Samsung PS50B679 User manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/register
Model Serial No.
BN68-02217A-00
Plasma TV
user manual
Contact SAMSUNG WORLD-WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Country Customer Care Centre Web Site
AUSTRIA 0810 - SAMSUNG(7267864, € 0.07/min) www.samsung.com/at
BELGIUM 02 201 2418 www.samsung.com/be
CZECH REPUBLIC 800 - SAMSUNG (800-726786) www.samsung.com/cz
DENMARK 8 - SAMSUNG(7267864)
EIRE 0818 717 100 www.samsung.com/ie
800-7267 www.samsung.ee
www.samsung.com/fi
www.samsung.com/fr
GERMANY www.samsung.de
HUNGARY 06 - 80 - SAMSUNG(7267864) www.samsung.com/hu
ITALIA 800 - SAMSUNG(7267864) www.samsung.com/it
KAZAKHSTAN
KYRGYZSTAN
LATVIA 8000-7267 www.samsung.com/lv
LITHUANIA 8-800-77777 www.samsung.lt
LUXEMBURG www.samsung.com/lu
NETHERLANDS www.samsung.com/nl
www.samsung.com/no
0 - 801 - 1SAMSUNG(172678)
www.samsung.com/pl
808 20 - SAMSUNG(7267864) www.samsung.com/pt
RUSSIA www.samsung.ru
0800 - SAMSUNG(7267864)
SPAIN www.samsung.com/es
www.samsung.com/se
www.samsung.com/ch
TADJIKISTAN
TURKEY 444 77 11 www.samsung.com/tr
U.K
UKRAINE www.samsung.ua
UZBEKISTAN
2009-05-20 4:54:28
English - 2
User Instructions
Screen Image retention
retention, reduce the degree of brightness and contrast of the screen when displaying a still image.
Height
The PDP can normally operate only under 2000m in height. It might abnormally function at a place over 2000m in height so do not
install and operate there.
Heat on the top of the PDP TV
The top side of the product may be hot after long period of use as heat dissipates from the panel through the vent hole in the upper
part of the product. This is normal and does not indicate any defect or operation failure of the product. However, children should be
prevented from touching the upper part of the product.
The product is making a ‘cracking’ noise.
temperature or humidity. This is normal and not a defect of the unit.
Cell Defects
the product.
Avoid operating the TV at temperatures below 5°C(41°F)
A still image displayed too long may cause permanent damage to the PDP Panel.
right and centre of the screen caused by the difference of light emission on the screen. Playing a DVD or a
game console may cause similar effect to the screen. Damages caused by the above effect are not covered
Afterimage on the Screen.
Displaying still images from Video games and PC for longer than a certain period of time may produce partial afterimages.
Warranty
-
Burn-in is not covered by the warranty.-
Installation
Be sure to contact an authorized service centre, when installing your set in a location with heavy dust, high or low temperatures,
cause a serious damage to your set.
Digital TV Notice
1.
digital terrestrial signals are broadcasted or where you have access to a compatible DVB-C(MPEG2 and MPEG4 AAC)
2. DVB-T is the DVB European consortium standard for the broadcast transmission of digital terrestrial television and DVB-C
is that for the broadcast transmission of digital TV over cable.
3. Although this TV set meets the latest DVB-T and DVB-C standards[August,2008], the compatibility with future DVB-T digital
terrestrial and DVB-C digital cable broadcasts cannot be guaranteed.
4. Some cable-TV providers may charge an additional fee for such a service and you may be required to agree to terms and
conditions of their business.
5.
providers.
6.
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG
N
2009-05-20 4:54:29
English - 3
English
N O T
Symbol Press Note
Contents
Connecting and Preparing Your TV
..........................................................................4
Using the Stand-Base...............................................................4
Assembling the Cables..............................................................4
Viewing the Control Panel.........................................................
Viewing the Connection Panel...................................................6
Remote Control.........................................................................8
Installing Batteries in the Remote Control.................................
............................
.................................................................
Placing Your Television in Standby Mode..................................
Viewing the Menus..................................................................10
........................................................10
................................................................ 11
Channel Control
Storing Channels...................................................................12
Managing Channels................................................................16
Picture Control
Changing the Picture Settings.................................................18
Setting up the TV with your PC...............................................21
PC Display...............................................................................22
Sound Control
Changing the Sound Setting...................................................2
Selecting the Sound Mode......................................................24
Function Description
Setting the Time......................................................................2
....................................................26
Support / Input
Supported Program.................................................................2
Source List / Edit Name...........................................................0
Network
................................................................1
.........................................................................4
Media Play
Connecting a USB Device.......................................................7
................................................8
Using and Sorting Photo List...................................................
