Samsung PS50A766T1W User manual

imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/global/register
Model Serial No.
BN68-01757B-00
Contact SAMSUNG WORLD-WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Plasma TV
user manual
Country Customer Care Centre Web Site
AUSTRIA 0810 - SAMSUNG(7267864, € 0.07/min) www.samsung.com/at
BELGIUM 02 201 2418 www.samsung.com/be
CZECH REPUBLIC 800 - SAMSUNG (800-726786) www.samsung.com/cz
Samsung Zrt., česká organizační složka, Oasis Florenc, Sokolovská394/17, 180 00, Praha 8
DENMARK 8 - SAMSUNG(7267864) www.samsung.com/dk
EIRE 0818 717 100 www.samsung.com/ie
ESTONIA 800-7267 www.samsung.ee
FINLAND 30 - 6227 515 www.samsung.com/fi
FRANCE 3260 SAMSUNG(7267864, € 0,15/Min)
0825 08 65 65 (€ 0.15/Min) www.samsung.com/fr
GERMANY 01805 - SAMSUNG(7267864, € 0.14/Min) www.samsung.de
HUNGARY 06 - 80 - SAMSUNG(7267864) www.samsung.com/hu
ITALIA 800 - SAMSUNG(7267864) www.samsung.com/it
KAZAKHSTAN 8-10-800-500-55-500 www.samsung.com/kz_ru
KYRGYZSTAN 00-800-500-55-500
LATVIA 8000-7267 www.samsung.com/lv
LITHUANIA 8-800-77777 www.samsung.lt
LUXEMBURG 02 261 03 710 www.samsung.com/lu
NETHERLANDS 0900 - SAMSUNG(7267864, € 0.10/Min) www.samsung.com/nl
NORWAY 3 - SAMSUNG(7267864) www.samsung.com/no
POLAND 0 - 801 - 1SAMSUNG(172678)
022 - 607 - 93 - 33 www.samsung.com/pl
PORTUGAL 808 20 - SAMSUNG(7267864) www.samsung.com/pt
RUSSIA 8-800-555-55-55 www.samsung.ru
SLOVAKIA 0800 - SAMSUNG(7267864) www.samsung.com/sk
SPAIN 902 - 1 - SAMSUNG (902 172 678) www.samsung.com/es
SWEDEN 075 - SAMSUNG(726 78 64) www.samsung.com/se
Switzerland 0848 - SAMSUNG(7267864, CHF 0.08/min) www.samsung.com/ch
TADJIKISTAN 8-10-800-500-55-500
Turkey 444 77 11 www.samsung.com/tr
U.K 0845 SAMSUNG(7267864) www.samsung.com/uk
UKRAINE 8-800-502-0000 www.samsung.ua
UZBEKISTAN 8-10-800-500-55-500 www.samsung.com/kz_ru
BN68-01757B-Eng.indb 1 2008-08-29 오후 3:29:49

English - 2
© 2008 Samsung Electronics Co., Ltd. All rights reserved.
User Instructions
Screen Image retention
Do not display a still image (such as on a video game or when hooking up a PC to this PDP) on the plasma monitor panel for
more than 2 hours as it can cause screen image retention. This image retention is also known as “screen burn”. To avoid such
image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.
Height
The PDP can normally operate only under 2000m in height. It might abnormally function at a place over 2000m in height so do
not install and operate there.
Heat on the top of the PDP TV
The top side of the product may be hot after long period of use as heat dissipates from the panel through the vent hole in the
upper part of the product. This is normal and does not indicate any defect or operation failure of the product. However, children
should be prevented from touching the upper part of the product.
The product is making a ‘cracking’ noise.
A ‘cracking’ noise may occur when the product contracts or expands due to a change of surrounding environment such as
temperature or humidity. This is normal and not a defect of the unit.
Cell Defects
The PDP uses a panel consisting of 1,230,000(SD-level) to 3,150,000(HD-level) pixels which require sophisticated technology
to produce. However, there may be few bright or dark pixels on the screen. These pixels will have no impact on the
performance of the product.
Avoid operating the TV at temperatures below 5°C(41°F)
A still image displayed too long may cause permanent damage to the PDP Panel.
Watching the PDP TV in 4:3 format for a long period of time may leave traces of borders displayed on
the left, right and centre of the screen caused by the difference of light emission on the screen. Playing a
DVD or a game console may cause similar effect to the screen. Damages caused by the above effect are
not covered by the Warranty.
Afterimage on the Screen.
Displaying still images from Video games and PC for longer than a certain period of time may produce partial afterimages.
To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.
Warranty
- Warranty does not cover any damage caused by image retention.
- Burn-in is not covered by the warranty.
Installation
Be sure to contact an authorized service centre, when installing your set in a location with heavy dust, high or low
temperatures, high humidity, chemical substance and where it operates continually such as the airport, the train station etc.
Failure to do so may cause a serious damage to your set.
Digital TV (DVB-T) Notice
1. FUNCTIONALITIES RELATED TO DIGITAL TV (DVB) ARE ONLY AVAILABLE IN COUNTRIES OR AREAS WHERE
DVB-T (MPEG2 AND MPEG4 AVC) DIGITAL TERRESTRIAL SIGNALS ARE BROADCAST. DVB-T is the European
consortium standard for the broadcast transmission of digital terrestrial television. Please check with your local dealer
about the availability of DVB-T service in your area.
2. Although this TV set meets the current DVB-T standards as of [August, 2008], compatibility with future DVB-T digital
terrestrial broadcast cannot be guaranteed.
3. Some Digital TV functions may not be available or operate correctly in some countries or regions.
4. For more information, please contact your local SAMSUNG customer care centre.
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG
customer care centre. (See back cover for more informations.)










