Samsung Series 4+ User manual

Plasma TV
user manual
BN68-01924A-00
Thank you for purchasing this Samsung product.
To receive more complete service, please
register your product at
www.samsung.com/global/register
Model Serial No.
imagine the possibilities
Contact SAMSUNG WORLD-WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
Contacte con SAMSUNG WORLD WIDE
Si tiene alguna pregunta o comentario referente a nuestros productos, por favor contacte con nuestro Servicio de Atención
al Cliente.
Country Customer Care Center Web Site
ARGENTINE 0800-333-3733 www.samsung.com/ar
BRAZIL 0800-124-421
4004-0000 www.samsung.com/br
CHILE 800-SAMSUNG(726-7864) www.samsung.com/cl
COLOMBIA 01-8000112112 www.samsung.com.co
COSTA RICA 0-800-507-7267 www.samsung.com/latin
ECUADOR 1-800-10-7267 www.samsung.com/latin
EL SALVADOR 800-6225 www.samsung.com/latin
GUATEMALA 1-800-299-0013 www.samsung.com/latin
HONDURAS 800-7919267 www.samsung.com/latin
JAMAICA 1-800-234-7267 www.samsung.com/latin
MEXICO 01-800-SAMSUNG(726-7864) www.samsung.com/mx
NICARAGUA 00-1800-5077267 www.samsung.com/latin
PANAMA 800-7267 www.samsung.com/latin
PUERTO RICO 1-800-682-3180 www.samsung.com/latin
REP. DOMINICA 1-800-751-2676 www.samsung.com/latin
TRINIDAD & TOBAGO 1-800-SAMSUNG(726-7864) www.samsung.com/latin
VENEZUELA 0-800-100-5303 www.samsung.com/latin
BN68-브라질450A.indb 1 2009-03-17 오후 8:52:31

Important Warranty Information Regarding Television Format Viewing
Wide screen format PDP Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide
screen format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format,
or expanded to fill the screen if your model offers this feature and the images are constantly moving. Displaying stationary
graphics and images on screen, such as the dark side-bars on nonexpanded standard format television video and
programming, should be limited to no more than 5% of the total television viewing per week.
Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos,
web sites or computer graphics and patterns, should be limited as described above for all televisions. Displaying stationary
images that exceed the above guidelines can cause uneven aging of PDP Displays that leave subtle, but permanent
burned-in ghost images in the PDP picture. To avoid this, vary the programming and images, and primarily display
full screen moving images, not stationary patterns or dark bars.
On PDP models that offer picture sizing features, use these controls to view different formats as a full screen picture.
Be careful in the selection and duration of television formats used for viewing. Uneven PDP aging as a result of format
selection and use, as well as burned-in images, are not covered by your Samsung limited warranty.
© 2009 Samsung Electronics Co., Ltd. All rights reserved.
English - 2
BN68-브라질450A.indb 2 2009-03-17 오후 8:52:31

User Instructions
Screen Image retention
Do not display a still image (such as on a video game) on the plasma display panel for more than several minutes as it can cause
screen image retention. This image retention is also known as “screen burn”. To avoid such image retention, refer to page 23 of this
manual to reduce the degree of brightness and contrast of the screen when displaying a still image.
Altitude
The PDP can only operate normally at heights under 6500ft.
Heat on the top of the Plasma TV
The top side of the product may be hot after long periods of use as heat dissipates from the panel through the vent hole in the upper
part of the product.
This is normal and does not indicate any defect or operation failure of the product.
However, children should be prevented from touching the upper part of the product.
The product is making a ‘cracking’ noise.
A ‘cracking’ noise may occur when the product contracts or expands due to a change in the surrounding environment such as
temperature or humidity. This is normal and not a defect of the unit.
Cell Defects
The PDP uses a panel consisting of 2,360,000(HD-level) to 6,221,000(FHD-level) pixels which require sophisticated technology to
produce. However, there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the
product.
Avoid operating the TV at temperatures below 41°F (5°C)
A still image displayed too long may cause permanent damage to the PDP Panel.
Watching the Plasma TV in 4:3 format for a long period of time may leave traces of borders displayed on
the left, right and center of the screen caused by the difference of light emission on the screen.
Playing a DVD or a game console may cause similar effects to the screen.
Damages caused by the above effect are not covered by the Warranty.
After-images on the Screen.
Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images.
To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images for a long time.
Warranty
Warranty does not cover any damage caused by image retention.
Burn-in is not covered by the warranty.
Installation
Be sure to contact an authorized service centre, when installing your set in a location with heavy dust, high or low temperatures, high
humidity, chemical substance and where it operates continually such as the airport, the train station etc. Failure to do so may cause a
serious damage to your set.
English - 3
BN68-브라질450A.indb 3 2009-03-17 오후 8:52:31

