Samsung ps50b650 User manual

imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/register
Model Serial No.
BN68-02333H-01
Plasma TV
user manual
Contact SAMSUNG WORLD-WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Country Customer Care Centre Web Site
AUSTRIA 0810 - SAMSUNG(7267864, € 0.07/min) www.samsung.com/at
BELGIUM 02 201 2418 www.samsung.com/be (Dutch)
www.samsung.com/be_fr (French)
CZECH REPUBLIC 800 - SAMSUNG (800-726786) www.samsung.com/cz
DENMARK 8 - SAMSUNG(7267864) www.samsung.com/dk
EIRE 0818 717 100 www.samsung.com/ie
FINLAND 30 - 6227 515 www.samsung.com/fi
FRANCE 01 4863 0000 www.samsung.com/fr
GERMANY 01805 - SAMSUNG(726-7864 € 0,14/Min) www.samsung.de
HUNGARY 06-80-SAMSUNG(726-7864) www.samsung.com/hu
ITALIA 800-SAMSUNG(726-7864) www.samsung.com/it
LUXEMBURG 02 261 03 710 www.samsung.com/lu
NETHERLANDS 0900-SAMSUNG (0900-7267864) (€ 0,10/Min) www.samsung.com/nl
NORWAY 3 - SAMSUNG(7267864) www.samsung.com/no
POLAND "0 801 1SAMSUNG(172678)
022-607-93-33" www.samsung.com/pl
PORTUGAL 80820-SAMSUNG(726-7864) www.samsung.com/pt
SLOVAKIA 0800-SAMSUNG(726-7864) www.samsung.com/sk
SPAIN 902 - 1 - SAMSUNG (902 172 678) www.samsung.com/es
SWEDEN 0771 726 7864 (SAMSUNG) www.samsung.com/se
Switzerland 0848 - SAMSUNG(7267864, CHF 0.08/min) www.samsung.com/ch
www.samsung.com/ch_fr/(French)
U.K 0845 SAMSUNG (7267864) www.samsung.com/uk
BN68-02333EHG-Eng.indb 2 2009-08-26 �� 4:16:21

English - 2
User Instructions
Screen Image retention
Do not display a still image (such as on a video game or when hooking up a PC to this PDP) on the plasma monitor panel for more
than 2 hours as it can cause screen image retention. This image retention is also known as “screen burn”. To avoid such image
retention, reduce the degree of brightness and contrast of the screen when displaying a still image.
Height
The PDP can normally operate only under 2000m in height. It might abnormally function at a place over 2000m in height so do not
install and operate there.
Heat on the top of the PDP TV
The top side of the product may be hot after long period of use as heat dissipates from the panel through the vent hole in the upper
part of the product. This is normal and does not indicate any defect or operation failure of the product. However, children should be
prevented from touching the upper part of the product.
The product is making a ‘cracking’ noise.
A ‘cracking’ noise may occur when the product contracts or expands due to a change of surrounding environment such as
temperature or humidity. This is normal and not a defect of the unit.
Cell Defects
The PDP uses a panel consisting of 2,360,000(HD-level) to 6,221,000(FHD-level) pixels which require sophisticated technology to
produce. However, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of
the product.
Avoid operating the TV at temperatures below 5°C(41°F)
A still image displayed too long may cause permanent damage to the PDP Panel.
Watching the PDP TV in 4:3 format for a long period of time may leave traces of borders displayed on the left,
right and centre of the screen caused by the difference of light emission on the screen. Playing a DVD or a
game console may cause similar effect to the screen. Damages caused by the above effect are not covered
by the Warranty.
Afterimage on the Screen.
Displaying still images from Video games and PC for longer than a certain period of time may produce partial afterimages.
To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.
Warranty
Warranty does not cover any damage caused by image retention.-
Burn-in is not covered by the warranty.-
Installation
Be sure to contact an authorized service centre, when installing your set in a location with heavy dust, high or low temperatures,
high humidity, chemical substance and where it operates continually such as the airport, the train station etc. Failure to do so may
cause a serious damage to your set.
Digital TV Notice
1. Functionalities related to Digital TV(DVB) are only available in countries/areas where DVB-T (MPEG2 and MPEG4 AVC)
digital terrestrial signals are broadcasted or where you have access to a compatible DVB-C(MPEG2 and MPEG4 AAC)
cable-TV service. Please check with your local dealer the possibility to receive DVB-T or DVB-C signal.
2. DVB-T is the DVB European consortium standard for the broadcast transmission of digital terrestrial television and DVB-C
is that for the broadcast transmission of digital TV over cable.
However, some differentiated features like EPG (Electric Program Guide), VOD (Video on Demand) and so on, are not
included in this specication. So, they cannot be supported at this moment.
3. Although this TV set meets the latest DVB-T and DVB-C standards[August,2008], the compatibility with future DVB-T digital
terrestrial and DVB-C digital cable broadcasts cannot be guaranteed.
4. Some cable-TV providers may charge an additional fee for such a service and you may be required to agree to terms and
conditions of their business.
5. Some Digital TV functions might be unavailable in some countries or regions and DVB-C might not work correctly with all
providers.
6. For more information, please contact your local Samsung customer care centre.
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG
customer care centre. (See back cover for more informations.)
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.
N
Product design and specications may be changed without notice in order to enhance product performance.
© 2009 Samsung Electronics Co., Ltd. All rights reserved.
BN68-02333EHG-Eng.indb 2 2009-08-26 �� 4:13:36