BN68-01757B-Eng.indb 2 2008-08-29 오후 3:29:49

Connecting and Preparing Your TV
User Instructions .................................................................2
Checking Parts ....................................................................4
Using the Stand-Base .........................................................4
How to assemble the Stand-Base
(depending on the model) ...................................................4
Viewing the Control Panel ...................................................5
Viewing the Connection Panel.............................................6
Remote Control ...................................................................8
Installing Batteries in the Remote Control ...........................9
Switching On and Off...........................................................9
Placing Your Television in Standby Mode............................9
Viewing the Menus ............................................................10
Using the TOOLS Button...................................................10
Using the Wheel button .....................................................10
Plug & Play Feature ..........................................................11
Channel Control
Storing Channels and channel .........................................11
Managing Channels ..........................................................15
Picture Control
Changing and Resetting the Picture Settings....................16
Viewing Picture-in-Picture .................................................20
Setting up the TV with your PC .........................................20
PC Display.........................................................................21
Sound Control
Changing the Sound Standard..........................................22
Selecting the Sound Mode ................................................23
Function Description
Conguring the Setup Menu..............................................24
Setting the Time ................................................................27
Network Connection ..........................................................28
Network Setup...................................................................30
Source List / Edit Name.....................................................32
Product Guide ...................................................................32
WISELINK Pro
Connecting a USB Device.................................................33
Using the WISELINK Pro Function....................................34
Using and Sorting Photo List.............................................36
Viewing a Photo or Slide Show .........................................37
Using and Sorting the Music List.......................................39
Playing a Music .................................................................40
Using and Sorting the Movie List.......................................41
Playing a Movie File ..........................................................42
Deleting the Photo/Music/Movie File .................................43
Picture/Music Settings Using WISELINK Pro....................44
Using the Setup Menu.......................................................44
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
WISELINK Pro-DLNA
Setting the DLNA Network.................................................45
Installing the DLNA Application .........................................45
Using the DLNA Application ..............................................47
Using the DLNA Function ..................................................50
Content Library
Activating the Content Library ...........................................51
Using the Content Library..................................................52
Using Additional Content Using External USB Memory
Storage..............................................................................53
About Anynet+
Connecting Anynet+Devices ............................................54
Setting Up Anynet+............................................................55
Scanning and Switching between Anynet+ Devices..........55
Recording ..........................................................................56
Listening through a Receiver (Home theater) ...................57
Troubleshooting for Anynet+............................................57
InfoLive
Using InfoLive....................................................................58
Using the Weather Service................................................59
Using the News Service ....................................................59
Using the Stock Service ....................................................60
InfoLive Setup ...................................................................61
Recommendations for Use
Teletext Feature.................................................................62
Wall Mount Kit Specications (VESA) ...............................63
Auto Wall-Mount Adjustment (Sold separately) ................64
Preparing before installing Wall- Mount on the wall ..........65
Securing the TV to the Wall...............................................65
Troubleshooting.................................................................66
Specications ....................................................................67
Additional Terms of Service...............................................68
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
English
Contents
N O T
Symbol Press Note One-Touch Button TOOLS
English - 3
BN68-01757B-Eng.indb 3 2008-08-29 오후 3:29:50

English - 4
Connecting and Preparing Your TV
Using the Stand-Base
Two or more people should carry the PDP. Never lay the PDP on the floor
because of possible damage to the screen. Always keep the PDP upright.
The PDP can rotate 20 degrees in right and left directions.
N
N
How to assemble the Stand-Base (depending on the model)
Using the 6 screws for securing the stand base and the monitor, firmly
attach the monitor to the stand base.
(The exterior of the set may be different than the picture.)
In case of installing your TV on the wall, close the
cover (1) on the stand-base connection part using two
screws for hiding.
Warning
Firmly secure the stand to the TV
before moving it, as the stand may
fall and could cause serious injury.
Two or more people should carry the TV.
Never lay the TV on the floor because of
possible damage to the screen.
Always store the TV upright.
N
-20° ~ 20°
Checking Parts
Owner’s Instructions Remote Control/
AAA Batteries
Power Cord Cloth-Clean Warranty Card/
Safety Guide Manual
(Not available in all locations)
Cover-Bottom / Screws (2ea)
(PS50A766)
Holder-Ring (4ea)
(Refer to page 65)
Program CD Ferrite Core for Power
Cord (2ea)
Ferrite Core (Power Cord)
The ferrite core is used to shield the cable from interference. When connecting a cable, open the ferrite
core and clip it around the cable near the plug.
N
BN68-01757B-Eng.indb 4 2008-08-29 오후 3:29:53

English - 5
Viewing the Control Panel
1 SOURCE
Toggles between all the available input sources
(TV, Ext1, Ext2, AV, S-Video, Component, PC, HDMI1,
HDMI2/DVI, HDMI3, HDMI4, USB, DLNA).
In the on-screen menu, use this button as you would
use the ENTER button on the remote control.
2 MENU
Press to see an on-screen menu of your TV’s features.
3
– +
Press to decrease or increase the volume. In the on-screen
menu, use the – + buttons as you would use the ◄
and ► buttons on the remote control.
4
C/P.
Press to change channels. In the on-screen menu, use
the C/P. buttons as you would use the ▲ and ▼
buttons on the remote control.
5 POWER INDICATOR
Blinks and turns off when the power is on and lights up in
stand-by mode.
6 REMOTE CONTROL SENSOR
Aim the remote control towards this spot on the TV.
N
7 SPEAKERS
8 ( POWER)
Touch the silver sensor below the ( ) mark to turn the TV
on and off.
The product colour and shape may vary depending on the model. N
Front Panel buttons
Touch each button to
operate.
Silver sensor
BN68-01757B-Eng.indb 5 2008-08-29 오후 3:29:54

English - 6
Viewing the Connection Panel
Whenever you connect an audio or video system to your set, ensure that all elements are switched off.
When connecting an external device, match the colour of the connection terminal to the cable.
N
N
Rear Panel
Cable Television
Network
or
or
or
1
5 7 96
0
83 4
The product colour and shape may vary depending on the model. N
1 POWER IN
Connect the supplied power cord.
2 COMPONENT IN
Audio (AUDIO L/R) and video (Y/PB/PR) inputs for
Component.
3 LAN
Connect a LAN cable to this port to connect to the Network.
4 PC IN(PC) / AUDIO
Connect to the video and audio output jack on your PC.
5 EXT 1, EXT 2
Inputs or outputs for external devices, such as VCR, DVD,
video game device or video disc players.
Input/Output Specification
Connector Input Output
Video Audio(L/R) RGB Video + Audio(L/R)
EXT 1 ✔✔✔Only TV or DTV output is
available.
EXT 2 ✔✔Output you can choose.
6 DIGITAL AUDIO OUT (OPTICAL)
Connect to a Digital Audio Component.
7 AUDIO OUT(AUDIO R/L)
Connect RCA audio signals from the TV to an external
source, such as Audio equipment.
8 SERVICE
Connector for service.
9 HDMI IN 1, 2, 3
- No additional Audio connection is needed for an HDMI to
HDMI connection.
- When using an HDMI/DVI cable connection, you must
use the HDMI IN 2 jack.
What is HDMI?
- High Definition Multimedia interface allows the
transmission of high definition digital video data and
multiple channels of digital audio.
- The HDMI/DVI terminal supports DVI connection to
an extended device with the appropriate cable (not
supplied). The difference between HDMI and DVI is
that the HDMI device is smaller in size, has the HDCP
(High Bandwidth Digital Copy Protection) coding feature
installed, and supports multi - channel digital audio.
DVI IN(HDMI2) AUDIO L/R
DVI audio outputs for external devices.
0 ANT IN
75Ω Coaxial connector for Aerial/Cable Network.
Supported modes for HDMI/DVI and Component
480i 480p 576i 576p 720p 1080i 1080p
HDMI/DVI 50Hz X X X O O O O
HDMI/DVI 60Hz XOX X O O O
Component OOOOOOO
N
2
BN68-01757B-Eng.indb 6 2008-08-29 오후 3:29:58

