Samsung 8+ series User manual

© 2012 Samsung Electronics Co., Ltd. All rights reserved.
BN68-04073A-03
Contate a SAMSUNG EM TODO O MUNDO
Caso tenha dúvidas ou comentários sobre os produtos da Samsung, entre em contato com o centro de atendimento ao cliente da
SAMSUNG.
País Assistência Técnica Web Site
ARGENTINA 0800-333-3733 www.samsung.com/ar
BRASIL 0800-124-421
4004-0000
www.samsung.com.br
CHILE 800-SAMSUNG(726-7864)
From mobile [phone]
www.samsung.com/cl
COLOMBIA 01-8000112112 www.samsung.com.co
COSTA RICA 0-800-507-7267 www.samsung.com/latin
REP. DOMINICANA 1-800-751-2676 www.samsung.com/latin
EQUADOR 1-800-10-7267 www.samsung.com/latin
EL SALVADOR 800-6225 www.samsung.com/latin
GUATEMALA 1-800-299-0013 www.samsung.com/latin
HONDURAS 800-27919267 www.samsung.com/latin
JAMAICA 1-800-234-7267 www.samsung.com/latin
NICARAGUA 00-1800-5077267 www.samsung.com/latin
PANAMA 800-7267 www.samsung.com/latin
PERU 0-800-777-08 www.samsung.com/latin
PORTO RICO 1-800-682-3180 www.samsung.com/latin
TRINIDAD & TOBAGO 1-800-SAMSUNG(726-7864) www.samsung.com/latin
VENEZUELA 0-800-100-5303 www.samsung.com
Plasma TV
Manual do Usuário
SUPPORT
Obrigado por adquirir este produto Samsung.
Para receber um serviço mais completo, registre
seu produto no site
www.samsung.com/register
[PE8000-ZD]BN68-04073A-03.indb 1 2012-05-11 �� 11:02:56

English - 2
A detailed User’s Manual is built into your TV. For more information about how to view this e-Manual see page 43.
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearances. Product design and
specifications may be changed without notice.
User Instructions
• Screen Image retention
Do not display a still image (such as on a video game) on the plasma display panel for more than several minutes as it can cause screen image
retention. This image retention is also known as ‘screen burn’. To avoid such image retention, refer to e-Manual to reduce the degree of brightness
and contrast of the screen when displaying a still image.
• Heat on the top of the Plasma TV
The top side of the product may be hot after long periods of use as heat dissipates from the panel through the vent hole in the upper part of the
product. This is normal and does not indicate any defect or operation failure of the product. However, children should be prevented from touching
the upper part of the TV.
• The TV is making a ‘cracking’ noise.
A ‘cracking’ noise may occur when the product contracts or expands due to a change in the surrounding environment such as temperature or
humidity. This is normal and not a defect of the unit.
• Cell Defects
Your plasma TV has a panel containing 2,360,000 (HD-level) to 6,221,000 (FHD-level) pixels which require sophisticated technology to produce.
However, there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.
• Avoid operating the TV at temperatures below 41°F (5°C)
• A still image displayed too long may cause permanent damage to the PDP Panel.
Watching the Plasma TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center
of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause similar effects
to the screen. Damages caused by the above effect are not covered by the Warranty.
• After-images on the Screen.
Displaying still images from Video games or a PC for longer than a certain period of time may produce partial after-images.
To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images for a long time.
• Warranty
Warranty does not cover any damage caused by image retention. Burn-in is not covered by the warranty.
• Caution
The glass screen of your PDP TV can break if you accidently drop the TV. Handle the TV with care.
When moving the TV, always have two or more people pick it up and carry it as a safety precaution. Do not lay the TV flat on its
face or back.
Your Samsung Plasma TV is a high quality television that has been carefully packaged to protect the integrity of its glass panel and component parts
during shipment. It is, nonetheless, a fragile piece of electronics that requires careful handling. Refrain from putting undue stress on any part of the
packaging when shipping or unpacking the TV. Use care when installing the TV. Avoid placing the TV in a location where it may be struck, exposed to
sharp impacts, or fall. Panel breakage caused by a fall or impact strike is not covered under the manufacturer's warranty.
[PE8000-ZD]BN68-04073A-03.indb 2 2012-05-11 �� 11:02:57