English - 3
English
N O T
Symbol Press Note One-Touch Button TOOLS
Contents
Connecting and Preparing Your TV
Checking Parts■.......................................................................... 4
Using the Stand-Base■............................................................... 4
Assembling the Cables■.............................................................. 4
Viewing the Control Panel■......................................................... 5
Viewing the Connection Panel■................................................... 6
Remote Control■......................................................................... 8
Installing Batteries in the Remote Control■................................. 8
Using the Remote Control Backlight Buttons■............................ 9
Switching On and Off■................................................................. 9
Placing Your Television in Standby Mode■.................................. 9
Viewing the Display■................................................................... 9
Viewing the Menus■.................................................................. 10
Using the TOOLS Button ■........................................................ 10
Plug & Play Feature■................................................................ 10
Channel Control
Storing Channels ■................................................................... 11
Managing Channels■................................................................ 13
Picture Control
Changing the Picture Settings■................................................. 15
Setting up the TV with your PC■............................................... 18
PC Display■............................................................................... 19
Sound Control
Changing the Sound Setting■................................................... 20
Selecting the Sound Mode■...................................................... 21
Function Description
Setting the Time■...................................................................... 22
Conguring the Setup Menu■.................................................... 23
Viewing the Picture in Picture (PIP)■......................................... 25
Support / Input
Supported Program■................................................................. 26
Source List / Edit Name■........................................................... 27
Network
Network Connection■................................................................ 28
Network Setup■......................................................................... 30
Media Play
Connecting a USB Device■....................................................... 33
Using the Media Play Function■................................................ 34
Using and Sorting Photo List■................................................... 35
Viewing a Photo or Slide Show ■.............................................. 36
Using and Sorting the Music List■............................................. 38
Playing a Music■...................................................................... 39
Using and Sorting the Movie List■............................................. 40
Playing a Movie File■............................................................... 41
Picture / Music Settings Using Media Play■.............................. 43
Using the Setup Menu■............................................................. 44
Media Play-DLNA
Setting the DLNA Network■....................................................... 45
Installing the DLNA Application■............................................... 45
Using the DLNA Application■.................................................... 47
Using the DLNA Function■........................................................ 50
About Anynet+
Connecting Anynet■+Devices ................................................... 51
Setting Up Anynet■+................................................................. 52
Switching between Anynet■+Devices ....................................... 52
Recording■................................................................................ 53
Listening through a Receiver■................................................... 54
Troubleshooting for Anynet■+................................................... 54
Content Library
Activating the Content Library■................................................. 55
Using the Content Library■........................................................ 56
Home Network Centre
Home Network Centre■............................................................. 57
Setting Up the Home Network Centre■..................................... 58
Using the Message Function■................................................... 59
Using the Media Function■........................................................ 60
Recommendations for Use
Teletext Feature■....................................................................... 61
Wall Mount Kit Specications (VESA)■..................................... 62
Preparing before installing Wall- Mount■................................... 63
How to attach the Stand-Base■................................................. 63
Securing the TV to the Wall■..................................................... 64
Securing the Installation Space■............................................... 64
Troubleshooting■....................................................................... 65
Specications■.......................................................................... 68
Software License■..................................................................... 69
BN68-02333EHG-Eng.indb 3 2009-08-26 �� 4:13:37

English - 4
Assembling the Cables
Enclose the cables in the Holder-Wire Cable so that the cables are not visible through the transparent
stand.
Using the Stand-Base
Two or more people should carry the PDP. Never lay the PDP on the oor N
because of possible damage to the screen. Always keep the PDP upright.
The PDP can rotate 20 degrees in right and left directions.
N
-20° ~ 20°
Checking Parts
Owner’s
Instructions
Remote Control/
AAA Batteries (2ea)
Power Cord Cloth-Clean Holder-Wire Cable Holder-Ring (4ea)
(Refer to page 63)
Program CD
Screw (4ea)
(PS50B650 only)
(Refer to page 63)
Cover-Bottom
(PS50B650 only)
(Refer to page 63)
Cover-Bottom / Screws (2ea)
(PS58B680 / PS63B680 only)
(Refer to page 63)
Ferrite Core for
Headphone
Ferrite Core for
Power Cord
(PS63B680 only)
Ferrite Core for
Power Cord
Warranty Card/
Safety Guide Manual
(Not available in all
locations)
Ferrite CoreN
The ferrite cores are used to shield the cables from interference.
When connecting a cable, open the ferrite core and clip it around the
cable near the plug as shown in the gure.
Connecting and Preparing Your TV
(PS63B680 only)
BN68-02333EHG-Eng.indb 4 2009-08-26 �� 4:13:38

English - 5
Viewing the Control Panel
The product colour and shape may vary depending on the model.N
Front Panel buttons
Touch each button to
operate.
(PS58B680 / PS63B680)
(PS50B650)
1SOURCE
Toggles between all the available input sources
(TV, Ext1, Ext2, AV, Component, PC, HDMI1, HDMI2/DVI,
HDMI3, HDMI4, USB).
In the on-screen menu, use this button as you would use
N
the ENTER
E
button on the remote control.
2
MENU
Press to see an on-screen menu of your TV’s features.
3
+ –
Press to increase or decrease the volume. In the on-screen
menu, use the +–buttons as you would use the
◄ and ► buttons on the remote control.
4
CH
Press to change channels. In the on-screen menu, use the
CH buttons as you would use the ▲ and ▼ buttons on
the remote control. You can use CH button to turn on
the TV without the remote control.
5
POWER INDICATOR
Blinks and turns off when the power is on and lights up in
stand-by mode.
6 (
POWER)
Press to turn the TV on and off.
7
REMOTE CONTROL SENSOR
Aim the remote control towards this spot on the TV.
8
SPEAKERS
BN68-02333EHG-Eng.indb 5 2009-08-26 �� 4:13:39

English - 6
Viewing the Connection Panel
Whenever you connect an audio or video system to your set, ensure that all elements are switched off.N
When connecting an external device, match the colour of the connection terminal to the cable.N
The product colour and shape may vary depending on the model.N
1LAN
Connect a LAN cable to this port to connect to the Network
2POWER IN
Connect the supplied power cord.
3COMPONENT IN
Audio (AUDIO L/R) and video (Y / PB / PR) inputs for
Component.
4PC IN (AUDIO / PC)
Connect to the video and audio output jack on your PC.
5EXT 1, EXT 2
Inputs or outputs for external devices, such as VCR, DVD,
video game device or video disc players.
In EXT mode, DTV Out only supports MPEG SD Video
N
and Audio.
In EXT Mode, Game mode is not available
N
Input/Output Specification
Connector Input Output
Video Audio(L/R) RGB Video + Audio(L/R)
EXT 1 ✔✔✔Only TV or DTV output
is available.
EXT 2 ✔✔Output you can choose.
6HEADPHONE
Connect a set of headphones if you wish to watch a television
program without disturbing other people in the room.
Prolonged use of headphones at a high volume may
N
damage your hearing.
7DIGITAL AUDIO OUT (OPTICAL)
Connect to a Digital Audio Component.
8SERVICE
Connector for service.
9AUDIO OUT(AUDIO R/L)
Connect RCA audio signals from the TV to an external source,
such as Audio equipment.
0ANT IN
75Ω Coaxial connector for Aerial/Cable Network.
!HDMI IN 1, 2(DVI), 3
No additional Audio connection is needed for an HDMI to
HDMI connection.
When using an HDMI/DVI cable connection, you must use-
the HDMI IN 2 (DVI) jack.
What is HDMI?
N
- High Definition Multimedia interface allows the
transmission of high denition digital video data and
multiple channels of digital audio.
- The HDMI/DVI terminal supports DVI connection to
an extended device with the appropriate cable (not
supplied). The difference between HDMI and DVI is
that the HDMI device is smaller in size, has the HDCP
(High Bandwidth Digital Copy Protection) coding feature
installed, and supports multi - channel digital audio.
DVI AUDIO IN
DVI audio outputs for external devices.
Supported modes for HDMI/DVI and Component
480i 480p 576i 576p 720p 1080i 1080p
HDMI/DVI 50Hz X X X O O O O
HDMI/DVI 60Hz X O X X O O O
Component O O O O O O O
TV Rear Panel
Cable Television
Network
or
or
2
543 9 !7
0
8
6
1
BN68-02333EHG-Eng.indb 6 2009-08-26 �� 4:13:40