English - 7
1 COMMON INTERFACE Slot
Insert CI (Common Interface) card into the slot.
(refer to page 26)
− When not inserting CI CARD in some channels, Scramble
Signal is displayed on the screen.
− The pairing information containing a telephone number, CI
CARD ID, Host ID, and other information will be displayed
in about 2~3 minutes. If an error message is displayed,
please contact your service provider.
− When the channel information configuration has finished,
the message Updating Completed is displayed, indicating
that the channel list is now updated.
Insert the CI-Card in the direction marked on it.
2 HDMI IN 4
Connect to the HDMI jack of a device with HDMI output.
3 WISELINK PRO
Connect a USB mass storage device to view and play photo
files (JPEG), audio files (MP3) and movie files.
You can connect to SAMSUNG’s network wirelessly.
4 S-VIDEO or VIDEO / AUDIO L/R
Video (S-Video or Video) and audio inputs for external
devices, such as a camcorder or VCR.
N
5 HEADPHONES JACK
You can connect a set of headphones if you wish to
watch a television programme without disturbing the
other people in the room.
Prolonged use of headphones at a high volume may
damage your hearing.
N
The product colour and shape may vary depending on the model. N
Side Panel
or
4
5
3
2
1
4
BN68-01757B-Eng.indb 7 2008-08-29 오후 3:30:00

English - 8
Remote Control
You can use the remote control up to a distance of about 23 feet from the TV.
The performance of the remote control may be affected by bright light. N
1 POWER button
(turns the TV on and off)
2 Selects the TV mode directly.
3 Number buttons for direct channel
access
4 One or more digit channel selection
5 Temporary sound switch-off
6 Available source selection
7 Volume increase
Volume decrease
8 Electronic Program Guide (EPG)
display
9 Use to quickly select frequently used
functions.
0 Control the cursor in the menu
! Use to see information on the
current broadcast
@ Use these buttons in the Channel
list and WISELINK, etc.
$ Press to select the optional display
and sound modes for sports, cinema
and games.
% Use these buttons in the Channel
list, WISELINK Pro and Anynet+.
^ ON/OFF
Press to backlight the buttons on the
remote. This function is convenient
for using at night or when the room
is dark. (Using the remote control
with the ON/OFF( ) light button set
to On will reduce the battery usage
time.)
& Previous channel
* Next channel
Previous channel
( Displays the main on-screen menu
) This function enables you to view
and play photo (JPEG) , audio
files (MP3) and movie files from an
external device.
a Returns to the previous menu
b Exit the on-screen menu
c Press to use the News, Stock
Market and Weather Forecast
information services available over
the network.
d Use this when connecting a
SAMSUNG DMA (Digital Media
Adapter) device through an HDMI
interface and switching to DMA
mode.
(The DMA button is optional.) For
more information on the operating
procedures, refer to the user manual
of the DMA. This button is available
when Anynet+(HDMI-CEC) is On
(see page 55)
e This function enables you to view
Content Library.
f Digital subtitle display
Teletext Functions
2 Exit from the teletext display
(depending on the model)
6 Teletext mode selection (LIST/
FLOF)
8 Teletext store
9 Teletext size
! Teletext reveal
@ Fastext topic selection
# Teletext display/mix both teletext
information and the normal
broadcast
& Teletext sub page
* P :Teletext next page
P :Teletext previous page
( Teletext index
a Teletext hold
b Teletext cancel
BN68-01757B-Eng.indb 8 2008-08-29 오후 3:30:01

English - 9
Installing Batteries in the Remote Control
1. Lift the cover at the back of the remote control upward as shown in the gure.
2. Install two AAA size batteries.
Make sure to match the ‘+’ and ‘–’ ends of the batteries with the diagram
inside the compartment.
3. Close the cover.
Remove the batteries and store them in a cool, dry place if you won’t be
using the remote control for a long time.
Using the remote control with the ON / OFF @ light button set to on will
reduce the battery usage time.
If the remote control doesn’t work, check the following:
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power outage or is the power cord unplugged?
5. Is there a special uorescent light or neon sign nearby?
N
Switching On and Off
The mains lead is attached to the rear of your set.
1. Plug the mains lead into an appropriate socket.
The standby indicator lights up on your set.
2. Press the POWERP button on your set.
You also can press the POWER
P
button or the TV button on the remote control to turn the TV on.
The programme that you were watching last is reselected automatically.
3. Press the numeric button (0~9) or channel up / down (< / >) button on the remote control or >C/P.
P
< button on your
set.
When you switch the set on for the very rst time, you will be asked to choose language in which the menus are to be
displayed.
4. To switch your set off, press the POWER
P
button again.
Placing Your Television in Standby Mode
Your set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful when you
wish to interrupt viewing temporarily (during a meal, for example).
1. Press the POWER
P
button on the remote control.
The screen is turned off and a red standby indicator appears on your set.
2. To switch your set back on, simply press the POWER
P
, numeric buttons (0~9), TV button or channel up / down (< / >)
button again.
Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example). It is best to
unplug the set from the mains and aerial.
N
N
N
N
N
N
N
N
N
BN68-01757B-Eng.indb 9 2008-08-29 오후 3:30:01