English - 3
List of Features
•3D: This exciting new feature enables you to view 3D content.
•SMART HUB: Your gateway to all your content, integrated in one place.
−Provides diverse entertainment choices.
−Lets you control your entertainment life with an easy-to-use, user friendly user interface.
−Gives you easy access to diverse apps, with more being added every day.
−Lets you customize your TV by grouping and sorting apps to your taste.
•AllShare Play: Lets you access, view, or play photos, videos, or music located on USB devices,
digital cameras, cell phones, and PCs. PCs and cell phones can be accessed wirelessly, through your
wireless network.
•Anynet+ (HDMI-CEC): Allows you to control all connected Samsung devices that support Anynet+
with your Samsung TV’s remote.
•e-Manual: A detailed, on-screen user's manual that's built into your TV. (page 43)
•SMART Interaction: Using this function, you can access and control menu options and functions
using speech or gestures. (page 33)
Accessories and Cables
✎Please make sure the following items are included with your TV. If any items are missing, contact your
dealer.
✎The items’ colors and shapes may vary depending on the model.
✎Make sure that there are no accessories hidden behind or under packing materials after you open the
box.
•Smart Touch Control & Batteries (AA x 2)
•IR Blaster & Batteries (AA x 4)
•Remote Control & Batteries (AAA x 2)
•User Manual
•Cleaning Cloth
•Warranty Card / Safety Guide
•3D Active Glasses
•Power Cord
Input Cables (Sold Separately)
HDMI HDMI-DVI Audio
Component Composite (AV) Coaxial (RF)
[PE8000-ZD]BN68-04073A-03.indb 3 2012-05-11 �� 11:02:57

English - 4
Providing Proper Ventilation for Your TV
Keep the required distances between the product and other objects (e.g. walls) to ensure proper
ventilation.
Failing to maintain proper ventilation may result in a fire or a problem with the product caused by an
increase in its internal temperature.
✎Whether you install your TV using a stand or a wall-mount, we strongly recommend you use parts
provided by Samsung Electronics only.
•If you use parts provided by another manufacturer, it may cause difficulties with the product or result
in injury caused by the product falling.
Installation with a stand. Installation with a wall-mount.
10 cm
10 cm
10 cm 10 cm
10 cm
10 cm
10 cm
Other Warnings
✎The actual appearance of the TV may differ from the images in this manual, depending on the model.
✎Be careful when you touch the TV. Some parts can be somewhat hot.
[PE8000-ZD]BN68-04073A-03.indb 4 2012-05-11 �� 11:02:57

English - 5
Connecting the Power Cord and the Antenna or Cable Connection
✎Plug the power cord into a wall outlet only after you have made all other connections.
✎If you are connecting your TV to a cable or satellite box using HDMI, Component, or Composite
connections, you do not need to connect the ANT IN jack to an antenna or a cable connection.
✎The Plasma TV may interfere with an amateur radio or AM radio.
✎Using two-way radio mobile and portable units or amateur radio or AM radio near your TV may cause
the TV to malfunction.
✎Use caution when you move or swivel the TV if the antenna cable is tightly connected. You could
break the antenna jack off the TV.
VHF/UHF Antenna
Power Input
or
Antenna Cable (Not Supplied)
Cable
[PE8000-ZD]BN68-04073A-03.indb 5 2012-05-11 �� 11:02:58