English - 7
1 COMMON INTERFACE Slot
Insert CI(CI+) (Common Interface) card into the slot.
(refer to page 23)
When not in- serting CI(CI+) CARD in some channels,
Scramble Signal is displayed on the screen.
The- pairing information containing a telephone number,
CI(CI+) CARD ID, Host ID, and other information will be
displayed in about 2~3 minutes. If an error message is
displayed, please contact your service provider.
When the channel- information conguration has nished,
the message Updating Completed is displayed,
indicating that the channel list is now updated.
Insert the CI(CI+)-Card in the direction marked on it.
N
CAM is not supported in some countries andN
regions,check with your authorized dealer.
The CI+ function is only applicable to PS********P model.
N
If you have some problems, please contact to service
provider.
2 USB 1(HDD), USB 2
Connect a USB mass storage device to view photo les
(JPEG) and play audio les (MP3) or movie les. You can
connect to SAMSUNG's network wirelessly.USB 1(HDD)
jack is also used as the HDD jack. HDD (Hard disk drive) is
device which stores digitally encoded data.
3 HDMI IN 4
Connect to the HDMI jack of a device with HDMI output.
4 AV IN (VIDEO, AUDIO L/R)
Video and audio inputs for external devices, such as a
camcorder or VCR.
The product colour and shape may vary depending on the model.N
TV Side Panel
3
4
1
2
BN68-02333EHG-Eng.indb 7 2009-08-26 �� 4:13:41

English - 8
Remote Control
You can use the remote control up to a distance of about 23 feet from the TV.
The performance of the remote control may be affected by bright light.
N
1 POWER button
(turns the TV on and off)
2 Selects the TV mode directly.
3 Number buttons for direct channel
access
4 Press to switch to your favorite
channels.
5 Temporary sound switch-off
6 Volume increase
Volume decrease
7 Available source selection
8 Use to see information on the current
broadcast
9 Use to quickly select frequently used
functions.
0 Use to select on-screen menu items
and change menu values.
! This function enables you to view
Internet@TV.
@ Use these buttons in the Channel list,
Media Play, and Internet@TV, etc.
$ Use to display Channel Lists on the
screen.
% Use these buttons in the Channel list,
Media Play and Anynet+, etc.
^ Press to backlight the buttons on the
remote. This function is convenient
for using at night or when the room is
dark. (Using the remote control with
the ON/OFF( ) light button set to On
will reduce the battery usage time.)
& Previous channel
* Next channel
Previous channel
( Displays the main on-screen menu
) Electronic Program Guide (EPG)
display
a Returns to the previous menu
b Exit the on-screen menu
c This function enables you to view
Media Play
d This function enables you to view
Content Library.
e
Digital subtitle display
f Turn the audio description function on
or off.
Teletext Functions
2
Exit from the teletext display
(depending on the model)
7
Teletext mode selection (LIST/FLOF)
8
Teletext reveal
9
Teletext size
@
Fastext topic selection
#
Teletext display/mix both
teletext information and the normal
broadcast
$ Teletext store
&
Teletext sub page
*
P :Teletext next page
P :Teletext previous page
(
Teletext index
a
Teletext hold
b
Teletext cancel
Installing Batteries in the Remote Control
1. Lift the cover at the back of the remote control upward as shown in the gure.
2. Install two AAA size batteries.
Make sure to match the ‘+’ and ‘–’ ends of the batteries with the diagram inside
N
the compartment.
3. Close the cover.
Remove the batteries and store them in a cool, dry place if you won’t be using the
N
remote control for a long time.
If the remote control doesn’t work, check the followingN
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power outage or is the power cord unplugged?
5. Is there a special uorescent light or neon sign nearby?
BN68-02333EHG-Eng.indb 8 2009-08-26 �� 4:13:42

English - 9
Using the Remote Control Backlight Buttons
Use this feature in dark surroundings and when you are unable to see the remote control buttons clearly.
1. Press the ON/OFF( ) light button
When
NON, the button backlight is turned on for a moment.
Pressing a remote co
Nntrol button when the remote control is on turns the button backlight on for a moment.
Switching On and Off
The mains lead is attached to the rear of your set.
1. Plug the mains lead into an appropriate socket.
The standby indicator lights up on your set.
N
2. Press the POWERPbutton on your set.
You also can press the
NPOWERP button or the TV button on the remote control to turn the TV on.
The programme that you were watching last is reselected automatically.
N
3. Press the numeric button (0~9) or channel up / down (</ >) button on the remote control or <CH>button on your set.
When you switch the set on for the very rst time, you will be asked to choose language in which the menus are to be displayed.
N
4. To switch your set off, press the POWERPbutton again.
Placing Your Television in Standby Mode
Your set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful when you wish to
interrupt viewing temporarily (during a meal, for example).
1. Press the POWERPbutton on the remote control.
The screen is turned off and a red standby indicator appears on your set.
N
2. To switch your set back on, simply press the POWERP, numeric buttons (0~9), TV button or channel up / down (</ >) button
again.
Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example). It is best to unplug
N
the set from the mains and aerial.
Viewing the Display
The display identifies the current channel and the status of certain audio-video settings.
Press the
OINFO button to viewing the information.
Press the INFO button on the remote control. The TV will display the channel, the type of
sound, and the status of certain picture and sound settings.
▲, ▼: You can view other channel’s information. If you want to move to the currently •
selected channel, press ENTEREbutton.
◄, ►: You can view the desired program’s information at the current channel.•
Press the
NINFO button once more or wait approximately 10 seconds and the display
disappears automatically.
BN68-02333EHG-Eng.indb 9 2009-08-26 �� 4:13:42