Viewing a Photo or Slide Show..............................................40
Using and Sorting the Music List.............................................42
Playing a Music......................................................................4
Using and Sorting the Movie List.............................................44
...............................................................4
Picture / Music Settings Using Media Play..............................47
Using the Setup Menu.............................................................48
Media Play-DLNA
.......................................................4
Installing the DLNA Application...............................................4
Using the DLNA Application....................................................1
........................................................4
About Anynet+
Connecting Anynet+Devices ...................................................
Setting Up Anynet+.................................................................6
Switching between Anynet+Devices .......................................6
Recording................................................................................7
Listening through a Receiver...................................................8
Troubleshooting for Anynet+...................................................8
Content Library
Activating the Content Library.................................................
Using the Content Library........................................................60
Internet@TV
Getting Started with Internet@TV...........................................61
...................................................64
..........................................................64
..........................................66
........................................67
............................................67
.............................................68
.........................................6
Troubleshooting for internet@TV...........................................6
...........................................................................70
Internet@TV
Getting Started with Internet@TV...........................................71
Setting up Internet@TV...........................................................71
Using the Internet@TV service...............................................72
Troubleshooting for internet@TV............................................7
...........................................................................7
Home Network Centre
.............................................................74
.....................................7
...................................................76
........................................................77
Recommendations for Use
.......................................................................78
.....................................7
...................................80
How to attach the Stand-Base.................................................80
.....................................................81
Securing the Installation Space...............................................81
Troubleshooting.......................................................................82
..........................................................................8
2009-05-20 4:54:30
English - 4
Assembling the Cables
stand.
Using the Stand-Base
N
The PDP can rotate 20 degrees in right and left directions.N
-20° ~ 20°
Checking Parts
Instructions Remote Control/
AAA Batteries (2ea) Power Cord Cloth-Clean Program CD
Holder-Ring (4ea)
(Refer to page 80) Cover-Bottom Screw (4ea)
Power Cord
Headphone
Safety Guide Manual
Ferrite CoreN
The ferrite cores are used to shield the cables from interference.
plug.
Connecting and Preparing Your TV
BN68-02217A-Eng.indb 4 2009-05-20 4:54:32
English - 5
Viewing the Control Panel
Front Panel buttons
Touch each button to
operate.
1SOURCE
Toggles between all the available input sources
(TV, Ext1, Ext2, AV, Component, PC, HDMI1, HDMI2/DVI,
HDMI3, HDMI4, USB1, USB2).
In the on-screen menu, use this button as you would useN
the ENTER
E
button on the remote control.
2
MENU
3
+ –
Press to increase or decrease the volume. In the on-screen
menu, use the +–buttons as you would use the
4
CH
Press to change channels. In the on-screen menu, use the
CH
the remote control. You can use CH button to turn on
the TV without the remote control.
5
POWER INDICATOR
stand-by mode.
6 (
POWER)
Press to turn the TV on and off.
7
REMOTE CONTROL SENSOR
Aim the remote control towards this spot on the TV.
8
SPEAKERS
2009-05-20 4:54:33
English - 6
Viewing the Connection Panel
N
N
The product colour and shape may vary depending on the model.N
1LAN
2POWER IN
Connect the supplied power cord.
3COMPONENT IN
B / PR) inputs for
Component.
4PC IN (AUDIO / PC)
5EXT 1, EXT 2
video game device or video disc players.
N
and Audio.
In EXT Mode, Game mode is not availableN
Input/Output Specification
Connector Input
Video Audio(L/R) RGB Video + Audio(L/R)
EXT 1 ✔✔✔
is available.
EXT 2 ✔✔
6HEADPHONE
Connect a set of headphones if you wish to watch a television
program without disturbing other people in the room.
Prolonged use of headphones at a high volume mayN
damage your hearing.
7DIGITAL AUDIO OUT (OPTICAL)
Connect to a Digital Audio Component.
8SERVICE
Connector for service.
9AUDIO OUT(AUDIO R/L)
such as Audio equipment.