English - 6
Connecting to AV Devices (Blu-ray Players, DVD Players, etc.)
Using an HDMI Cable for an HD connection (up to 1080p, HD digital signals)
For the best quality HD picture, we recommend using an HDMI connection.
Use with DVD players, Blu-ray players, HD cable boxes, and HD Set-Top Box satellite receivers.
✎HDMI IN 1 (DVI), HDMI IN 2 (ARC), HDMI IN 3 (MHL)
•For the best picture and audio quality, connect digital devices to the TV using HDMI cables.
•An HDMI cable supports digital video and audio signals, and does not require an audio cable.
−To connect the TV to a digital device that does not support HDMI output, use an HDMI to DVI
cable and audio cables.
•If you connect an external device to the TV that uses an older version of HDMI, the video and audio
may not work. If this occurs, ask the manufacturer of the device about the HDMI version and, if it is
out of date, request an upgrade.
•Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection
error may occur.
•We recommend using a basic high-speed HDMI cable or an HDMI cable that is Ethernet
compatible. Note that this product does not support the Ethernet function via HDMI.
•This product supports the 3D and ARC (Audio Return Channel) functions via an HDMI cable. Note
that the ARC function is supported by the HDMI IN 2 (ARC) port only.
•The ARC function allows digital audio to output via the HDMI IN 2 (ARC) port on the TV. It can be
enabled only when the TV is connected with an audio receiver that supports the ARC function.
•This product supports the Mobile High-Definition Link (MHL) function via an HDMI-MHL cable. Note
that the MHL function is supported by the HDMI IN 3 (MHL) port only.
•The MHL function lets you display a mobile device's screen via the HDMI IN 3 (MHL) port on the
TV. It can be enabled only when the TV is connected with a mobile device that supports the MHL
function. For more detailed information, see "Using the MHL function" in e-Manual.
•When you use MHL devices via a MHL cable, Picture Size is set to Screen Fit automatically. But if
you use MHL devices via an HDMI cable, Picture Size is not set to Screen Fit automatically. To view
an original size, select Screen Fit in the Picture Size menu (Menu →Picture →Picture Size).
•If you use MHL devices via an HDMI cable, The TV will be recognized as the HDMI input. In this
case, the TV may work differently than when you use MHL devices via a MHL cable.
WR
(HDD 5V 1A)
HDMI IN
2 (ARC)
HDMI IN
3 (MHL)
HDMI IN
1 (DVI)
(
HDD 5V 1A
)
HDMI
IN
2
(
AR
C)
HDMI
IN
3
(
MHL
)
HDMI
IN
1
(
DVI
)
HDMI IN
2 (ARC)
HDMI IN
3 (MHL)
HDMI IN
1 (DVI)
HDMI OUT
DVI OUT
R-AUDIO-L
AUDIO OUT
HDMI Cable (Not Supplied)
HDMI to DVI Cable (Not Supplied)
Red White
Audio Cable (Not Supplied)
Device
Device
[PE8000-ZD]BN68-04073A-03.indb 6 2012-05-11 �� 11:02:58

English - 7
✎For the best cable connection to this product, use cables no thicker than the cable illustrated below:
•Maximum thickness - 0.55 inches (14mm)
Using a Component Cable (up to 1080p HD signals) or an Audio/Video Cable (480i analog signals
only)
Use with DVD players, Blu-ray players, cable boxes, STB satellite receivers, VCRs.
✎For better picture quality, we recommend the Component connection over the A/V connection.
✎When you connect a Video cable to AV IN, the color of the AV IN [VIDEO] jack (green) will not match
the video cable (yellow).
Red White
Red
Red
Blue Green
White Yellow
Component Cable
(Not Supplied)
Video Cable
(Not Supplied)
Audio Cable
(Not Supplied)
DeviceDevice
Audio Cable
(Not Supplied)
[PE8000-ZD]BN68-04073A-03.indb 7 2012-05-11 �� 11:02:59

English - 8
Connecting to Audio Devices
Using an Optical (Digital) Cable Connection
Use with Digital Audio Systems, Amplifiers, and Home Theaters.
✎DIGITAL AUDIO OUT (OPTICAL)
•When you connect a Digital Audio System to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease
the volume of both the TV and the system.
•5.1 CH (channel) audio is available when you connect the TV to an external device supporting 5.1
CH.
•When the receiver (home theater) is set to on, you can hear sound output from the TV’s optical jack.
When the TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theater receiver.
When the source is a digital component such as a DVD player / Blu-ray player / cable box / STB
(Set-Top Box) satellite receiver and you connected it to the TV via HDMI, you will only hear 2 CH
audio from the home theater receiver. If you want to hear 5.1 CH audio, connect the digital audio
out jack from your DVD / Blu-ray player / cable box / STB satellite receiver directly to an amplifier or
home theater.
OPTICAL
Optical Cable (Not Supplied)
Digital Audio System
[PE8000-ZD]BN68-04073A-03.indb 8 2012-05-11 �� 11:02:59