English - 10
Viewing the Menus
1. With the power on, press the MENU button. The main menu appears on the
screen. The menu’s left side has icons: Picture, Sound, Channel, Setup, Input,
Application.
2. Press the ▲ or ▼ button to select one of the icons. Then press the ENTER
E
button to access the icon’s sub-menu.
3. Press the EXIT button to exit.
The on-screen menus disappear from the screen after about one minute.
Using the TOOLS Button
You can use the TOOLS button to select your frequently used functions quickly and
easily. The Tools menu changes depending on which external input mode you are
viewing.
1. Press the TOOLS button. The Tools menu will appear.
2. Press the ▲ or ▼ button to select a menu, then press the ENTER
E
button.
3. Press the ▲ / ▼ / ◄ / ► / ENTER
E
buttons to display, change, or use the
selected items. For a more detailed description of each function, refer to the
corresponding page.
Anynet+ (HDMI-CEC): see page 54
Picture Size: see page 18
Picture Mode: see page 16
Sound Mode: see page 22
Sleep Timer: see page 27
SRS TS XT: see page 22
Energy Saving: see page 26
Dual l ll: see page 23
PIP: see page 20
Auto Adjustment: see page 20
•
•
•
•
•
•
•
•
•
•
Using the Wheel button
To increase the channel number, turn the wheel clockwise when the Channel
Display is displayed. To decrease the channel number, turn the wheel
counterclockwise.
To turn the volume up, turn the wheel clockwise when the Volume
Control window is displayed. To turn the volume down, turn the wheel
counterclockwise.
To move to a lower menu, turn the wheel clockwise when the menu Display is
displayed. To move to a higher menu, turn the wheel counterclockwise.
N



Mode : Standard
Cell Light : 7
Contrast : 95
Brightness : 45
Sharpness : 50
Colour : 50
Tint (G / R) : G50 / R50
Detailed Settings
Picture
Tools
Anynet+ (HDMI-CEC)
Picture Size : Auto Wide
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer : Off
SRS TS XT : Off
Energy Saving : Off
Dual l ll : Mono
U Move E Enter e Exit
BN68-01757B-Eng.indb 10 2008-08-29 오후 3:30:02

English - 11
Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and subsequently.
1. Press the POWER button on the remote control. The message Valitse
valikkokieli, myymälädemo, kanavat ja kellonaika. is displayed.
2. Press the ENTER
E
button, then Valitse kuvaruutuvalikon kieli. menu is
automatically displayed. Press the ENTER
E
button.
3. Select the appropriate language by pressing the ▲ or ▼ button. Press the
ENTER
E
button to conrm your choice.
4. Press the ◄ or ► button to select Store Demo or Home Use, then the ENTER
E
button.
We recommend setting the TV to Home Use mode for the best picture in your home environment.
Store Demo mode is only intended for use in retail environments.
If the unit is accidentally set to Store Demo mode and you want to return to Home Use (Standard): Press the Volume
button on the TV. When the volume OSD is displayed, press and hold the MENU button on the TV for 5 seconds.
The Screen Saver is activated if there is no remote control key input for longer than 1 minute while Plug & Play is
running.
The Screen Saver is activated if there is no operating signal for longer than 15 minutes.
5. Press the ENTER
E
button. Select the appropriate country by pressing the ▲ or ▼ button. Press the ENTER
E
button to
conrm your choice.
6. Press the ▲ or ▼ button to select the channel source to memorize. Press the ENTER
E
button to select Start.
Digital & Analogue: Digital and Analogue channels.
Digital: Digital channels.
Analogue: Analogue channels.
7. Press the ▲ or ▼ button to memorize the channels of the selected connection, then press the ENTER
E
button.
Air: Air antenna signal.
Cable: Cable antenna signal.
The channel search will start and end automatically.
Press the ENTER
E
button at any time to interrupt the memorization process.
After all the available channels are stored, the message Set the Clock Mode. is displayed.
8. Press the ENTER
E
button. Press the ▲ or ▼ button to select Auto, then Press the ENTER
E
button.
If you select Manual, Set current date and time is displayed. (See page 27)
If you have received a digital signal, the time will be set automatically. If
not, see page 27 to set the clock.
9. The message Enjoy your viewing is displayed. When you have nished, press
the ENTER
E
button.
If you want to reset this feature...
1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select
Setup, then press the ENTER
E
button.
2. Press the ENTER
E
button again to select Plug & Play.
3. Enter your 4 digit PIN number. The default PIN number of a new TV set is
‘0-0-0-0’.
If you want to change PIN number, refer to 23 page.
The Plug & Play feature is only available in the TV mode.
N
N
N
N
N
N
N
N
N
N
N
N
N
N
Channel Control
Storing Channels and channel
Country
Analogue Channel: You can change the country for analogue channels.
Digital Channel: You can change the country for digital channels.
The PIN number input screen appears. Enter your 4 digit PIN number.
❑


N
Setup
Plug & Play  ►
Language : English
Time
Network Selection : Cable
Wireless Network Setup
Cable Network Setup
Child Lock : On
Change PIN
Channel
Country  ►
Auto Store
Manual Store
Full Guide
Mini Guide
Default Guide : Mini Guide
Channel List
Channel Mode : Added Ch.
Plug & Play
Valitse valikkokieli, myymälädemo, kanavat ja kellonaika.
OK
E Hyväksy
BN68-01757B-Eng.indb 11 2008-08-29 오후 3:30:02

English - 12
Auto Store
You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated
programme numbers may not correspond to actual or desired programme numbers.
Digital & Analogue: Digital and Analogue channels.
Digital: Digital channels.
Analogue: Analogue channels.
You can memorize the channels of the selected connection.
Air: Air antenna signal.
Cable: Cable antenna signal.
Scans for all channels with active broadcast stations and stores them in the TV’s memory.
If you want to stop Auto Store, press the ENTER
E
button.
The Stop Auto Store? message will be displayed.
Select Yes by pressing the ◄ or ► button, then press the ENTER
E
button.
If a channel is locked using the Child Lock function, the PIN input window appears.
Digital & Analogue / Digital
The update procedures differ depending on the selected Country.
Update the channel list by selecting an appropriate option.
When the Country was set to Finland
Cable: Scans cable channels.
Air: Scans aerial channels.
This product cannot scan both cable and aerial channels at the sametime.
When it has nished, the number of scanned services will be displayed.
The existing favourite channel list will not be deleted when the channel list is updated.
When the Country was set to Sweden, or Denmark
When selecting Cable:
Frequency: Displays the frequency for the channel. (Differs in each country)
Modulation: Displays available modulation values.
Symbol Rate: Displays available symbol rates.
Network ID: Displays the network identication code.
Press the red button to start the scan for digital services. When it has nished, channels are updated in the channel list.
When selecting Air:
Press the ENTER
E
button to select Start.
Manual Store
Scans for a channel manually and stores it in the TV’s memory.
If a channel is locked using the Child Lock function, the PIN input window appears.
Digital Channel
Manual store for digital channels.
When the Country was set to Finland
Press the ▲ or ▼ button to select Cable or Air, then press the ENTER
E
button.
When selecting Cable:
Frequency: Displays the frequency for the channel. (Differs in each country)
Modulation: Displays available modulation values.
Symbol Rate: Displays available symbol rates.
Press the ENTER
E
button to start the scan for digital services.
When it has nished, channels are updated in the channel list.
When selecting Air:
Channel: Channel “21” to “69” in sequence are displayed (depending on the country)
Frequency: The frequency available in the Channel group is displayed.
Bandwidth: The available bandwidths are 8 MHz.
Press the ENTER
E
button to start the scan for digital services.
When it has nished, channels are updated in the channel list.
❑
•
•
•
•
•
N
N
N
N
N