English - 10
Viewing the Menus
1. With the power on, press the MENU button. The main menu appears on the
screen. The menu’s left side has icons: Picture, Sound, Channel, Setup, Input,
Application, Support.
2. Press the ▲ or ▼ button to select one of the icons. Then press the ENTER
E
button
to access the icon’s sub-menu.
3. Press the EXIT button to exit.
The on-screen menus disappear from the screen after about one minute.
N
Using the TOOLS Button
You can use the TOOLS button to select your frequently used functions quickly and easily. The Tools menu changes depending on
which external input mode you are viewing.
1. Press the TOOLS button. The Tools menu will appear.
2. Press the ▲ or ▼ button to select a menu, then press the ENTER
E
button.
3. Press the ▲ / ▼ / ◄ / ► / ENTEREbuttons to display, change, or use the selected
items. For a more detailed description of each function, refer to the corresponding page.
Anynet•+(HDMI-CEC), see page 52
Picture Size, see page 16•
Picture Mode, see page 15•
Sound Mode, see page 20•
Sleep Timer, see page 22•
SRS TS HD, see page •20
Energy Saving, see page 24•
Dual l ll, see page 21•
Add to Favourite (or Delete from Favourite), see page 14•
PIP, see page 25•
Auto Adjustment, see page 18•
Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and subsequently.
The Screen Saver is activated if there is no remote control key input for longer than 1 minute while Plug & Play is running.
N
The Screen Saver is activated if there is no operating signal for longer than 15 minutes.N
If you accidentally select the wrong country for your TV, the characters on the screen may be wrongly displayed.N
1. Press the POWER button on the remote control. Select the OSD Language. menu
is automatically displayed. Select the appropriate language by pressing the ▲ or ▼
button. Press the ENTER
E
button to conrm your choice.
2. Press the ◄ or ► button to select Store Demo or Home Use, then press the
ENTER
E
button.
We recommend setting the TV to
NHome Use mode for the best picture in your
home environment.
Store Demo
Nmode is only intended for use in retail environments.
If the unit is accidentally set to
NStore Demo mode and you want to return to Home Use (Standard): Press the Volume button on
the TV. When the volume OSD is displayed, press and hold the MENU button on the TV for 5 seconds.
3. Press the ENTER
E
button. Select the appropriate country by pressing the ▲ or ▼ button. Press the ENTER
E
button to conrm
your choice.
4. Press the ▲ or ▼ button to memorize the channels of the selected connection, then press the ENTER
E
button.
Air•: Air antenna signal.
Cable•: Cable antenna signal.
5. Press the ▲ or ▼ button to select the Antenna source to memorize. Press the ENTER
E
button to select Start.
Digital & Analogue•: Digital and Analogue channels.
Digital•: Digital channels.
Analogue•: Analogue channels.
The channel search will start and end automatically.
N
For more detailed description of selecting Cable mode, refer to page 11.N
Plug & Play
Select the OSD Language.
Language :
U Move E Enter
▲
Nederlands
English
Eesti
▼
Tools
Anynet+ (HDMI-CEC)
Picture Size : Auto Wide
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer : Off
SRS TS HD : Off
Energy Saving : Off
Dual l ll : Mono
Add to Favourite
U Move E Enter e Exit
Mode : Standard
Cell Light : 4
Contrast : 95
Brightness : 45
Sharpness : 50
Colour : 50
Tint (G/R) : G50/R50
Advanced Settings
Picture
BN68-02333EHG-Eng.indb 10 2009-08-26 �� 4:13:43

English - 11
6. The message Set the Clock Mode. is displayed. Press the ENTER
E
button. Press the ▲ or ▼ button to select Auto, then Press
the ENTER
E
button.
If you select
NManual, Set current date and time is displayed. (For a more detailed description of Manual, refer to page 22)
If you have received a digital signal, the time will be set automatically.
N
7. The brief instruction on How to get the best performance from your new HDTV is displayed. Press the ENTER
E
button.
This menu is available
NHD Connection Guide in the Support menu.
You can change previous or next page by pressing the
N◄/ ►button.
8. The message Enjoy your TV. is displayed.
If you want to view the TV immediately, select the
NWatch TV.
If you want to view the
NSee Product Guide, press the ENTER
E
button.
If you want to reset this feature...
1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup,
then press the ENTER
E
button.
2. Press the ENTER
E
button again to select Plug & Play.
3. Enter your 4 digit PIN number. The default PIN number of a new TV set is ‘0-0-0-0’.
If you want to change PIN(Personal Identication Number), refer to page 24.
N
TheNPlug & Play feature is only available in the TV mode.
Storing Channels
Country
❑
Digital Channel: You can change the country for digital channels.
Analogue Channel
: You can change the country for analogue channels.
The PIN number input screen appears. Enter your 4 digit PIN number. N
Auto Store
❑
Scans for all channels with active broadcast stations (and availability depends on your
country) and stores them in the TV's memory.
You set the TV to memorize the channels of the selected connection.
Air•: Air antenna signal.
Cable•: Cable antenna signal.
You can select the antenna source to memorize.
Digital & Analogue•: Digital and Analogue channels.
Digital•: Digital channels.
Analogue•: Analogue channels.
When selecting
NCable,
Search Mode•: Displays the search mode. (Quick)
- Network ID: Displays the network identication code.
- Frequency: Displays the frequency for the channel.
- Modulation: Displays available modulation values.
- Symbol Rate: Displays available symbol rates.
Search Mode•: Displays the search mode.(Full, Network)
- Start Frequency: Displays the frequency start values.
- End Frequency: Displays the frequency stop values.
- Modulation: Displays available modulation values.
- Symbol Rate : Displays available symbol rates.
If you want to stop
NAuto Store, press the ENTERE button.
The Stop Auto Store? message will be displayed.
Select Yes by pressing the ◄ or ► button, then press the ENTERE button.
Channel Control
Channel
Country ►
Auto Store
Manual Store
Cable Search Option
Full Guide
Mini Guide
Default Guide : Full Guide
Channel List
Setup
Plug & Play ►
Menu Language : English
Time
Broadcast
Security
Network
General
BN68-02333EHG-Eng.indb 11 2009-08-26 �� 4:13:43