Contents
Symbol
N O T
Press Note One-Touch Button TOOLS
Connecting and Preparing Your TV
List of Features..........................................................................5
Checking Parts ..........................................................................5
Viewing the Control Panel ......................................................... 6
Viewing the Connection Panel...................................................7
Remote Control .........................................................................8
Connections
Connecting VHF and UHF Antennas.........................................9
Connecting Cable TV ................................................................ 9
Connecting a DVD / Blu-Ray Player or Cable Box / Satellite
receiver (Set-Top Box) via HDMI............................................. 11
Connecting a DVD /Blu-Ray Player or Cable Box / Satellite
receiver (Set-Top Box) via DVI ................................................ 11
Connecting a DVD / Blu-Ray Player or Cable Box / Satellite
receiver (Set-Top Box) via Component cables ........................ 12
Connecting a Camcorder ........................................................12
Connecting a VCR...................................................................13
Connecting an Amplier / DVD Home Theater........................14
Connecting a PC ..................................................................... 15
Operation
Turning the TV On and Off ...................................................... 16
Changing Channels.................................................................16
Adjusting the Volume...............................................................16
Using the TOOLS Button.........................................................17
Viewing the Display ................................................................. 17
Viewing the Menus .................................................................. 18
Plug & Play Feature ................................................................19
Channel Control
Storing Channels.....................................................................20
Managing Channels ................................................................ 20
Picture Control
Changing the Picture Settings.................................................21
Using the 3D Function.............................................................24
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
PC Display
Using Your TV as a Computer (PC) Display............................25
Display Modes.........................................................................26
Setting up the TV with your PC ............................................... 26
Sound Control
Changing the Sound Settings.................................................. 27
Function Description
Conguring the Setup Menu.................................................... 29
Viewing the Picture in Picture (PIP).........................................31
Setting the Time ...................................................................... 32
Source List / Edit Name...........................................................33
Anynet+
Connecting Anynet+Devices ..................................................34
Setting Up Anynet+ .................................................................35
Scanning and Switching between Anynet+Devices................35
Recording ................................................................................ 36
Listening through a Receiver (Home theater) .........................37
Troubleshooting for Anynet+.................................................. 37
Appendix
Troubleshooting.......................................................................38
Preparation before installing the Wall-Mount...........................39
Using the Stand-Base .............................................................39
How to attach the Stand-Base................................................. 39
Securing the TV to the Wall.....................................................40
Securing the Installation Space...............................................40
Wall Mount Kit Specications (VESA) .....................................41
Specications ..........................................................................42
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
English
English - 4
BN68-브라질450A.indb 4 2009-03-17 오후 8:52:31

List of Features
Adjustable picture settings that can be stored in the TV’s memory.
Automatic timer to turn the TV on and off.
A special sleep timer.
Excellent Digital Interface & Networking :
With a built-in HD digital tuner, non-subscription HD broadcasts can be viewed with no Cable Box/Satellite receiver (Set-Top Box)
needed.
HDMI/DVI connection of your PC to this TV.
SRS TruSurround HD provides a virtual surround system.
Checking Parts
Please make sure the following items are included with your TV. If any items are missing, contact your dealer.
The items' color and shape may vary depending on the model.
Remote Control /
AAA Batteries (Not available in all
locations)
Power Cord Owner’s Instructions Warranty Card /
Safety Guide Manual
(Not available in all locations)
Cleaning Cloth Cover-Bottom
(Refer to page 39)
Holder-Ring (4ea)
(Refer to page 39)
•
•
•
•
•
•
N
Connecting and Preparing Your TV
English - 5
BN68-브라질450A.indb 5 2009-03-17 오후 8:52:32

