to the PDP Panel.
Watching the Plasma TV in 4:3 format for a long period of time may leave traces of the borders on the left, right, top, or bottom
of the screen. Playing a DVD or a game console may have a similar effect.
Damage caused by the above effect is not covered by the warranty.
• After-images on the Screen.
Displaying still images from Video games for longer than a certain period of time may produce partial after-images.
To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images for a long time.
• Warranty
Warranty does not cover any damage caused by image retention.
Burn-in is not covered by the warranty.
[PE400-ZD]BN68-04363B.indb 2 2012-03-27 �� 4:18:13

3
English
Contents
Check the Symbol!
tO
This function can be used by pressing the
TOOLS button on the remote control. NOTE Step by step guide : Informs you how to access the menu.
Getting Started
yAccessories .............................................................. 4
ySecuring the Installation Space ................................. 4
yUsing the TV’s Controller (Panel Key) ......................... 5
yRemote Control Buttons ........................................... 6
yConnecting to an Antenna ........................................ 7
ySetup (Initial Setup) ................................................... 7
Connections
yConnecting to an AV devices .................................... 9
yChanging the Input Source ..................................... 10
Basic Features
yChannel Menu ........................................................ 11
Using the INFO button (Now & Next guide) 11
Using Channel menu 11
Memorizing channels 13
Other Features 14
yPicture Menu .......................................................... 14
Changing the Preset Picture Mode 14
Adjusting Picture Settings 14
Changing the Picture Options 15
ySound Menu ........................................................... 17
Changing the Preset Sound Mode 17
Sound Settings 17
Adjusting Sound Settings 17
Preference Features
ySystem Menu .......................................................... 18
Setting the Setup 18
Setting the Time 18
Using the Sleep Timer 18
Setting the On / Off Timer 18
Locking Programs 19
Economical Solutions 19
Other Features 20
ySupport Menu ......................................................... 22
Support Menu 22
Advanced Features
yMedia Play .............................................................. 23
Using the Media Contents 23
Connecting a USB Device 23
Screen Display 24
Media Contents - Additional Functions 27
Other Information
yInstalling the Wall Mount ......................................... 29
ySecuring the TV to the Wall ..................................... 30
To avoid the TV from falling 30
yAnti-theft Kensington Lock ...................................... 30
yTroubleshooting ...................................................... 31
License 34
yStorage and Maintenance ....................................... 34
ySpecifications ......................................................... 35
yIndex ...................................................................... 36
[PE400-ZD]BN68-04363B.indb 3 2012-03-27 �� 4:18:13

Getting Started
4
English
Accessories
✎ Please make sure the following items are included with your TV. If any items are missing, contact your dealer.
✎ The items’ colors and shapes may vary depending on the models.
✎ Check that there are no accessories hidden behind packing materials when you open the box.
• Remote Control & Batteries (AAA x 2)
• Owner’s Instructions
• Warranty Card / Safety Guide (Not available in some locations)
• Cleaning-Cloth
• Power Cord
Input Cables (Sold Separately)
HDMI Component Composite (AV) Coaxial (RF)
Securing the Installation Space
Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.
Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product.
✎
When using a stand or wall-mount, use parts provided by Samsung Electronics only.
• If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.
✎
The appearance may differ depending on the product.
✎
Be careful when you contact the TV because some parts can be somewhat hot.
Installation with a stand. Installation with a wall-mount.
4 inches
4 inches
4 inches 4 inches
4 inches
4 inches
4 inches
Getting Started
[PE400-ZD]BN68-04363B.indb 4 2012-03-27 �� 4:18:16

01 Getting Started
5
English
Using the TV’s Controller (Panel Key)
✎ The product color and shape may vary depending on the model.
Power on Turns the TV on by pressing the controller in standby mode.
Adjusting the volume Adjusts the volume by moving the controller from side to side when the power is on.
Selecting a channel Selects a channel by moving the controller up and down when the power is on.
Using the function menu Press the controller when the power is on, then the function menu screen appears. If you press it
again, the function menu screen disappears.
Selecting the MENU(
m
)Selects the MENU(
m
) by moving the controller in the function menu screen. The OSD(On Screen
Display) of your TV’s feature appears.
Selecting the CONTENT Selects the CONTENT by moving the controller in the function menu screen. The Contents
Home main screen appears.
Selecting the Source (s)Selects the Source(s) by moving the controller in the function menu screen. The Source list
screen appears.
Power Off (
P
)Selects the Power Off (
P
) to turn the TV off by moving the controller in the function menu
screen.
✎ Exits the menu when pressing the controller more than 1 second.
✎ When selecting the function by moving the controller to the up/down/left/ right directions, be sure not to press the
controller. If you press it first, you cannot operate it to move the up/down/left/right directions.
Standby mode
Your TV enters Standby mode when you turn it off and continues to consume a small amount of electric power. To be safe
and to decrease power consumption, do not leave your TV in standby mode for long periods of time (when you are away on
vacation, for example). It is best to unplug the power cord.
Function menu
TV Controller
Remote control sensor
CONTENT
m R s
P
Return
[PE400-ZD]BN68-04363B.indb 5 2012-03-27 �� 4:18:16