English - 12
Manual Store
❑
Scans for a channel manually and stores it in the TV’s memory.
Digital Channel(Digital)
Digital Channel is only available in DTV mode.N
Channel• : Set the Channel number using the ▲, ▼ or number (0~9) buttons.
Frequency• : Set the frequency using the number (0~9) buttons.
Bandwidth• : Set the bandwidth using the ▲ or ▼ buttons.
When it has nished, channels are updated in the channel list.
N
Analogue Channel
Manual store for analogue channel.
Programme• (Programme number to be assigned to a channel): Sets the programme number using the ▲, ▼ or number (0~9)
buttons.
Colour System → Auto / PAL / SECAM / NTSC 4.43• : Sets the colour system value using the ▲ or ▼ button.
Sound System• → BG / DK / I / L : Sets the sound system value using the ▲ or ▼ button.
Channel• (When you know the number of the channel to be stored): Press the ▲ or ▼ button to select C(Air channel) or S
(Cable channel). Press the ► button, then press the ▲, ▼ or number (0~9) buttons to select the required number.
If there is abnormal sound or no sound, reselect the sound standard required.
N
Search• (When you do not know the channel numbers): Press the ▲ or ▼ button to start the search. The tuner scans the
frequency range until the rst channel or the channel that you selected is received on the screen.
Store• (When you store the channel and associated programme number): Set to OK by pressing the ENTERE
button.
Channel mode
N
- C (Air channel mode): You can select a channel by entering the assigned number to each air broadcasting station in this mode .
- S (Cable channel mode): You can select a channel by entering the assigned number for each cable channel in this mode.
Cable Search Option
❑
You can set additional search options such as frequency and symbol rate for cable network searching. (Depending on the each
country)
Freq.Start•: Displays the frequency start values.
Freq.Stop•: Displays the frequency stop values.
Modulation•: Displays available modulation values.
Symbol Rate•: Displays available symbol rates.
If the
NFreq.Start value is bigger than Freq.Stop value, the warning message is displayed.
Full Guide / Mini Guide
❑
The EPG (Electronic Programme Guide) information is provided by the broadcasters. Programme entries may appear blank or out
of date as a result of the information broadcast on a given channel. The display will dynamically update as soon as new information
becomes available.
Full Guide•: Displays the programme information as time ordered one hour segments. One hours of programme information is
displayed which may be scrolled forwards or backwards in time.
Mini Guide•: The information of each programme is displayed by each line on the current channel Mini Guide screen from the
current programme onwards according to the programme starting time order.
Default Guide
❑
Mini Guide / Full Guide
You can decide whether to display either the Mini Guide or the Full Guide when the
GUIDE button on the remote control is pressed.
You can also display the guide menu simply by pressing the
OGUIDE button.
Continued...
Channel
Full Guide
Mini Guide
Default Guide : Full Guide ►
Channel List
Channel Mode : Added Ch.
Fine Tune
BN68-02333EHG-Eng.indb 12 2009-08-26 �� 4:13:43

English - 13
Using the Full / Mini Guide
▲ / ▼ / ◄ / ► ,
ENTER Select a programme by pressing the ▲/▼/◄/►/ENTEREbutton.
RED Toggle between the Mini Guide or Full Guide.
GREEN Full Guide: Scroll backwards quickly (-24 hours).
YELLOW Full Guide: Scroll forwards quickly (+24 hours).
BLUE Exit the guide.
INFO INFO button for the detailed information.
Channel Mode
❑
When the press the P (</>) button, Channels will be switched within the selected channel list.
Added Ch.: Channels will be switched within the memorized channel list.
Favourite Ch.: Channels will be switched within the favourite channel list.
Fine Tune
❑(Analogue channel only)
If the reception is clear, you do not have to ne tune the channel, as this is done automatically during the search and store
operation. If the signal is weak or distorted, you may have to ne tune the channel manually.
Fine tuned channels that have been saved are marked with an asterisk
N*on the right-hand side of the channel number in the
channel banner.
If you do not store the ne-tuned channel in memory, adjustments are not saved.
N
To reset the ne-tuning, select NReset by pressing the ▼ button and then press the ENTERE button.
Managing Channels
Using this menu, you can Add / Delete or set Favourite channels and use the programme
guide for digital broadcasts.
Select a channel in the
NAll Channels, Added Channels, Favourites, or Programmed
screen by pressing the ▲ or ▼ buttons, and pressing the ENTEREbutton.
Then you can watch the selected channel.
All Channels•: Shows all currently available channels.
Added Channels•: Shows all added channels.
Favourites•: Shows all favourite channels.
Programmed•: Shows all current reserved programmes.
Press the
OCH LIST button on the remote control to bring up the channel lists.
Using the Colour buttons with the Channel List
N
Red- (Channel Type): Toggle between your TV, Radio, Data/Other and All.
Green- (Zoom): Enlarges or shrinks a channel number.
Yellow- (Select): Selects multiple channel lists.
T- TOOLS (Tools): Displays the Delete (or Add), Add to Favourite (or Delete from
Favourite), Lock (or Unlock), Timer Viewing, Edit Channel Name, Edit Channel
Number, Sort, Select All (or Deselect All), or Auto Store menu.
(The Tools menus may differ depending on the situation.)
Channel Status Display Icons
N
AAn Analogue channel. cA channel selected by pressing the
yellow button.
♥
A channel set as a Favourite. (A programme currently being
broadcast.
\A locked channel. )A reserved programme
Channel
Mini Guide
Default Guide : Full Guide
Channel List
Channel Mode : Added Ch.
Fine Tune
824 UKTV Gold
825 UKTV style
A
1 C --
A
2 C --
A
3 ♥ C --
A
4 C --
A
5 C --
A
6 C --
A
7 C --
A
8 C --
All Channels
All
 Channel Type  Zoom  Select
Page
Tools
Full Guide
DTV Cable 900 f tn 2:10 Tue 1 Jun
Freshmen On Campus
2:00 - 2:30
No Detailed Information
Today 2:00 - 3:00 3:00 - 4:00
Mint Extra
Loaded
Fresh 40 with Dynamite MC
The Distillery
Smash Hits! Sunday
900 f tn
901 ITV Play
902 Kerrang!
903 Kiss
903 oneword
903 Smash Hits!
▼
Street Hypn..
Kisstory
No Information
No Information
No Information
Freshmen O..
Mini Guide DTV Cable 900 f tn
Street Hypnosis
Booze Britain
2:00
2:30
5:00
▼
Freshmen On Campus
Watch Information
Page
 Full Guide  Exit
Watch Information
Page
 Mini Guide  +24 Hours  Exit
BN68-02333EHG-Eng.indb 13 2009-08-26 �� 4:13:45