•
-
-
N
N
N
•
N
-
-
-
-
N
❑
N
N

•
N
-
-
-
N
-
-
-
BN68-01757B-Eng.indb 12 2008-08-29 오후 3:30:02

English - 13
When the Country was set to Sweden, Denmark, or Norway
Channel: Channel “21” to “69” in sequence are displayed (depending on the country)
Frequency: The frequency available in the Channel group is displayed.
Bandwidth: The available bandwidths are 8 MHz.
Press the ENTER
E
button to start the scan for digital services.
When it has nished, channels are updated in the channel list.
Analogue Channel
Manual store for analogue channel.
Programme (Programme number to be assigned to a channel): Sets the programme number using the ▲, ▼ or number
(0~9) buttons.
ColourSystem→Auto/PAL/SECAM/NTSC4.43: Sets the colour system value using the ▲ or ▼ button.
Sound System → BG / DK / I / L: Sets the sound system value using the ▲ or ▼ button.
Channel (When you know the number of the channel to be stored): Press the ▲ or ▼ button to select C (Air channel) or S
(Cable channel). Press the ► button, then press the ▲, ▼ or number (0~9) buttons to select the required number.
You can also select the channel number directly by pressing the number (0~9) buttons.
If there is abnormal sound or no sound, reselect the sound standard required.
Search (When you do not know the channel numbers): Press the ▲ or ▼ button to start the search. The tuner scans the
frequency range until the rst channel or the channel that you selected is received on the screen.
Store (When you store the channel and associated programme number): Set to OK by pressing the ENTER
E
button.
Channel mode
P (Programme mode): When completing tuning, the broadcasting stations in your area have been assigned to position
numbers from P00 to P99. You can select a channel by entering the position number in this mode.
C (Air channel mode): You can select a channel by entering the assigned number to each air broadcasting station in
this mode.
S (Cable channel mode): You can select a channel by entering the assigned number for each cable channel in this
mode.
Full Guide / Mini Guide
The EPG (Electronic Programme Guide) information is provided by the broadcasters. Programme entries may appear blank
or out of date as a result of the information broadcast on a given channel. The display will dynamically update as soon as new
information becomes available.
For the detailed procedures on using Full Guide and Mini Guide, refer to
the descriptions on page 13.
You can also display the guide menu simply by pressing the GUIDE button.
(To congure the Default Guide, refer to the descriptions.)
Full Guide: Displays the programme information as time ordered One hour segments. Two hours of programme information
is displayed which may be scrolled forwards or backwards in time.
Mini Guide: The information of each programme is displayed by each line on the current channel Mini Guide screen from
the current programme onwards according to the programme starting time order.
Default Guide
Mini Guide / Full Guide: You can decide whether to display either the Mini Guide or the Full Guide when the GUIDE
button on the remote control is pressed.
Channel List
For the detailed procedures on using the Channel List, refer to the descriptions on pages 15~16.
Channel Mode
When the press the P>/< button, Channels will be switched within the selected channel list.
Added Ch.: Channels will be switched within the memorized channel list.
Favourite Ch.: Channels will be switched within the favourite channel list.
•
-
-
-

•
•
•
•
N
N
•
•
N
-
-
-
❑
N
O


❑

❑
❑


BN68-01757B-Eng.indb 13 2008-08-29 오후 3:30:03

English - 14
Fine Tune
If the reception is clear, you do not have to ne tune the channel, as this is done automatically during the search and store
operation. If the signal is weak or distorted, you may have to ne tune the channel manually.
Fine tuned channels that have been saved are marked with an asterisk * on the right-hand side of the channel number in
the channel banner.
To reset the ne-tuning, select Reset by pressing the ▲ or ▼ button and then press the ENTER
E
button.
Only Analogue TV channels can be ne tuned.
Signal Information
You can get information about the signal status.
If the signal status is poor, the Weak or No Signal message is displayed.
While viewing a Digital channel, this function can be selected.
The technical information for signal status is displayed.
- Frequency / Service ID / Multiplex / Network / Bit error level / Signal Strength
Using the Full / Mini Guide
▲/▼/◄/►,
(ENTER)
Select a programme by pressing the ▲/▼/◄/► button.
If the next progrmme is selected, it is scheduled with the clock icon displayed. If the ENTER
E
button
is pressed again, press the ▲/▼/◄/► button to select Cancel Schedules, the scheduling is canceled
with the clock icon gone.
For details about scheduling programmes, refer to the section.
RED Toggle between the Mini Guide or Full Guide.
GREEN Full Guide: Scroll backwards quickly (24 hours).
Mini Guide: Display next page quickly.
YELLOW Full Guide: Scroll forwards quickly (24 hours).
Mini Guide: Display previous page quickly.
BLUE Exit the guide.
INFO
INFO button for the detailed information. Channel Number, Running Time, Status Bar, Parental Level,
Video Quality Information (HD/SD), Sound Modes, Subtitle or Teletext, languages of Subtitle or Teletext
and brief summary of the highlighted programme are included on the detailed information. “…” will be
appeared if the summary is long.
❑
N
N
N
❑
N
N
N
Full Guide
DTV Cable 900 f tn 2:10 Tue 1 Jun
Freshmen On Campus
2:00 - 2:30
No Detailed Information
Today 2:00 - 3:00 3:00 - 4:00
Mint Extra
Loaded
Fresh 40 with Dynamite MC
The Distillery
Smash Hits! Sunday
900 f tn
901 ITV Play
902 Kerrang!
903 Kiss
903 oneword
903 Smash Hits!
▼
Street Hypn..
Kisstory
No Information
No Information
No Information
Freshmen O..
Watch
Information
 Mini Guide  +24 Hours  Exit
Mini Guide DTV Cable 900 f tn
Street Hypnosis
Booze Britain
2:00
2:30
5:00
▼
Freshmen On Campus
Watch
Information
 Full Guide  Next Page  Exit
BN68-01757B-Eng.indb 14 2008-08-29 오후 3:30:03