Viewing the Control Panel
The buttons on the lower-right panel control your TV’s basic features, including the on-screen menu.
To use the more advanced features, you must use the remote control.
The product color and shape may vary depending on the model.
If you touch the front panel button, the each button will be operated.
1
SOURCE E
Toggles between all the available input sources
(TV, AV1, AV2, Component1, Conponent2, PC, HDMI1, HDMI2/DVI, HDMI3).
In the on-screen menu, use this button as you use the ENTER
E
button on the remote control.
2
MENU
Press to see an on-screen menu of your TV’s features.
3
+ VOL –
Press to increase or decrease the volume. In the on-screen menu, use the + VOL – buttons as you would use the
◄ and ► buttons on the remote control.
4
<CH >
Press to change channels. In the on-screen menu, use the <CH > buttons as you would use the ▲ and ▼ buttons on the
remote control.
5
POWER INDICATOR
Blinks and turns off when the power is on and lights up in stand-by mode.
6
P(POWER)
Press to turn the TV on and off.
7
REMOTE CONTROL SENSOR
Aim the remote control towards this spot on the TV.
8
SPEAKERS
N
N
English - 6
BN68-브라질450A.indb 6 2009-03-17 오후 8:52:32

Viewing the Connection Panel
Use the connection panel jacks to connect A/V components that will be connected continuously, such as Blu-Ray DVD Players
or a VCR.
The product color and shape may vary depending on the model. N
1 POWER IN
Connects the supplied power cord.
2
SERVICE
Connect for service only.
3
PC IN
Connects to the video output jacks on your PC.
4
PC/DVI (HDMI2) AUDIO IN
Connect to the audio output jack on your PC.
This jack is also used as DVI audio output jack.
5
HDMI IN 1, 2, 3
Connect to the HDMI jack of a device with an HDMI output.
(HDMI 2 supports HDMI-DVI IN and connection from a PC.)
HDMI 2 can also be used as a DVI connection with
separate analog audio inputs. An optional HDMI/DVI
cable will be necessary to make this connection.
When using an optional HDMI/DVI adapter, the DVI
analog audio inputs on your TV allow you to receive left
and right audio from your DVI device.
6 ANT IN
Uses a 75Ω Coaxial connector for an Air/Cable Network.
-
-
7 AUDIO OUT (R/L)
Audio outputs to external devices.
8 3D SYNC OUT
Connect to 3D IR Emitter.
9 HEADPHONES JACK
You can connect a set of headphones if you wish to watch a
television programme without disturbing the other people in
the room.
Prolonged use of headphones at a high volume may
damage your hearing.
0 COMPONENT IN 1, 2 / AV IN 1
Connects Component video / audio. The COMPONENT IN 1
jack is also used as the AV IN 1 jack.
Connect the video cable to the COMPONENT IN 1
[Y/VIDEO] jack and the audio cable to the COMPONENT
IN 1 [R-AUDIO-L] jacks.
!
AV IN 2 (VIDEO / AUDIO R/L)
Video and audio inputs for external devices.
N
N
English - 7
TV Rear Panel TV Side Panel
BN68-브라질450A.indb 7 2009-03-17 오후 8:52:33

Remote Control
You can use the remote control up to a distance of about 23 feet from the TV.
The product color and shape may vary depending on the model.
The performance of the remote control may be affected by bright light.
N
N
1
POWER
Turns the TV on and off.
2
NUMERIC BUTTONS
Press to change the channel.
3
Use to select a channel over 100.
For example, for channel 122, press “-”,
then “2”, then “2”.
4
MUTE
Press to temporarily cut off the sound.
5
VOL
Press to increase or decrease the volume.
6
SOURCE
Press to display all of the available video
sources.
7
CH LIST
Use to display Channel Lists on the screen.
8
TOOLS
Use to quickly select frequently used
functions.
9
UP▲/DOWN▼/LEFT◄/
RIGHT►/ENTER
Use to select on-screen menu items and
change menu values.
0
INFO
Press to display information on the TV
screen.
!
COLOR BUTTONS
Use these buttons in the Channel list.
@
MEDIA.P
Not available.
#
MTS
Press to choose stereo, mono or Separate
Audio Program (SAP broadcast).
$
Use these buttons in the DMA, Anynet+
modes. ( : This remote can be used to
control recording on Samsung recorders
with the Anynet+ feature)
%
TV
Selects the TV mode directly.
^
PRE-CH
Tunes to the previous channel.
&
CH
Press to change channels.
*
MENU
Displays the main on-screen menu.
(
FAV.CH
Press to switch to your favorite channels.
)
RETURN
Returns to the previous menu.
a
EXIT
Press to exit the menu.
b P.SIZE
Press to change the screen size.
c SRS
Selects SRS TruSurround HD mode.
d CC
Controls the caption decoder.
e GUIDE
Not available
Installing Batteries in the Remote Control
1. Lift the cover at the back of the remote control upward as shown in the gure.
2. Install two AAA size batteries.
Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment.
3. Close the cover as shown in the gure.
Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a
long time. (Assuming typical TV usage, the batteries should last for about one year.)
If the remote control doesn’t work, check the following
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power outage or is the power cord unplugged?
5. Is there a special uorescent light or neon sign nearby?
❑
N
N
N
English - 8
BN68-브라질450A.indb 8 2009-03-17 오후 8:52:33