0ANT 2 IN(SATELLITE), ANT 1 IN
!HDMI IN 1, 2(DVI), 3
No additional Audio connection is needed for an HDMI to
HDMI connection.
-
N
- High Definition Multimedia interface allows the
multiple channels of digital audio.
- The HDMI/DVI terminal supports DVI connection to
supplied). The difference between HDMI and DVI is
that the HDMI device is smaller in size, has the HDCP
(High Bandwidth Digital Copy Protection) coding feature
installed, and supports multi - channel digital audio.
DVI AUDIO IN
Supported modes for HDMI/DVI and Component
480i 480p 720p 1080i 1080p
X X X
HDMI/DVI 60Hz X X X
Component
TV Rear Panel
Cable Television
Network
or
or
2
543 9 !7
0
8
6
1
2009-05-20 4:54:36
English - 7
1
COMMON INTERFACE Slot
Insert CI (CI+) (Common Interface) card into the slot.
(refer to page 26)
- serting CI (CI+) CARD in some channels,
Scramble Signal is displayed on the screen.
The- pairing information containing a telephone number,
CI (CI+) CARD ID, Host ID, and other information will be
displayed, please contact your service provider.
- informatio
the message Updating Completed is displayed,
indicating that the channel list is now updated.
N
CAM is not supported in some countries, regions andN
2
USB 1(HDD), USB 2
device which stores digitally encoded data.
3
HDMI IN 4
4
AV IN (VIDEO, AUDIO R/L)
camcorder or VCR.
The product colour and shape may vary depending on the model.N
TV Side Panel
3
4
1
2
2009-05-20 4:54:37
English - 8
Remote Control
The performance of the remote control may be affected by bright light.N
1
(turns the TV on and off)
2
Selects the TV mode directly.
3
Number buttons for direct channel
access
4
Press to switch to your favorite
channels.
5
Temporary sound switch-off
6
Volume increase
Volume decrease
7
Available source selection
8
Use to see information on the current
broadcast
9
functions.
0
Use to select on-screen menu items
and change menu values.
!
This function enables you to view
Internet@TV.
@
Use these buttons in the Channel list,
Media Play, and Internet@TV, etc.
$
Use to display Channel Lists on the
screen.
%
Use these buttons in the Media Play
and Anynet+, etc.
^
remote. This function is convenient
for using at night or when the room is
the ON/OFF(
will reduce the battery usage time.)
&
Previous channel
*
Previous channel
(
Displays the main on-screen menu
)
Electronic Program Guide (EPG)
display
a
Returns to the previous menu
b
c
This function enables you to view
Media Play
d
This function enables you to view
Content Library.
e
Digital subtitle display
f
Turn the audio description function on
or off.
Teletext Functions
2
(depending on the model)
7
8
9
@
#
broadcast
$
&
*
P
P
(
a
b
2009-05-20 4:54:38
English - 9
Installing Batteries in the Remote Control
1.
2. Install two AAA size batteries.
N
the compartment.
3. Close the cover.
N
remote control for a long time.
N
1.
2.
3.
4.
5.
Using the Remote Control Backlight Buttons
Use this feature in dark surroundings and when you are unable to see the remote control buttons clearly.
1. Press the ON/OFF( ) light button
NON, the button is turned on for a moment.
Pressing a remote coNntrol
Switching On and Off
The mains lead is attached to the rear of your set.
1.
The standby indicator lights up on your set.N
2. Press the POWERPbutton on your set.
You also can press theNPOWERP button or the TV button on the remote control to turn the TV on.
The programme that you were watching last is reselected automatically.N
3. </ >) button on the remote control or <CH>button on your set.
N
4. To switch your set off, press the POWERPbutton again.
Placing Your Television in Standby Mode
Your set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful when you wish to
1. Press the POWERPbutton on the remote control.
The screen is turned off and a red standby indicator appears on your set.N
2. POWERP</ >) button
again.
N
the set from the mains and aerial.
2009-05-20 4:54:39
English - 10
Viewing the Menus
1. MENU button. The main menu appears on the
Picture, Sound, Channel, Setup, Input,
Application, Support.
2. ENTER
E
3. Press the EXIT
The on-screen menus disappear from the screen after about one minute.N
Using the TOOLS Button
You can use the TOOLSTools menu changes depending on
1. Press the TOOLS button. The Tools menu will appear.
2. ENTER
E
button.