English - 15
Managing Channels
Using this menu, you can Add / Delete or set Favourite channels and use the
programme guide for digital broadcasts.
Select a channel in the All Channels, Added Channels ,Favourites or
Programmed screen by pressing the ▲ / ▼ buttons, and pressing the
ENTER
E
button. Then you can watch the selected channel.
All Channels: Shows all currently available channels.
Added Channels: Shows all added channels.
Favourites: Shows all favourite channels.
Programmed: Shows all current reserved programmes.
Using the Colour buttons with the Channel List
Red (Channel Type): Toggle between your TV, Radio, Data / Other and All.
Green (Zoom): Enlarges or shrinks a channel number.
Yellow (Select): Selects multiple channel lists.
TOOLS (Option): Displays the Delete (or Add), Add to Favourite (or Delete
from Favourite), Lock (or Unlock), Timer Viewing, Edit Channel Name,
Sort, Edit Channel Number, Select All, Deselect All or Auto Store menu.
(The Options menus may differ depending on the situation.)
Channel Status Display Icons
AAn Analogue channel. cA channel selected by pressing the yellow button.
♥
A channel set as a Favourite. (A programme currently being broadcast.
\A locked channel. )A reserved programme
Channel List Option Menu (in All Channels / Added Channels / Favourites)
Press the TOOLS button to use the option menu.
Option menu items may differ depending on the channel status.
Add / Delete
You can delete or add a channel to display the channels you want.
All deleted channels will be shown on All Channels menu.
A gray-coloured channel indicates the channel has been deleted.
The Add menu only appears for deleted channels.
You can also delete a channel in the Added Channels or Favourite menu
in the same manner.
Add to Favourite / Delete from Favourite
You can set channels you watch frequently as favourites.
The ♥ symbol will be displayed and the channel will be set as a favourite.
All favourite channels will be shown on Favourite menu.
Lock / Unlock
You can lock a channel so that the channel cannot be selected and viewed. This function is available only when the Child
Lock is set to on. (see page 24)
The PIN number input screen appears. Enter your 4 digit PIN number.
The default PIN number of a new TV set is 0-0-0-0. You can change the PIN, by selecting Change PIN from the menu.
The \ symbol will be displayed and the channel will be locked.
Timer Viewing
If you reserve a programme you want to watch, the channel is automatically switched to the reserved channel in the Channel
List; even when you are watching another channel. To reserve a programme , set the current time rst. (See page 27.)
Only memorized channels can be reserved.
You can set the channel, month, day, year, hour and minute directly by pressing the number buttons on the remote
control.
Reserving a programme will be shown on Programmed menu.
Digital Programme Guide and Viewing Reservation
When a digital channel is selected, and you press the ► button, the Programme Guide for the channel appears. You can
reserve a programme according to the procedures described above.
N




N
-
-
-
-
N
N
N

N
N
N
N

N
N

N
N
N

N
N
N
N
Channel
Mini Guide
Default Guide : Mini Guide
Channel List
Channel Mode : Added Ch.
Fine Tune
Signal Information
824 UKTV Gold
825 UKTV style
A
1 C --
A
2 C --
A
3 ♥ C --
A
4 C --
A
5 C --
A
6 C --
A
7 C --
A
8 C --
Added Channels
All
 Channel Type  Zoom  Select
Option
824 UKTV Gold
825 UKTV style
A
1 C --
A
2 C --
A
3 C --
A
4 C --
A
5 C --
A
6 C --
A
7 C --
A
8 C --
All Channels
All
 Channel Type  Zoom  Select
Option
Delete
Add to Favourite
Lock
Timer Viewing
Edit Channel Name
Sort
▼
BN68-01757B-Eng.indb 15 2008-08-29 오후 3:30:04

English - 16
Edit Channel Name (only analogue channel)
Channels can labeled so that their call letters appear whenever the channel is selected.
The names of digital broadcasting channels are automatically assigned and cannot be labeled.
Edit Channel Number (only digital channel)
You can also edit the channel number by pressing the number buttons on the remote control.
Sort
This operation allows you to change the programme numbers of the stored channels. This operation may be necessary after
using the auto store.
The function is only available in Analouge.
Select All / Deselect All
Select All: You can select all the channels in the channel list.
Deselect All: You can deselect all the selected channels in the channel list.
You can perform the add / delete, add to Favourites / delete from Favourites, or lock / unlock function for multiple
channels at the same time. Select the required channels and press the yellow button to set all the selected channels at
the same time.
The c mark appears to the left of the selected channels.
You can only select Deselect All when there is a selected channel.
Auto Store
For further details on setting up options, refer to page 11.
If a channel is locked using the Child Lock function, the PIN input window appears.
Channel List Option Menu (in Programmed )
You can view, modify or delete a reservation.
Press the TOOLS button to use the option menu.
Change Info: Select to change a viewing reservation.
Cancel Schedules: Select to cancel a viewing reservation.
Information: Select to view a viewing reservation. (You can also change
the reservation information.)
Select All: Select all reserved programmes.

N


N

•
•
N
N
N

N
N
N




Picture Control
Changing and Resetting the Picture Settings
Mode
You can select the type of picture which best corresponds to your viewing
requirements.
Dynamic: Selects the picture for high-definition in a bright room.
Standard: Selects the picture for the optimum display in a normal
environment.
Movie: Selects the picture for viewing movies in a dark room.
Press the TOOLS button to display Tools menu.
You can also set the picture mode by selecting Tools→PictureMode.
Cell Light / Contrast / Brightness / Sharpness / Colour / Tint(G/R)
Your television has several setting options that allow you to control the picture quality.
Cell Light: Adjusts the pixel brightness. 10 is brightest.
Contrast: Adjusts the contrast level of the picture.
Brightness: Adjusts the brightness level of the picture.
Sharpness: Adjusts the edge definition of the picture.
Colour: Adjusts Colour saturation of the picture.
❑



T
❑





Programmed
1 / 1 / 2008
13:59 5 TV1 Quincy, M.E
18:59 2 TV3 The Equalizer
20:59 2 TV3 McMillan & Wife
21:59 2 TV3 M.Spillane’s mike Hammer
Change Info
Cancel Schedules
Information
Select All
All
 Channel Type  Zoom  Select
Option Information
Mode :Standard ►
Cell Light : 7
Contrast : 95
Brightness : 45
Sharpness : 50
Colour : 50
Tint(G/R) : G50 / R50
Detailed Settings
Picture
BN68-01757B-Eng.indb 16 2008-08-29 오후 3:30:04