English - 14
Channel
❑List Tools Menu (in All Channels / Added Channels / Favourites)
Press theNTOOLS button to use the Tools menu.
The
NTools menu items may differ depending on the channel status.
Add / Delete
You can delete or add a channel to display the channels you want.
All deleted channels will be shown on
NAll Channels menu.
A gray-coloured channel indicates the channel has been deleted.
N
TheNAdd menu only appears for deleted channels.
You can also delete a channel to the
NAdded Channels or Favourites menu in the
same manner.
Add to Favourite / Delete from Favourite
You can set channels you watch frequently as favourites.
Press the
TTOOLS button to display Tools menu.
You can also add the favourite channel by selecting Tools → Add to Favourite
(or Delete from Favourite).
To select the Favourite channels you have set up, press the
OFAV.CH button on the
remote control.
The “♥” symbol will be displayed and the channel will be set as a favourite.
N
All favourite channels will be shown on Favourite menu.N
Lock / Unlock
You can lock a channel so that the channel cannot be selected and viewed. This function is available only when the Child Lock is
set to On. (see page 24)
The PIN number input screen appears. Enter your 4 digit PIN number.
N
The default PIN number of a new TV set is ‘0-0-0-0’. You can change the PIN, by selecting Change PIN from the menu.N
The “N\” symbol will be displayed and the channel will be locked.
Timer Viewing
If you reserve a programme you want to watch, the channel is automatically switched to the reserved channel in the Channel List;
even when you are watching another channel. To reserve a programme set the current time rst. (See page 22)
Only memorized channels can be reserved.
N
You can set the channel, month, day, year, hour and minute directly by pressing the number buttons on the remote control.N
Reserving a programme will be shown onNProgrammed menu.
Digital Programme Guide and Viewing Reservation
N
When a digital channel is selected, and you press the ► button, the Programme Guide for the channel appears.
You can reserve a programme according to the procedures described above.
Edit Channel Name(Analogue channel only)
Channels can be labeled so that their call letters appear whenever the channel is selected.
The names of digital broadcasting channels are automatically assigned and cannot be labeled.N
Edit Channel Number(Digital channel only)
You can also edit the channel number by pressing the number buttons on the remote control.
Sort(Analogue channel only)
This operation allows you to change the programme numbers of the stored channels. This operation may be necessary after using
the auto store.
Select All / Deselect All
You can deselect or select all channels in the channel list.
You can perform the Add / Delete, Add to Favourites / Delete from Favourites, or Lock / Unlock function for multiple channels at
Nthe same time. Select the required channels and press the yellow button to set all the selected channels at the same time.
The
Ncmark appears to the left of the selected channels.
You can only select
NDeselect All when there is a selected channel.
Auto Store
For further details on setting up options, refer to page 11.N
If a channel is locked using theNChild Lock function, the PIN input window appears.
Channel List Tools Menu (
❑in Programmed )
You can view, modify or delete a reservation.
Press the
NTOOLS button to use the Tools menu.
Change Info• : Select to change a viewing reservation.
Cancel Schedules• : Select to cancel a viewing reservation.
Information• : Select to view a viewing reservation. (You can also change the reservation
information.)
Select All / Deselect All• : Select or deselect all reserved programmes.
824 UKTV Gold
825 UKTV style
A
1 C --
A
2 C --
A
3 C --
A
4 C --
A
5 C --
A
6 C --
A
7 C --
A
8 C --
All Channels
Delete
Add to Favourite
Lock
Timer Viewing
Edit Channel Name
Sort
▼
Programmed
1 / 1 / 2009
13:59 5 TV1 Quincy, M.E
18:59 2 TV3 The Equalizer
20:59 2 TV3 McMillan & Wife
21:59 2 TV3 M.Spillane’s mike Hammer
Change Info
Cancel Schedules
Information
Select All
All
 Zoom  Select
Tools Information
All
 Channel Type  Zoom  Select
Page
Tools
BN68-02333EHG-Eng.indb 14 2009-08-26 �� 4:13:45

English - 15
Changing the Picture Settings
Mode
❑
You can select the type of picture which best corresponds to your viewing requirements.
Dynamic / Standard / Eco / Movie
Press the
TTOOLS button to display Tools menu.
You can also set the picture mode by selecting Tools → Picture Mode.
Cell Light / Contrast / Brightness / Sharpness / Colour / Tint (G/R)
❑
Your television has several setting options that allow you to control the picture quality.
Cell Light•: Adjusts the pixel brightness.
Contrast•: Adjusts the contrast level.
Brightness•: Adjusts the brightness level.
Sharpness•: Adjusts the sharpness.
Colour•: Adjusts the colour saturation of the picture using the bar on the screen.
Tint (G/R)•: Adjusts the colour tint of the picture.
When you make changes to
NCell Light, Contrast, Brightness, Sharpness, Colour or Tint (G/R), the OSD will be adjusted
accordingly.
The adjusted values are saved for each picture mode.
N
In AnalogueNTV, Ext., AV modes of the PAL system, you cannot use the Tint Function.
In
NPC mode, you can only make changes to Cell Light, Contrast and Brightness.
Each adjusted setting will be stored separately according to its input mode.
N
The energy consumed during use can be signicantly reduced if the level of brightness of the picture is reduced, and then this N
will reduce the overall running cost.
Advanced Settings
❑
You can adjust the advanced settings for your screen including the colour and contrast.
Advanced Settings
Nis available in Standard or Movie mode.
In
NPC mode, you can only make changes to Dynamic Contrast, Gamma and
White Balance from among the Advanced Settings items.
Black Tone → Off / Dark / Darker / Darkest
You can enhance the picture depth by adjusting the black colour density.
Dynamic Contrast → Off / Low / Medium / High
You can adjust the screen contrast so that the optimal contrast is provided.
Gamma
You can adjust the primary colour (Red, Green, Blue) Intensity.
Colour Space
Colour Space is a colour matrix composed of red, green and blue colours. Select your favourite Colour Space to experience the
most natural colour.
Auto•: Automatically sets the colour range depending on the input video source.
Native•:Sets the colour range wider than the that of the input video source.
Custom•: Adjusts the colour range to suit your preference.
Customizing the Colour Space
N
- Adjusts the Colour range to suit your preference. Colour is available when Colour Space is set to Custom.
- Colour → Red / Green / Blue / Yellow / Cyan / Magenta
- Red / Green / Blue: You can adjust the RGB values for the selected colour.
- Reset: Resets the colour space to the default values.
Picture Control
Continued...
Mode : Standard ►
Cell Light : 4
Contrast : 95
Brightness : 45
Sharpness : 50
Colour : 50
Tint (G/R) : G50/R50
Advanced Settings
Picture
Colour : 50
Tint (G/R) : G50/R50
Advanced Settings ►
Picture Options
Picture Reset
Picture
BN68-02333EHG-Eng.indb 15 2009-08-26 �� 4:13:46