Getting Started
6
English
Remote Control Buttons
✎ This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually impaired
persons.
Installing batteries (Battery size: AAA)
✎ NOTE
x Use the remote control within 23 feet of the TV.
x Bright light may affect the performance of the remote control. Avoid
using when near special fluorescent lights or neon signs.
x The color and shape may vary depending on the model.
Press to select additional channels (digital)
being broadcast by the same station. For
example, to select channel ‘54.3’, press ‘54’,
then press ‘-’ and ‘3’.
Return to the previous channel.
Press to directly access to channels.
Turns the TV on and off.
Use these buttons in a specific feature.
MTS: Press to choose stereo, mono or
Separate Audio Program (SAP broadcast).
P.SIZE: Choose the picture size.
CC: Controls the caption decoder.
Cut off the sound temporarily.
Display the EPG (Electronic Program Guide).
Displays the channel list on the screen.
Press to display information on the TV
screen.
Quickly select frequently used functions.
Selects the on-screen menu items and
changes the values seen on the menu.
Exit the menu.
Return to the previous menu.
Display and select the available video
sources.
Use these buttons according to the direction
on screen.
Change channels.
Displays the main on-screen menu.
View the Contents Home.
Adjusts the volume.
MTS
GUIDE
CONTENT
[PE400-ZD]BN68-04363B.indb 6 2012-03-27 �� 4:18:17

01 Getting Started
7
English
Connecting to an Antenna
When the TV is initially powered on, basic settings proceed automatically.
✎ Connecting the power cord and antenna.
✎ The PDP device may interfere with an amateur radio or AM radio.
✎ When using two-way radio mobile and portable units or amateur radio or AM radio near by your TV, this may cause the
TV to malfunction.
✎ The position of power input port may differ depending on the model.
Setup (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the POWER P button.
Setup is available only when the Source is set to TV.
✎ To start the Setup, enter the password using the remote control. The default password is 0-0-0-0.
✎ To return to the previous step, press the Previous button.
1. Menu Language: Selecting a menu language
Press the ▲ or ▼ button, then press the ENTER E button. Select the desired OSD (On Screen Display) language.
2. Use Mode: Selecting the usage mode
Press the ▲ or ▼ button, then press the ENTER E button.
• Select the Home Use mode. Store Demo Mode is for retail environments.
• When pressing TV controller, the function menu screen appears. Select the MENU( m ) and press it more than 5 seconds
using the controller. The Store Demo mode is set. Cancel the Store Demo by selecting Source(s) and pressing it
more than 5 seconds.
• Store Demo is only for shop display. If you select it, several functions are not able to use. Please select Home Use when
you watch at home.
ANT OUT
VHF/UHF Antenna
Power Input
or
Cable
Antenna Cable (Not Supplied)
[PE400-ZD]BN68-04363B.indb 7 2012-03-27 �� 4:18:18

Getting Started
8
English
3. Auto Program (1): Selecting how you watch your TV
Let’s find and store channels on your TV. Do you need to search for channels?
• Yes, I need to.: Memorize all of the available channels using RF cable.
• No, I don’t need to.: Do not need Auto program when connecting a TV to set-top box.
✎ You can complete Setup by selecting it.
4. Auto Program (2): Selecting and memorizing channels
Select the Next to run Auto Program.
Press the ▲ or ▼ button to select Air or Cable, and then press the ENTER E button.
The channel search will start automatically.
For more information, refer to Channel → Auto Program.
✎ Press the ENTER E button at any time to interrupt the memorization process.
5. Clock: Setting the Clock Mode
Set the Clock Mode automatically or manually.
• Auto : Select the time zone where you live. (for Brazil, Chile, Ecuador)
• Manual : Allows you to manually set the current date and time.
6. Setup Complete
Press the ENTER E button.
✎ The completed settings are displayed.
If You Want to Reset This Feature...
O
MENU
m
→ System → Setup → ENTER
E
[PE400-ZD]BN68-04363B.indb 8 2012-03-27 �� 4:18:19

02 Connections
9
English
Connecting to an AV devices
¦Available devices: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box)
satellite receiver
Using an HDMI Cable
✎ HDMI IN 1, 2
x The picture may not display normally (if at all) or the audio may not work if an external device that uses an older
version of HDMI mode is connected to the TV. If such a problem occurs, ask the manufacturer of the external device
about the HDMI version and, if out of date, request an upgrade.
x Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection error may occur.
x A basic high-speed HDMI cable or one with ethernet is recommended. This product does not support the ethernet
function via HDMI.
¦Available devices: DVD, Blu-ray player, cable box, STB satellite receiver, VCR
Using a Component or an Audio/Video Cable
✎ When connecting to AV IN, the color of the AV IN [Y/VIDEO] jack (green) will not match the video cable (yellow).
✎ For better picture quality, we recommend the Component connection over the A/V connection.
HDMI OUT
9$

9$

Device
HDMI Cable (Not Supplied)
Connections
Device
Device
Red
Red
White
White Yellow
Red Blue Green
Audio Cable
(Not Supplied)
Audio Cable
(Not Supplied)
Video Cable
(Not Supplied)
Component Cable
(Not Supplied)
[PE400-ZD]BN68-04363B.indb 9 2012-03-27 �� 4:18:20

Connections
10
English
✎ NOTE
x The interlace mode is not supported.
x The set might operate abnormally if a non-standard video format is selected.
x PC and PC/DVI AUDIO IN input are not supported.
x DIGITAL AUDIO OUT(OPTICAL) is not supported.
SERVICE
Connector for service only.
Changing the Input Source
¦Source
Use to select TV or other external input sources such as DVD / Blu-ray players / cable box / STB satellite receiver connected
to the TV.
1. Press the SOURCE button on your remote.
2. Select a desired external input source.
■TV / HDMI1 / HDMI2 / AV / Component
✎ In the Source, connected inputs will be highlighted.
How to use Edit Name
In the Source, press the TOOLS button, and then you can set an external input sources name you want.
■VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI PC / DVI Devices / TV /
IPTV / Blu-ray / HD DVD / DMA: Name the device connected to the input jacks to make your input source selection easier.
Information
You can see detailed information about the connected external device.
[PE400-ZD]BN68-04363B.indb 10 2012-03-27 �� 4:18:21