3. ENTER
E
buttons to display, change, or use the selected
page.
Anynet+
Picture Mode, see page 18
SRS TS HD, see page
Energy Saving, see page 27
Dual l ll, see page 24
Edit My Channels, see page 16
PIP, see page 28
Auto Adjustment, see page 21
Tools
Anynet+ (HDMI-CEC)
Pictur
Edit My Channels
U
Move
E
Enter
e
Mode
Standard
Auto Adjustment
Picture
2009-05-20 4:54:39
English - 11
Plug & Play Feature
N
N
If you accidentally select the wrong country for your TV, the characters on the screen may be wrongly displayed.N
1. Press the POWER button on the remote control. Select the OSD Language. menu
button. Press the ENTER
E
2. Store Demo or Home Use, then press the
ENTER
E
button.
NHome Use mode for the best picture in your
home environment.
Store DemoNmode is only intended for use in retail environments.
If the unit is accidentally set toNStore Demo mode and you want to return to Home Use
MENU
3. Press the ENTER
E
ENTER
E
choice.
4. ENTER
E
button.
Air
Cable
Satellite
5. ENTER
E
button to select Start.
NAir or Cable,
Digital & Analogue
Digital
Analogue
N
NSatellite
All
TV
Radio
Select the satellite and the scan mode to scan.N
TheNchannel search will start and end automatically.
6. The message Set the Clock Mode is displayed. Press the ENTER
E
Auto, then Press
the ENTER
E
button.
If you selectNManual, Set current date and time
If you have received a digital signal, the time will be set automatically.N
7. The brief instruction on How to get the best performance from your new HDTV is displayed. Press the ENTER
E
button.
This menu is availableNHD Connection Guide in the Support menu.
N/ button.
8. The message Enjoy your TV. is displayed.
If you want to view the TV immediately, select theNWatch TV.
If you want to view theNSee Product Guide, press the ENTER
E
button.
If you want to reset this feature...
1. Press the MENUSetup,
then press the ENTER
E
button.
2. Press the ENTER
E
button again to select Plug & Play.
3.
N
TheNPlug & Play feature is only available in the TV mode.
Plug & Play
E
Enter
Nederlands
English
Eesti
Setup
Plug & Play
Time
Language
Subtitle
Security
General
2009-05-20 4:54:40
English - 12
Storing Channels
Antenna❑Selects an appropriate type of antenna for digital broadcasts.
Air
Cable
Satellite
Country
❑
Digital Channel
Analogue Channel
The PIN number input screen appears. Enter your 4 digit PIN number.N
Auto Store❑You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated
porgramme numbers may not correspond to actual or desired programme numbers.
NChild Lock function, the PIN input window appears.
Air / Cable / Satellite
Digital & Analogue
Digital
Analogue
Provide a value to scan for cable channels.
Search Mode
Full / Network / Quick
Quick
N
Network ID-
Frequency-
Modulation-
Symbol Rate-
N
If you want to stop
NAuto Store, press the ENTERE
button.
The Stop Auto Store? message will be displayed.
Select YesENTERE
button.
Satellite
Scan Mode All / TV / Radio
N
After all the available channels are stored
N
Detail-
OK-
Channel Control
Continued...
Channel
Country
Auto Store
Manual Store
Mini Guide
2009-05-20 4:54:40
English - 13
Manual Store
❑
Digital Channel(Digital)
Digital Channel is only available in DTV mode.N
Channel 0~9) buttons.
Frequency 0~9) buttons.
Bandwidth or
N
Analogue Channel
Manual store for analogue channel.
Programme 0~9)
buttons.
Sound System BG / DK / I / L
Channel C(Air channel) or S
0~9) buttons to select the required number.
If there is abnormal sound or no sound, reselect the sound standard required.
N
Search
Store OK by pressing the ENTERE
button.
Channel modeN
- C
You can select a channel by entering the assigned number to each air broadcasting station in this mode
.
- S
Satellite
Satellite
Index
Scan Mode
Frequency
Symbol Rate
Polarity
Network Search
Signal Quality
Information on a satellite and its transponder is subject to change depending on the broadcasting conditions.N
Cable Search Option
❑
country)
Freq.Start
Freq.Stop
Modulation
Symbol Rate
If theNFreq.Start value is bigger than Freq.Stop value, the warning message is displayed.
Continued...