English - 9
Connecting to a PC
Using an HDMI cable or an HDMI to DVI cable
✎Your PC may not support an HDMI connection.
✎Use your PC speakers for audio.
The optimal resolution is 1920 X 1080 @ 60 Hz. See the Display Resolution page for all available
resolutions (page 53).
✎NOTE
•For an HDMI to DVI cable connection, you must use the HDMI IN 1 (DVI) jack.
•For PCs with DVI video out jacks, use an HDMI to DVI cable to connect the DVI out on the PC to
the HDMI IN 1 (DVI) jack on the TV. Use the PC's speakers for audio.
•PC (D-Sub) input is not supported.
AUDIO OUT
DVI OUT
HDMI OUT
(HDD 5V 1A)
HDMI IN
1 (DVI)
(
HDD 5V 1A)
HDMIIN
1 (DVI)
HDMI IN
1 (DVI)
Audio Cable (Not Supplied)
HDMI Cable (Not Supplied)
HDMI to DVI Cable (Not Supplied)
[PE8000-ZD]BN68-04073A-03.indb 9 2012-05-11 �� 11:03:00

English - 10
Connecting to a Service Cable
SERVICE: Connector for service only.
The Evolution Kit Slot (Kit Sold Separately)
This socket is designed to accept an extension device called the Evolution Kit. The Evolution Kit enables
the TV to run a variety of the latest applications for a better user experience.
The Evolution Kit, which may not be available depending on the product, will be sold separately in 2013 or
later.
[PE8000-ZD]BN68-04073A-03.indb 10 2012-05-11 �� 11:03:00

English - 11
Connecting to a Network
You can set up your TV so that it can access SMART TV applications through your local area network
(LAN) using a wired or wireless connection.
✎After you have “physically” connected your TV to your network, you must configure the network
connection to complete the process. You can configure the connection during the Initial Setup
process (see page 15) or after the Initial Setup process, through the TV’s menu.
Network Connection - Wireless
You can connect your TV to your local area network (LAN) through a standard wireless router or modem.
The LAN Port on the Wall
LAN Cable (Not Supplied)
Wireless IP Router or Modem
that has a DHCP Server
This TV supports the IEEE 802.11a/b/g and n communication protocols. Samsung recommends using
IEEE 802.11n. When you play video over a network connection, the video may not play smoothly.
Most wireless network systems incorporate a security system that requires devices that access the
network through an access point (an AP), a wireless IP router, or wireless modem to transmit an encrypted
security code called an access key.
Your TV is compatible with the following security protocols:
•Authentication Mode: OPEN, SHARED, WPAPSK, WPA2PSK
•Encryption Type: WEP, TKIP, AES
If you select Pure High-throughput (Greenfield) 802.11n mode and the Encryption type is set to WEP or
TKIP on your AP or wireless router, Samsung TVs will not support a connection in compliance with new
Wi-Fi certification specifications.
[PE8000-ZD]BN68-04073A-03.indb 11 2012-05-11 �� 11:03:01

English - 12
Network Connection - Wired
There are three main ways to connect your TV to your network using cable, depending on your network
setup. They are illustrated below:
The Modem Port on the Wall TV Rear Panel
LAN Cable (Not Supplied)Modem Cable (Not Supplied)
External Modem
(ADSL / VDSL / Cable TV)
The Modem Port on the Wall TV Rear Panel
Modem Cable
(Not Supplied)
LAN Cable
(Not Supplied)
External Modem
(ADSL / VDSL / Cable TV) IP Router that has a
DHCP Server
LAN Cable
(Not Supplied)
The LAN Port on the Wall TV Rear Panel
LAN Cable (Not Supplied)
✎The TV does not support network speeds less than or equal to 10Mbps.
✎Use Cat 5 (STP Type*) cable for the connection. (*Shielded Twisted Pair)
[PE8000-ZD]BN68-04073A-03.indb 12 2012-05-11 �� 11:03:01