English - 17
Tint(G/R): Adjusts the Colour tint of the picture.
Select a picture mode to be adjusted rst. The adjusted values are saved for each picture mode.
When you make changes to Cell Light, Contrast, Brightness, Sharpness, Colour or Tint(G/R), the OSD will be
adjusted accordingly.
In Analogue TV, Ext., AV, S-Video modes of the PAL system, you cannot use the Tint Function.
In PC mode, you can only make changes to Cell Light, Contrast and Brightness.
Settings can be adjusted and stored for each external device you have connected to an input of the TV.
The energy consumed during use can be signicantly reduced if the level of brightness of the picture is reduced, and then
this will reduce the overall running cost.
Detailed Settings
Samsung’s new TVs allow you to make even more precise picture settings than
previous models. See below to adjust detailed picture settings.
Detailed Settings is available in Standard or Movie mode.
In PC mode, you can only make changes to Dynamic Contrast, Gamma
and White Balance from among the Detailed Settings items.
BlackAdjust→Off/Low/Medium/High
You can select the black level on the screen to adjust the screen depth.
DynamicContrast→Off/Low/Medium/High
You can adjust the screen contrast so that the optimal contrast is provided.
Gamma
You can adjust the Primary Colour (Red, Green, Blue) Intensity.
Colour Space
Colour Space is a colour matrix composed of red, green and blue colours. Select your favourite Colour Space to experience
the most natural colour.
Auto:Auto Colour Space automatically adjusts to the most natural colour tone based on programme sources.
Native:Native Colour Space offers deep and rich colour tone.
Custom:Adjusts the colour range to suit your preference.
Customizing the Colour Space
Colour→Red/Green/Blue/Yellow/Cyan/Magenta
Adjusts the Colour range to suit your preference. Colour is available when Colour Space is set to Custom.
Red / Green / Blue: In Colour, you can adjust the RGB values for the selected colour.
Reset: Resets the colour space to the default values.
White Balance
You can adjust the colour temperature for more natural picture colours.
R-Offset / G-Offset / B-Offset / R-Gain / G-Gain / B-Gain: Changing the adjustment value will refresh the adjusted screen.
Reset: The previously adjusted white balance will be reset to the factory defaults.
Flesh Tone
You can emphasize the pink Flesh Tone in the picture.
Changing the adjustment value will refresh the adjusted screen.
EdgeEnhancement→Off/On
You can emphasize object boundaries in the picture.
xvYCC→Off/On
Setting the xvYCC mode to on increases detail and colour space when watching movies from an external device (i.e. DVD
player).
xvYCC is available when the picture mode is set to Movie, and the external input is set to HDMI or Component mode.
If xvYCC function is active, PIP cannot be selected.
Picture Options
In PC mode, you can only make changes to the Colour Tone, Size and
Screen Burn Protection from among the items in Picture Options.
Colour Tone→Cool2 / Cool1 / Normal / Warm1 / Warm2
You can select the most comfortable colour tone to your eyes.
The adjusted values are stored according to the selected Picture mode.
Warm1 or Warm2 is only activated when the picture mode is Movie.

N
N
N
N
N
N
❑
N
N




•
•
•
N
-
-
-
-

•
•

N


N
N
❑
N

N
N
Colour : 50
Tint (G / R) : G50 / R50
DetailedSettings  ►
Picture Options
Picture Reset
Picture
Tint (G / R) : G50 / R50
Detailed Settings
PictureOptions  ►
Picture Reset
Picture
BN68-01757B-Eng.indb 17 2008-08-29 오후 3:30:05

English - 18
Size
You can select the picture size which best corresponds to your viewing requirements.
Press the TOOLS button to display Tools menu.
You can also set the size by selecting Tools→PictureSize.
Auto Wide: Automatically adjusts the picture size to the 16:9 aspect ratio.
16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.
Wide Zoom: Magnify the size of the picture more than 4:3.
Zoom: Magnies the 16:9 wide picture (in the vertical direction) to t the screen size.
4:3: This is the default setting for a video movie or normal broadcasting.
Just Scan: Use the function to see the full image without any cutoff when HDMI (720p / 1080i / 1080p)
or Component (1080i / 1080p) signals are input.
Depending on the input source, the picture size options may vary.
The items available may differ depending on the selected mode.
In PC Mode, only 16:9 and 4:3 mode can be adjusted.
Settings can be adjusted and stored for each external device you have connected to an input of the TV.
Temporary image retention may occur when viewing a static image on the set for more than two hours.
Wide Zoom: Press the ► button to select Position, then press the ENTER
E
button. Press the ▲ or ▼ button to
move the screen up / down. Then press the ENTER
E
button.
Zoom: Press the ► button to select Position, then press the ENTER
E
button. Press the ▲ or ▼ button to move the
picture up and down. Then press the ENTER
E
button. Press the ► button to select Size, then press the ENTER
E
button. Press the ▲ or ▼ button to magnify or reduce the picture size in the vertical direction. Then press the
ENTER
E
button.
After selecting Just Scan in HDMI (1080i / 1080p) or Component (1080i / 1080p) mode: Select Position by pressing
the ◄ or ►button. Use the ▲, ▼, ◄ or ► button to move the picture.
Reset: Press the ◄ or ► button to select Reset, then press the ENTER
E
button. You can initialize the setting.
If you use the Just Scan function with HDMI 720p input, 1 line will be cut at the top, bottom, left and right as in the
overscan function.
When Double ( , ) mode has been set in PIP, the Picture Size cannot be set.
Screen Mode→16:9 / Wide Zoom / Zoom / 4:3
When setting the picture size to Auto Wide in a 16:9 wide TV, you can determine the picture size you want to see the 4:3
WSS (Wide Screen Service) image or nothing. Each individual European country requires different picture size so this function
is intended for users to select it.
16:9: Sets the picture to 16:9 wide mode.
Wide Zoom: Magnify the size of the picture more than 4:3.
Zoom: Magnify the size of the picture vertically on screen.
4:3: Sets the picture to 4:3 normal mode.
This function is available in Auto Wide mode.
This function is not available in PC, Component or HDMI mode.
Digital NR→Off / Low / Medium / High / Auto
If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any
static and ghosting that may appear on the screen.
When the signal is weak, select one of the other options until the best picture is displayed.
DNIe→Off / Demo / On
This TV includes the DNIe function so as to provide a high visual quality. If you set DNIe to on, you can view the screen with
the DNIe feature activated. If you set the DNIe to Demo, you can view the applied DNIe and normal pictures on the screen, for
demonstration purposes. Using this function, you can view the difference in the visual quality.
DNIe™ (Digital Natural Image engine) DNIe™
This feature brings you more detailed image with 3D noise reduction, detail enhancement, contrast enhancement and white
enhancement. New image compensation Algorithm gives brighter, clearer, more detailed image to you. DNIe™ technology will
t every signal into your eyes.
This function is not available in Movie and Standard mode.
HDMI Black Level→Normal / Low
You can directly select the black level on the screen to adjust the screen depth.
This function is active only when the external input connects to HDMI (RGB signals).