2009-05-20 4:54:40
English - 14
Full Guide / Mini Guide
❑
of date as a result of the information broadcast on a given channel. The display will dynamically update as soon as new information
becomes available.
Full Guide
Mini Guide
current programme onwards according to the programme starting time order.
Default Guide
❑
Full Guide / Mini Guide
You can decide whether to display either the Mini Guide or the Full Guide when the
GUIDE button on the remote control is pressed.
You can also display the guide menu simply by pressing theOGUIDE button.
Using the Full / Mini Guide
,
ENTER ENTEREbutton.
RED Toggle between the Mini Guide or Full Guide.
GREEN Full Guide
YELLOW Full Guide
BLUE
INFO INFO button for the detailed information.
Fine Tune
❑(Analogue channel only)
N*on the right-hand side of the channel number in the
channel banner.
N
NResetENTERE
button.
Channel
Mini Guide
Channel List
Satellite System Setup
No Detailed Information
Today
Loaded
The Distillery
Smash Hits! Sunday
Street Hypn..
Kisstory
No Information
No Information
No Information
Mini Guide
Street Hypnosis
Booze Britain
Information
Page
Information
Page
Mini Guide
+24 Hours
Continued...
BN68-02217A-Eng.indb 14 2009-05-20 4:54:42
English - 15
Satellite System Setup
❑Set the LNB used for receiving broadcasting signal.
Satellite System SetupNis available when Antenna is set to Satellite.
The PIN input window appears.N
Before runningNAuto Store, set Satellite System Setup. Then channel scan is run
normally.
LNB Power
Enables or disables the power supply for the LNB.
Set whether TV provides power supply of LNB.
connecting to two TVs.
LNB Settings
Satellite
Transponder
DiSEqC Mode
Lower LNB Oscillators
Upper LNB Oscillators
Tone 22 KHz
Signal Quality
Positioner Settings
Positioner
Positioner Type
(Universal Satellite Automatic Location Sysem).
User Mode
store the current position of satellite antenna according to a certain satellite, when the
signal of that satellite is needed, the satellite antenna can be moved to pre-populated
position.
Satellite-
Transponder-
Moving Mode-
movement.
Step Size- Step Size is
available when Moving Mode is set to Step.
Go To Stored Position-
Antenna Position-
Store Current Position-
Signal Quality-
Limit Position-
Antenna Position-
Store Current Position-
Go To Zero-
Reset Positioner Limit-
Reset All settings
All satellite settings will be reset to the initial values.
LNB Settings
Signal Quality 0
U
Move
E
Enter
R
Return
Satellite System Setup
LNB Settings
Positioner Settings
Reset All Settings
U
Move
E
Enter
R
Return
Positioner Settings
User Mode
Installer Mode
U
Move
E
Enter
R
Return
User Mode
Go To Stored Position
l rEast
Store Current Position
Signal Quality 0
U
Move
E
Enter
R
Return
2009-05-20 4:54:42
English - 16
Managing Channels
guide for digital broadcasts.
Select a channel in theNChannels, My Channels, or Scheduled screen by pressing
ENTEREbutton.
Then you can watch the selected channel.
Channels Shows all currently available channels.
My Channels Shows all favourite channels.
Scheduled Shows all current reserved programmes.
Press theOCH LIST button on the remote control to bring up the channel lists.
Using the Colour buttons with the Channel ListN
Red- Air, Cable and Satellite.
Green-
Yellow-
Blue-
to Satellite)
T
- TOOLS Search, Edit My Channels, Lock (or Unlock),
Timer Viewing, Edit Channel Name, Edit Channel Number, Sort, Delete, Select
All (or Deselect All), or Reorder menu.
(The Tools menus may differ depending on the situation.)
Channel Status Display IconsN
AAn Analogue channel. cA channel selected by pressing the
yellow button.
(A programme currently being
broadcast.
\ )A reserved programme
Channel List Tools Menu (in Channels / My Channels / Scheduled)
❑Press theNTOOLS button to use the Tools menu.
TheNTools menu items may differ depending on the channel status.
(Searched channel only)
Set the item (Channel Type, Satellite Name, Provider Name, Transponder,
Scramble) in order to search.
This menu is only supported whenNAntenna is Satellites.
Edit My Channels
You can set the selected channels to desired my channels group.