English - 13
The Standard Remote Control
Installing batteries (Battery size: AAA)
Match the polarity of the batteries to the symbols in the battery compartment.
1
3
2
✎Your TV also comes with a Smart Touch Control. For information about the Smart Touch Control, see
page 24.
✎NOTE
•Install the batteries so that the polarity of the batteries (+/-) matches the illustration in the battery
compartment.
•Use the remote control within 23 feet of the TV.
•Bright light may affect the performance of the remote control. Avoid using it near fluorescent lights
or neon signs.
•The color and shape of the remote may vary depending on the model.
[PE8000-ZD]BN68-04073A-03.indb 13 2012-05-11 �� 11:03:02

English - 14
The Standard Remote Control Buttons
✎This remote control has Braille points on the Power, Channel, and Volume buttons and can be used
by visually impaired persons.
HISTORY
CAMERA
Turns the TV on and off.
Displays and selects the available video
sources. (page 19)
Press to select additional digital
channels being broadcast by the same
digital station. For example, to select
channel ‘54.3’, press ‘54’, then press
‘-’ and ‘3’.
Adjusts the volume.
Opens the OSD (Menu).
Displays channel lists on the screen.
Quickly select frequently used functions.
Use this button in a specific feature.
Returns to the previous menu.
Use these buttons according to the
directions on screen.
Use these buttons in a specific feature.
For details, refer to the e-Manual.
Moves the cursor, selects the on-screen
menu items, and changes the values
seen on the menu.
Turns the remote control light on or
off. When on, the buttons become
illuminated for a moment when pressed.
(Using the remote control with this button
set to On will reduce the battery usage
time.)
Return to the previous channel.
Changes channels.
Displays a list of recently used functions.
You can select a function again easily
and quickly.
Displays information on the TV screen.
Exits the menu.
Family Story: Connect to the Family
Story application. See e-Manual chapter
Advanced Features →Family Story.
SEARCH: Starts recommended search
word and search function. See e-Manual
chapter Advanced Features →Search.
CAMERA: Connect to camera
application.
SUPPORT: Lets you use various
support functions including th e-Manual.
(page 43)
GUIDE: Displays the EPG (Electronic
Program Guide).
X : Turns the 3D image on or off. See
e-Manual chapter Advanced Features
→3D.
Cuts off the sound temporarily.
Brings up the Smart Hub applications.
See e-Manual chapter Advanced
Features →Smart Hub.
Gives direct access to channels.
[PE8000-ZD]BN68-04073A-03.indb 14 2012-05-11 �� 11:03:02

English - 15
Configuring the Basic Settings in Initial Setup
When you turn the TV on for the first time, a sequence of screens and on-screen prompts will assist you in
configuring the TV’s basic settings. Plug the power cord into a wall outlet, and then press the Pbutton to
turn on the TV.
✎Use the standard remote to run the Initial Setup.
✎Setup is available only when the input source is set to TV. See "Changing the Input Source" (page
19).
✎To return to the previous step in the Setup sequence, select Previous.
✎If you are not using a cable box or satellite box, make sure you have connected the TV to an antenna
or cable connection before you turn on the TV. See page 5 for instructions.
✎If you want to configure a wired network connection during Setup, make sure you've connected a
LAN cable to your TV. See pages 12 for instructions. If you want to configure a wireless network
connection during Setup, make sure your wireless modem or router is on and working.
1
Menu Language:
Select a Language.
After you press the Pbutton, the Start screen appears. Select Next
to continue. The Menu Language screen appears. Select the menu
language you want using your remote, and then select Next. The TV will
display on-screen menus using the language you select beginning with
the next step in the Setup process.
2
Use Mode: Select
the Home Use
Mode.
On the Use Mode screen, select the Home Use mode using your
remote, and then select Next. The Network Settings screen appears.
✎Store Demo is for retail environments only. If you select Store
Demo, some functions will not work, and the TV will reset all
functions to their factory default after a certain period of time. For
more information about Store Demo, go to the end of this section.
3
Network Settings:
Configure the
network settings
✎To configure
later, select Skip.
You can set up
the network
connection later
using the on-
screen Network
menu.
To configuring your network settings, select Next using your remote, and
then go to 3A - Wireless Network or 3B - Wired Network on the next
page.
If you do not know your network configuration information or want to
configure the settings later, or do not have a network, select Skip, and
then go to 5 - Auto Program (1) on page 17.
To configure network settings later, refer to “Setting up the Wired or
Wireless Network” in the e-Manual or see the Network Connection
sections in this manual (pages 11 and 41).
[PE8000-ZD]BN68-04073A-03.indb 15 2012-05-11 �� 11:03:02