English - 16
White Balance
You can adjust the colour temperature for more natural picture colours.
R-Offset / G-Offset / B-Offset / R-Gain / G-Gain / B-Gain•: Changing the adjustment value will refresh the adjusted screen.
Reset•: Resets the default white balance.
Flesh Tone
You can adjust the esh tone to be more or less red.
Changing the adjustment value will refresh the adjusted screen.
N
Edge Enhancement → Off / On
You can emphasize object boundaries in the picture.
xvYCC → Off / On
Setting the xvYCC mode to on increases detail and colour space when watching movies from an external device (i.e. DVD player).
xvYCC
Nis available when the picture mode is set to Movie, and the external input is set to HDMI or Component mode.
This function may not be supported depending on your external device.
N
Picture Options
❑
You can customize the additional picture settings to suit your preference.
In
NPC mode, you can only make changes to the Colour Tone, Size and Screen
Burn Protection from among the items in Picture Options.
Colour Tone → Cool / Normal / Warm1 / Warm2 / Warm3
You can select the most comfortable colour tone to your eyes.
The adjusted values are stored according to the selected
NPicture mode.
Warm1, Warm2,
Nor Warm3 is only activated when the picture mode is Movie.
Size → Auto Wide / 16:9 / Wide Zoom / Zoom / 4:3 / Screen Fit
You can select the picture size which best corresponds to your viewing requirements.
Auto Wide• : Sets the picture in Auto Wide format.
16:9• : Sets the picture to the 16:9 aspect ratio.
Wide Zoom• : Select this menu to view 4:3 aspect ratio pictures over a 16:9 aspect ratio TV by stretching the 4:3 picture
vertically.
Zoom• : Stretches the 16:9 aspect ratio picture vertically.
4:3• : Sets the picture to the 4:3 aspect ratio.
Screen Fit•: Displays the full native HD signal that cannot be viewed using a normal TV.
Depending on the input source, the picture size options may vary.
N
The items available may differ depending on the selected mode.
N
In
NPC Mode, only 16:9 and 4:3 mode can be adjusted.
When Double
N( , ) mode has been set in PIP, the Picture Size cannot be set.
Settings can be adjusted and stored for each external device you have connected to an input of the TV.
N
Temporary image retention may occur when viewing a static image on the set for more than two hours.
N
Wide Zoom
N: Press the ► button to select Position, then press the ENTEREbutton.
Press the ▲ or ▼ button to move the screen up / down. Then press the ENTEREbutton.
Zoom
N: Press the ► button to select Position, then press the ENTERE button. Press the ▲ or ▼ button to move the
picture up and down. Then press the ENTERE button. Press the ► button to select Size, then press the ENTEREbutton.
Press the ▲ or ▼ button to magnify or reduce the picture size in the vertical direction. Then press the ENTEREbutton.
After selecting
NScreen Fit in HDMI (1080i / 1080p) or Component (1080i / 1080p) mode: Select Position by pressing
the ◄ or ►button. Use the ▲, ▼, ◄ or ► button to move the picture.
Reset
N: Press the ◄ or ► button to select Reset, then press the ENTEREbutton. You can initialize the setting.
If you use the
NScreen Fit function with HDMI 720p input, 1 line will be cut at the top, bottom, left and right as in the overscan
function.
Screen Mode → 16:9 / Wide Zoom / Zoom / 4:3
When setting the picture size to Auto Wide in a 16:9 wide TV, you can determine the picture size you want to see the 4:3 WSS
(Wide Screen Service) image or nothing. Each individual European country requires different picture size so this function is
intended for users to select it.
This function is available in
NAuto Wide mode.
This function is not available in
NPC, Component or HDMI mode.
Continued...
Tint (G/R) : G50/R50
Advanced Settings
Picture Options ►
Picture Reset
Picture
BN68-02333EHG-Eng.indb 16 2009-08-26 �� 4:13:46

English - 17
Digital NR → Off / Low / Medium / High / Auto
If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static
and ghosting that may appear on the screen.
When the signal is weak, select one of the other options until the best picture is displayed.
N
HDMI Black Level → Normal / Low
You can directly select the black level on the screen to adjust the screen depth.
This function is active only when the external input connects to HDMI (RGB signals).
N
1080 Full HD Motion Demo → Off / On

Samsung's new generation PDP panels deliver stunning Full HD motion clarity when viewing fast action sports, movies, and games.
This function is not available in PC, Game or Media Play mode.
N
Film Mode
You can optimize the picture mode for watching movies.
Off•: Turn the Film Mode function off.
Auto1• : Automatically adjusts the picture for the best quality when watching a lm.
Auto2• : Automatically optimizes the video text when watching a lm.
Cinema Smooth•: Offers the ultimate cinema experience.
Film mode is supported in TV, Video, Component(480i / 1080i) and HDMI(1080i).
N
Real 100Hz Demo → Off / On
You can get a clear distinction between Real 100Hz and 50Hz, especially when watching fast moving scenes. Therefore, when
seeing slow moving scenes, you will not be able to distinguish between Real 100Hz and 50Hz. Demo 100Hz works only with 50Hz
signal. Real 100Hz demo mode is provided for shop demonstration with special pictures.
Blue Only Mode → Off / On

This function is for AV device measurement experts. This function displays the blue signal only by removing the red and green
signals from the video signal so as to provide a Blue Filter effect that is used to adjust the Colour and Tint of video equipment such
as DVD players, Home Theaters, etc.
Blue Only Mode
Nis available when the picture mode is set to Movie or Standard.
Screen Burn Protection
To reduce the possibility of screen burn, this unit is equipped with screen burn prevention technology. This technology enables you
to set picture movement up/down (Vertical) and side to side (Horizontal). The Time setting allows you to program the time between
movement of the picture in minutes.
Pixel Shift• : Using this function, you can minutely move pixels on the PDP in horizontal or vertical direction to minimize after
image on the screen.
Optimum condition for pixel shift
N
Item TV/Ext./AV/Component/HDMI/PC
Horizontal 0~2 2
Vertical 0~4 4
Time (minute) 1~4 min 2 min
The Pixel Shift value may differ depending on the monitor size (inches) and mode.
N
This function is not available in the
NScreen Fit mode.
Scrolling•: This function helps remove after images on the screen by moving all the pixels on the PDP according to a pattern.
Use this function when there are remaining after images or symbols on the screen especially when you displayed a still image
on the screen for a long time.
Side Grey•: When you watch TV with the screen ratio of 4:3, the screen is prevented from any damage by adjusting the white
balance on both extreme left and right sides.
- Light: When you set the screen ratio to 4:3, it brightens the left and right sides.
- Dark: When you set the screen ratio to 4:3, it darkens the left and right sides.
Continued...
BN68-02333EHG-Eng.indb 17 2009-08-26 �� 4:13:46

English - 18
Setting up the TV with your PC
Preset: Press theNSOURCE button to select PC mode.
Auto Adjustment
❑
Auto Adjustment allows the PC screen of set to self-adjust to the incoming PC video
signal. The values of ne, coarse and position are adjusted automatically.
This function does not work in DVI-HDMI mode.
N
Press the
TTOOLS button to display Tools menu.
You can also set the auto adjustment by selecting Tools → Auto Adjustment.
Screen
❑
The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by Fine-tuning alone,
then adjust the frequency as best as possible (Coarse) and Fine-tune again. After the noise has been reduced, readjust the picture
so that it is aligned on the center of screen.
Coarse
Adjusts the frequency when vertical noise appears on the screen.
Fine
Adjusts the screen to be clearer.
PC Position
Adjust the PC’s screen positioning if it does not t the TV screen. Press the ▲ or ▼ button to adjusting the Vertical-Position.
Press the ◄ or ► button to adjust the Horizontal-Position.
Image Reset
You can replace all image settings with the factory default values.
Picture Reset →
❑Reset Picture Mode / Cancel
Resets all picture settings to the default values.
Select a picture mode to be reset. The reset is performed for each picture mode.
N
Brightness : 45
Sharpness : 50
Auto Adjustment ►
Screen
Advanced Settings
Picture Options
Picture Reset
PicturePicture
Advanced Settings
Picture Options
Picture Reset ►
Picture
BN68-02333EHG-Eng.indb 18 2009-08-26 �� 4:13:46