N
Lock / Unlock
Child Lock is
set to on. (see page 27)
The PIN number input screen appears. Enter your 4 digit PIN number.N
N
N\
Channel
Mini Guide
Channel List
Satellite System Setup
A
1 C --
A
2 C
--
A
--
A
4 C
--
A
--
A
6 C
--
A
7 C
--
A
8 C
--
All
TV
Radio
Channels
Air
Antenna
Zoom
Select
Sort Page
Tools
A
1 C --
A
2 C
--
A
C
--
A
4 C
--
A
--
A
6 C
--
A
7 C
--
A
8 C
--
Channels
Edit My Channels
Timer Viewing
Edit Channel Name
Sort
Delete
All
TV
Radio
Air
Antenna
Zoom
Select
Sort Page
Tools
Continued...
2009-05-20 4:54:43
English - 17
Timer Viewing
If you reserve a programme you want to watch, the channel is automatically switched to the reserved channel in the Channel List;
N
You can set the channel, month, day, year, hour and minute directly by pressing the number buttons on the remote control.N
Reserving a programme will be shown onNSchduled menu.
Digital Programme Guide and Viewing ReservationN
You can reserve a programme according to the procedures described above.
Edit Channel Name(Analogue channel only)
Channels can be labeled so that their call letters appear whenever the channel is selected.
The names of digital broadcasting channels are automatically assigned and cannot be labeled.N
Edit Channel Number
(Digital channel only)
You can also edit the channel number by pressing the number buttons on the remote control.
Sort(Analogue channel only)
This operation allows you to change the programme numbers of the stored channels. This operation may be necessary after using
the auto store.
Reorder(when the Antenna was set to Satellite)
Rearrange the channel list in numerical order.
Delete
You can delete a channel to display the channels you want.
You can also delete a channel at the My Channels or Satellites menu in the same manner.
Select All / Deselect All
You can deselect or select all channels in the channel list.
N
the same time. Select the required channels and press the yellow button to set all the selected channels at the same time.
TheNc
You can only selectNDeselect All when there is a selected channel.
Channel List Tools Menu (
❑in Scheduled )
You can view, modify or delete a reservation.
Press theNTOOLS button to use the Tools menu.
Change Info
Cancel Schedules
Information
information.)
Select All / Deselect All
Scheduled
Quincy, M.E
Change Info
Cancel Schedules
Information
Select All
Air
Zoom
Select
Tools
Information
2009-05-20 4:54:44
English - 18
Changing the Picture Settings
Mode
❑You can select the type of picture which best corresponds to your viewing requirements.
Dynamic / Standard / Eco / Movie
Press the
TTOOLS button to display Tools menu.
You can also set the picture mode by selecting .
Cell Light / Contrast / Brightness / Sharpness / Colour / Tint (G/R)
❑Your television has several setting options that allow you to control the picture quality.
Cell Light
Contrast
Brightness
Sharpness
Colour
Tint (G/R)
NCell Light, Contrast, Brightness, Sharpness, Colour or Tint (G/R)
accordingly.
The adjusted values are saved for each picture mode.N
In AnalogueNTV, Ext., AV
InNPCCell Light, Contrast and Brightness.
Each adjusted setting will be stored separately according to its input mode.N
N
will reduce the overall running cost.
Advanced Settings
❑You can adjust the advanced settings for your screen including the colour and contrast.
Advanced SettingsNis available in Standard or Movie mode.
InNPCDynamic Contrast, Gamma and
White Balance from among the Advanced Settings items.
Black Tone Off / Dark / Darker / Darkest
Dynamic Contrast Off / Low / Medium / High
You can adjust the screen contrast so that the optimal contrast is provided.
Gamma
You can adjust the primary colour (Red, Green, Blue) Intensity.
Colour Space
most natural colour.
Auto Automatically sets the colour range depending on the input video source.
Native Sets the colour range wider than the that of the input video source.
Custom
Customizing the Colour Space
N
- Adjusts the Colour range to suit your preference. Colour is available when Colour Space is set to Custom.
- Colour Red / Green / Blue / Yellow / Cyan / Magenta
- Red / Green / Blue
- Reset
Picture Control
Continued...
Auto Adjustment
Picture
Auto Adjustment
Screen
Advanced Settings
Picture Reset
Picture
2009-05-20 4:54:44
English - 19
White Balance
You can adjust the colour temperature for more natural picture colours.