English - 16
3 aWireless Network 1. The TV searches for and then displays all the wireless networks
within range. When done, it displays a list of the networks. In the list
of networks, move the highlight to select a network, and then select
Next. If the selected network requires a Security Key, the Security
Key screen appears.
✎If you have a WPS(PBC) compatible router, select WPS(PBC)
instead, and then follow the directions on the screen. When
done, go to Step 4.
2. Enter your network security key or WPS PIN using your remote.
✎Enter numbers and letters using your remote.
•If you are using the standard remote, you can enter numbers
by pressing the number buttons on the remote.
•To enter a letter, move the highlight to the letter, and then
select it. You can enter numbers in the same fashion if you
choose.
✎To display capital letters (or redisplay small letters if capital letters
are displayed), select Caps or Shift.
✎To display symbols and punctuation, select 1F. To redisplay
letters, select 1Fagain.
3. When done, select Next if you have entered a security key or WPS
PIN if you have entered a WPS PIN.
4. The TV checks the wireless connection. If the connection is
successful, the You are connected to the Internet. If you have any
problems using online services, please contact your Internet
Service Provider. message appears. Select Next, and then go to 4
Software Upgrade Step.
✎If the connection fails, select Previous, repeat Step 1 and 2,
carefully re-enter your security key or WPS PIN, then repeat
Steps 3 and 4. If it fails again, select Next on the “Connection
Failed” screen, and then go to 5 - Auto Program (1) on the next
page. Configure your network later through Network Settings
in the TV’s Menu. For more information, refer to “Setting up the
Wired or Wireless Network” in the e-Manual or see the Network
Connection sections in this manual (pages 11 and 41).
3 bWired Network The TV checks the network connection, then displays the You are
connected to the Internet. If you have any problems using online
services, please contact your Internet Service Provider.message
appears. Select Next. The Software Upgrade screen appears.
[PE8000-ZD]BN68-04073A-03.indb 16 2012-05-11 �� 11:03:02

English - 17
4
Software Upgrade:
Upgrading the
software to the latest
version
✎To update later,
select Skip.
When Network Settings is complete, your TV will check for a new
software version automatically. If new software is available, the TV
downloads and installs the new software. When the download is
complete, select Next.
✎If you want to upgrade later, select Skip. For more information, refer
to Software Update (Preference Features →Support Menu) in the
e-Manual.
✎This may take some time, depending on your network status.
✎You can only upgrade software if your TV has an active network
connection.
✎If no new update software is available, a no new updates message
appears on the screen. Select OK.
5
Auto Program (1):
Select where your
TV signal comes
from.
Select the appropriate option for your TV using your remote, and then
select Next.
•Yes, I need to.: Select if you have an antenna or a cable connection
without a set-top box. If you select this option, go to 6 - Auto
Program (2) Step.
•No, I don’t need to.: Select if you have a satellite or cable set-top
box. You do not need to run Auto Program. If you select this option,
go to 8 - Clock on the next page.
6
Auto Program (2):
Select the search
options.
1. Select Air or Cable using your remote. A check appears on your
selection. When done, select Next. You can check both if you have
both connected.
2. When done, select Next.
[PE8000-ZD]BN68-04073A-03.indb 17 2012-05-11 �� 11:03:02