T
•
•
•
•
•
•
N
N
N
N
N
N
N
N
N
N
N

•
•
•
•
N
N

N

N
N

N
BN68-01757B-Eng.indb 18 2008-08-29 오후 3:30:05

English - 19
Real100HzDemo→Off/On
You can get a clear distinction between Real 100Hz and 50Hz, especially when watching fast moving scenes. Therefore, when
seeing slow moving scenes, you will not be able to distinguish between Real 100Hz and 50Hz. Demo 100Hz works only with
50Hz signal. Real 100Hz demo mode is provided for shop demonstration with special pictures.
Movie Plus→Off / Low / Medium / High / Demo
You can view more natural skin and clear text even in fast moving scenes.
Use this function when watching movies.
This function is not available in Wide Zoom and Zoom modes.
This function is not available when PIP is set to On.
It is not supported in HDMI 1080p/24Hz, 25Hz, 30Hz mode.
Blue Only Mode→Off / On
This function is for AV device measurement experts. This function displays the blue signal only by removing the red and
green signals from the video signal so as to provide a Blue Filter effect that is used to adjust the Colour and Tint of video
equipment such as DVD players, Home Theaters, etc. Using this function, you can adjust the Colour and Tint to preferred
values appropriate to the signal level of each video device using the Red / Green / Blue / Cyan / Magenta / Yellow Colour Bar
Patterns, without using an additional Blue Filter.
Blue Only Mode is available when the picture mode is set to Movie or Standard.
Screen Burn Protection
To reduce the possibility of screen burn, this unit is equipped with screen burn prevention technology. This technology enables
you to set picture movement up/down (Vertical Line) and side to side (Horizontal Dot). The Time setting allows you to program
the time between movement of the picture in minutes.
Pixel Shift: Using this function, you can minutely move pixels on the PDP in horizontal or vertical direction to minimize after
image on the screen.
Set Pixel Shift to On by pressing the ▲ or ▼ button, then press the ENTER
E
button.
Select the required option by pressing the ▲ or ▼ button, then press the ENTER
E
button.
Available options: Horizontal Dot, Vertical Line, Time.
Optimum condition for pixel shift;
PC TV/Ext/AV/Component/HDMI
Horizontal Dot 4 4
Vertical Line 4 4
Time (minute) 4 2 min
The Pixel Shift value may differ depending on the monitor size (inches) and mode.
This function is not available in the Just Scan mode.
All White: This function helps remove after images on the screen by changing the colour of pixels to white. Use this
function when there are remaining after images or symbols on the screen especially when you displayed a still image on the
screen for a long time.
Scrolling: This function helps remove after images on the screen by moving all the pixels on the PDP according to a
pattern Use this function when there are remaining after images or symbols on the screen especially when you displayed a
still image on the screen for a long time.
Side Gray: When you watch TV with the screen ratio of 4:3, the screen is prevented from any damage by adjusting the
white balance on both extreme left and right sides.
Dark: When you set the screen ratio to 4:3, it darkens the left and right sides.
Light: When you set the screen ratio to 4:3, it brightens the left and right sides.
PictureReset→ResetPictureMode/Cancel
Resets all picture settings to the default values.
Select a picture mode to be reset. The reset is performed for each picture mode.


N
N
N
N

N

•
N
N
N
N
N
N
•
•
•
-
-
❑
N
BN68-01757B-Eng.indb 19 2008-08-29 오후 3:30:05

English - 20
Viewing Picture-in-Picture
You can display a sub picture within the main picture of set programme or video
input. In this way, you can watch the picture of set programme or video input from
any connected equipment while watching the main picture.
You may notice that the picture in the PIP window becomes slightly unnatural
when you use the main screen to view a game or karaoke.
Press the TOOLS button to display Tools menu.
You can also congure PIP related settings by selecting Tools→PIP.
PIP→Off / On
You can activate or deactivate the PIP function.
Main picture Sub picture
Component
HDMI 1, HDMI2/DVI, HDMI 3,
HDMI 4
PC
TV, Ext.1, Ext.2, AV
Source
You can select a source of the sub-picture.
Size → / /
You can select a size of the sub-picture.
If main picture is in HDMI mode, Size is available.
Position → / / /
You can select a position of the sub-picture.
In Double ( , ) mode, Position cannot be selected.
Channel
You can select a channel of the sub-picture only when the Source is set to TV.
Press the TOOLS button to display Tools menu.
You can also set the picture mode by selecting Tools→PIP
N
T
❑


N

N

T
Setting up the TV with your PC
Preset: Press the SOURCE button to select PC mode.
Auto Adjustment
Auto Adjustment allows the PC screen of set to self-adjust to the incoming PC
video signal. The values of ne, coarse and position are adjusted automatically.
This function does not work in DVI-HDMI mode.
Press the TOOLS button to display Tools menu.
You can also set the Auto Adjustment by selecting Tools→Auto
Adjustment.
Screen
Coarse / Fine: The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed
by Fine-tuning alone, then adjust the frequency as best as possible (Coarse) and Fine-tune again. After the noise has been
reduced, readjust the picture so that it is aligned on the center of screen.
PC Position: Adjust the PC’s screen positioning if it does not t the TV screen. Press the ▲ or ▼ button to adjusting the
Vertical-Position. Press the ◄ or ► button to adjust the Horizontal-Position.
Image Reset: You can replace all image settings with the factory default values.
N
❑
N
T
❑



Setup
Entertainment : Off
Energy Saving : Off
PIP  ►
Software Upgrade
Common Interface
PIP
PIP : On
Source : TV
Size :
Position :
Channel : ATV 11
L Move E Enter R Return
Brightness : 45
Sharpness : 50
Auto Adjustment ►
Screen
Detailed Settings
Picture Options
Picture Reset
Picture
BN68-01757B-Eng.indb 20 2008-08-29 오후 3:30:06