R-Offset / G-Offset / B-Offset / R-Gain / G-Gain / B-Gain
Reset
Flesh Tone
Changing the adjustment value will refresh the adjusted screen.N
Edge Enhancement Off / On
You can emphasize object boundaries in the picture.
xvYCCNis available when the picture mode is set to MovieHDMI or Component mode.
N
Picture Options
❑You can customize the additional picture settings to suit your preference.
InNPCColour Tone, Size and Screen
Burn Protection from among the items in Picture Options.
Colour Tone Cool / Normal / Warm1 / Warm2 / Warm3
You can select the most comfortable colour tone to your eyes.
The adjusted values are stored according to the selectedNPicture mode.
Warm1, Warm2,Nor Warm3 is only activated when the picture mode is Movie.
You can select the picture size which best corresponds to your viewing requirements.
Auto Wide
Wide Zoom
vertically.
Zoom
Screen Fit
Depending on the input source, the picture size options may vary.
N
The items available may differ depending on the selected mode.
N
In
NPC
N( , ) mode has been set in PIP, the Picture Size cannot be set.
N
Temporary image retention may occur when viewing a static image on the set for more than two hours.
N
Wide Zoom
NPosition, then press the ENTEREbutton.
ENTEREbutton.
Zoom
NPosition, then press the ENTERE
picture up and down. Then press the ENTERESize, then press the ENTEREbutton.
ENTEREbutton.
After selecting
NScreen Fit in HDMI (1080i / 1080p) or Component Position by pressing
Reset
NReset, then press the ENTEREbutton. You can initialize the setting.
If you use the
NScreen Fit function with HDMI 720p input, 1 line will be cut at the top, bottom, left and right as in the overscan
function.
Screen Mode
Auto Wide
intended for users to select it.
This function is available inNAuto Wide mode.
This function is not available inNPC, Component or HDMI mode.
Continued...
Screen
Advanced Settings
Picture Options
Picture Reset
Picture
2009-05-20 4:54:44
English - 20
Digital NROff / Low / Medium / High / Auto
and ghosting that may appear on the screen.
N
HDMI Black LevelNormal / Low
N
This function is not available in PC, Game or Media Play mode.N
Film Mode
You can optimize the picture mode for watching movies.
Off
Auto1
Auto2
Cinema Smooth
An 1080p 24Hz HDMI signal must be input to use the Cinema Smooth function.N
N
signal. Real 100Hz demo mode is provided for shop demonstration with special pictures.
as DVD players, Home Theaters, etc.
Blue Only ModeNis available when the picture mode is set to Movie or Standard.
Screen Burn Protection
To reduce the possibility of screen burn, this unit is equipped with screen burn prevention technology. This technology enables you
to set picture movement up/down (Vertical) and side to side (Horizontal). The Time setting allows you to program the time between
movement of the picture in minutes.
Pixel Shift
image on the screen.
N
Item TV/Ext./AV/Component/HDMI/PC
Horizontal 0~2 2
Vertical 0~4 4
Time (minute) 1~4 min 2 min
N
This function is not available in the
NScreen Fit mode.
Scrolling
Use this function when there are remaining after images or symbols on the screen especially when you displayed a still image
on the screen for a long time.
Side Grey
- Light
- Dark
Continued...
2009-05-20 4:54:45
Table of contents
Languages:
Other Samsung Plasma TV manuals
Samsung
Samsung PS42A456 User manual
Samsung
Samsung PN50B860Y2FXZA User manual
Samsung
Samsung PDP-TELEVISION User manual
Samsung
Samsung PS50A756T1M User manual
Samsung
Samsung PN59D7000FF User manual
Samsung
Samsung WMN5090A User manual
Samsung
Samsung ps59d530a5w User manual
Samsung
Samsung PN50C7000YFXZA User manual
Samsung
Samsung PS51E450A1WXZF User manual
Samsung
Samsung PS-42S4S User manual
Samsung
Samsung PS42A456P2D User manual
Samsung
Samsung Series 4+ User manual
Samsung
Samsung PN51E530 User manual
Samsung
Samsung PS-42E71H User manual
Samsung
Samsung PN50C550G1FXZA User manual
Samsung
Samsung HPS5033 - 50" Plasma TV User manual
Samsung
Samsung PS42A416 User manual
Samsung
Samsung PS-37S4A1 User manual
Samsung
Samsung series 6 650 User manual
Samsung
Samsung PN59D530A3F User manual