English - 18
7
Auto Program (3):
Channel
memorization
Channel memorization stars. Channel memorization can take up to 45
minutes, depending on your cable system.
For more information, refer to Auto Program (Channel Menu →
Memorizing Channels) in the e-Manual.
✎Select Stop at any time to halt the memorization process.
8
Clock: Set the Clock Select Auto or Manual, and then select Next.
✎If you selected No, I don’t need to. in 5 - Auto Program (1), you can
only set the current time and date manually, using your remote.
Auto
If you selected Auto, the TV will automatically download the correct time
from a digital channel. Depending on the country, the Time Zone screen
will appear. Select your Time Zone, and then select Next.
Manual
If you selected Manual, you’ll go to the Clock screen. Select Date or
Time. You can set the current date and time using your remote. When
done setting the Date and Time, select Next.
9
Voice and Motion
Control: Setting the
Voice and Motion
Control function.
You can turn the Voice and Motion Control function on or off. Select Off
or On, and then select Next.
10
Setup Complete Review the Setup data, and then select Close to finish.
✎The completed settings are displayed.
11
Set the Universal
Remote
1. Turn on the POWER button on the bottom of the IR Blaster, and then
press the PAIRING button.
2. Select Yes to start the Universal Remote Setup.
✎For more detailed information about the Universal Remote Setup,
refer to "Setting up the Universal Remote Control" section in the
manual (page 31).
If You Want to Rerun Setup...
Menu →System →Setup
If You Want to Turn the Store Demo Off.
•To cancel Store Demo, bring up the Function menu using the Controller, push the Controller to the
right (to Source (s)) and hold for more than 5 seconds. See page 22 for information about the
Controller.
•Select System - Setup (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-
0”. If you want to change the PIN number, use the Change PIN function.
[PE8000-ZD]BN68-04073A-03.indb 18 2012-05-11 �� 11:03:02

English - 19
Changing the Input Source
Source
™→ Source
When you are watching TV and you want to watch a movie on your DVD player or Blu-ray player or switch
to your cable box or STB satellite receiver, you need to change the Source.
■TV / HDMI1/DVI / HDMI2 / HDMI3 / AV / Component
1. Press the ™button on your remote. The Smart Hub screen appears.
2. Select Source. The Source screen appears.
3. Select a desired external input source.
✎Alternatively, you can access the Source screen by selecting the SOURCEsbutton on your
standard remote or selecting Source with the Smart Touch Control (see page 24).
✎You can only choose external devices that are connected to the TV. In the displayed Source list,
connected inputs are highlighted.
How to Use Edit Name
Edit Name lets you associate a device name to an input source. To access Edit Name, open the Tools
menu when the Source list is displayed. The following selections appear under Edit Name:
■VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI
PC / DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA: Select an input jack, and then select the
name of the device connected to that jack from the list that appears. For example, if you have your Blu-
ray player attached to HDMI IN 2, select Blu-ray for that input.
✎If you connect a PC to the HDMI IN 1 (DVI) port with an HDMI cable, assign PC to HDMI1/DVI in
Edit Name.
✎If you connect a PC to the HDMI IN 1 (DVI) port with an HDMI to DVI cable, assign DVI PC to
HDMI1/DVI in Edit Name.
✎If you connect an AV device to the HDMI IN 1 (DVI) port with an HDMI to DVI cable, assign DVI
Devices to HDMI1/DVI in Edit Name.
Information
You can see detailed information about the selected external device.
Refresh
If the external devices are not displayed in the Source list, open the Tools menu, and then select Refresh.
The list will display all connected devices.
✎Alternatively, you can refresh the Source list by selecting ausing your remote.
[PE8000-ZD]BN68-04073A-03.indb 19 2012-05-11 �� 11:03:03

English - 20
Auto Run Data Service (Brasil Only)
Allows the user to use information (text, still images, graphics, documents, Software, etc.) transmitted via
broadcast media. If the channel you are currently watching provides data service. you can enjoy a variety of
data services.
Menu →System →Auto Run Data Service
Auto Run Data Service (On / Off)
Sets whether or not to Automatically run date service. Auto Run Data Service automatically runs data
service without user intervention.
1. If Auto Run Data Service is On, The data serive will automatically run with loading banner.
2. Press the OK(E) button, the data service screen will be displayed.
3. Select a desired option by using your remote on the data service screen. The selected service will be
started.
4. If you select Exit using your remote, data service will be closed.
✎If any other secondary function is under way, Auto Run Data Service may not work Provided data
service information may vary depending on broadcast.
Main Data Service buttons and their functions
▲/ ▼/ ◄ / ►Moves the Auto Run Data Service menu up, down, left and right.
OK Runs a selected item.
EXIT Stops a running Auto Run Data Service.
✎Operations may differ depending on the service provider.
[PE8000-ZD]BN68-04073A-03.indb 20 2012-05-11 �� 11:03:03