English - 19
PC Display
Setting Up Your PC Software (Based on Windows XP)
❑
The Windows display-settings for a typical computer are shown below. The actual
screens on your PC will probably be different, depending upon your particular version
of Windows and your particular video card. However, even if your actual screens
look different, the same basic set-up information will apply in almost all cases. (If not,
contact your computer manufacturer or Samsung Dealer.)
1. First, click on ‘Control Panel’ on the Windows start menu.
2. When the control panel window appears, click on ‘Appearance and Themes’ and a
display dialog-box will appear.
3. When the control panel window appears, click on ‘Display’ and a display dialog-box
will appear.
4. Navigate to the ‘Settings’ tab on the display dialog-box.
The correct size setting (resolution)
Optimum: 1920 X 1080 pixels
If a vertical-frequency option exists on your display settings dialog box, the correct
value is ‘60’ or ‘60 Hz’. Otherwise, just click ‘OK’ and exit the dialog box.
Display Modes
❑
Both screen position and size will vary depending on the type of PC monitor and its resolution.
The resolutions in the table are recommended.
When using an HDMI/DVI cable connection, you must use the HDMI IN 2(DVI) jack.
N
The interlace mode is not supported.
N
The set might operate abnormally if a non-standard video format is selected.
N
Separate and Composite modes are supported. SOG is not supported.
N
Too long or low quality VGA cable can cause picture noise at high resolution modes (1920x1080).
N
D-Sub and HDMI/DVI Input
Mode Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock Frequency (MHz) Sync Polarity (H/V)
IBM
640 x 350 31.469 70.086 25.175 + / -
720 x 400 31.469 70.087 28.322 - / +
MAC
640 x 480 35.000 66.667 30.240 - / -
832 x 624 49.726 74.551 57.284 - / -
1152 x 870 68.681 75.062 100.000 - / +
VESA CVT
720 x 576 35.910 59.950 32.750 - / +
1152 x 864 53.783 59.959 81.750 - / +
1280 x 720 44.772 59.855 74.500 - / +
56.456 74.777 95.750 - / +
1280 x 960 75.231 74.857 130.000 - / +
VESA DMT
640 x 480
31.469 59.940 25.175 - / -
37.861 72.809 31.500 - / -
37.500 75.000 31.500 - / -
800 x 600 37.879 60.317 40.000 + / +
800 x 600 48.077 72.188 50.000 + / +
800 x 600 46.875 75.000 49.500 + / +
1024 x 768
48.363 60.004 65.000 - / -
56.476 70.069 75.000 - / -
60.023 75.029 78.750 + / +
1152 x 864 67.500 75.000 108.000 + / +
1280 x 800 49.702 59.810 83.500 - / +
62.795 74.934 106.500 - / +
1280 x 960 60.000 60.000 108.000 + / +
1280 x 1024 63.981 60.020 108.000 + / +
79.976 75.025 135.000 + / +
1360 x 768 47.712 60.015 85.500 + / +
1440 x 900 55.935 59.887 106.500 - / +
70.635 74.984 136.750 - / +
1680 x 1050 65.290 59.954 146.250 - / +
VESA DMT /
DTV CEA 1920 x 1080p 67.500 60.000 148.500 + / +
VESA GTF 1280 x 720 52.500 70.000 89.040 - / +
1280 x 1024 74.620 70.000 128.943 - / -
BN68-02333EHG-Eng.indb 19 2009-08-26 �� 4:13:47

English - 20
Changing the Sound Setting
Mode
❑
You can select the type of special sound effect to be used when watching a given
broadcast.
Standard / Music / Movie / Clear Voice / Custom

Press theTTOOLS button to display Tools menu.
You can also congure the sound mode by selecting Tools → Sound Mode.
Equalizer
❑
The sound settings can be adjusted to suit your personal preferences.
Mode•: You can select a sound mode to suit your personal preferences.
Balance•: Controls the balance between the right and left speakers.
100Hz / 300Hz / 1KHz / 3KHz / 10KHz•(Bandwidth Adjustment): Adjusts the level of different bandwidth frequencies
Reset•: Resets the equalizer settings to the default values.
SRS TruSurround HD → Off / On
❑
SRS TruSurround HD is the combined technology of TruSurround and FOCUS, TruBass.
SRS TruSurround HD enables you to enjoy a virtual 5.1 Surround Sound effect over the TV's two speakers. This function provides
not only rich deep bass also improves high frequency resolution.
Press the
TTOOLS button to display Tools menu.
You can also set the SRS TruSurround HD by selecting Tools → SRS TS HD.
TruSurround HD, SRS and the symbol are trademarks of SRS Labs, Inc.
TruSurround HD technology is incorporated under license from SRS Labs, Inc.
If the sound is abnormal while TV is playing music, please adjust the equalizer and
NSRS TruSurround HD (Off/On).
Audio Language
❑(Digital channel only)
You can change the default value for audio languages. Displays the language information for the incoming stream.
You can only select the language among the actual languages being broadcast.
N
Audio Format → MPEG / Dolby Digital
❑(Digital channel only)
When sound is emitted from both the main speaker and the audio receiver, a sound echo may occur due to the decoding speed
difference between the main speaker and the audio receiver. In this case, use the TV Speaker function.
You can only select the language among the actual languages being broadcast.
N
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby Laboratories.
Audio Description
❑(Digital channel only)
This is an auxiliary audio function that provides an additional audio track for visually challenged persons. This function handles the
Audio Stream for the AD (Audio Description), when it is sent along with the Main audio from the broadcaster. Users can turn the
Audio Description On or Off and control the volume.
You can select these options simply by pressing the
OAD button on the remote
control.
Audio Description → Off / On
Turn the audio description function on or off.
Volume
Adjusts the audio description volume.
Volume
Nis active when Audio Description is set to On.
Sound Control
Mode : Custom ►
Equalizer
SRS TruSurround HD : Off
Audio Language : ----
Audio Format : ----
Audio Description
Auto Volume : Off
Speaker Select : TV Speaker
Sound
BN68-02333EHG-Eng.indb 20 2009-08-26 �� 4:13:48