Connecting VHF and UHF Antennas
If your antenna has a set of leads that look like this, see “Antennaswith300ΩFlatTwin
Leads below.”
Ifyourantennahasoneleadthatlookslikethis,see“Antennaswith75ΩRoundLeads.”
If you have two antennas, see “Separate VHF and UHF Antennas.”
Antennaswith300ΩFlatTwinLeads
Ifyouareusinganoff-airantenna(suchasaroofantennaorrabbitears)thathas300Ω
twin flat leads, follow the directions below.
1. Place the wires from the twin leads under the screws on a 300-75 Ω adapter (not supplied).
Use a screwdriver to tighten the screws.
2. Plug the adaptor into the ANT IN terminal on the back of the TV.
Antennaswith75ΩRoundLeads
Plug the antenna lead into the ANT IN terminal on the back of the TV.
Separate VHF and UHF Antennas
If you have two separate antennas for your TV (one VHF and one UHF), you must
combine the two antenna signals before connecting the antennas to the TV. This
procedure requires an optional combiner-adaptor (available at most electronics shops).
1. Connect both antenna leads to the combiner.
2. Plug the combiner into the ANT IN terminal on the bottom of the back panel.
Connecting Cable TV
To connect to a cable TV system, follow the instructions below.
Cable without a Cable Box
Plug the incoming cable into the ANT IN terminal on the back of the TV.
Because this TV is cable-ready, you do not need a cable box to view unscrambled cable
channels.
Connecting to a Cable Box that Descrambles All Channels
1. Find the cable that is connected to the ANT OUT terminal on your cable box.
This terminal might be labeled “ANT OUT”, “VHF OUT” or simply, “OUT”.
2. Connect the other end of this cable to the ANT IN terminal on the back of the TV.
Continued...
❑
❑
❑
❑
N
❑
N
Connections
English - 9
ANT IN
ANT IN
UHF
VHF
ANT IN
UHF
VHF
ANT IN
ANT OUT
ANT IN
ANT IN
BN68-브라질450A.indb 9 2009-03-17 오후 8:52:34

Connecting to a Cable Box that Descrambles Some Channels
If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You
will need a two-way splitter, an RF (A/B) switch, and four lengths of Antenna cable. (These items are available at most
electronics stores.)
1. Find and disconnect the cable that is
connected to the ANT IN terminal on your
cable box.
This terminal might be labeled “ANT IN”,
“VHF IN” or simply, “IN”.
2. Connect this cable to a two-way splitter.
3. Connect an Antenna cable between the
OUTPUT terminal on the splitter and the IN
terminal on the cable box.
4. Connect an Antenna cable between the ANT
OUT terminal on the cable box and the B–IN
terminal on the RF(A/B) switch.
5. Connect another cable between the other
OUT terminal on the splitter and the A–IN
terminal on the RF (A/B) switch.
6. Connect the last Antenna cable between the
OUT terminal on the RF (A/B) switch and the
ANT IN terminal on the rear of the TV.
After you have made this connection, set the A/B switch to the “A” position for normal viewing. Set the A/B switch to the “B” position
to view scrambled channels. (When you set the A/B switch to “B”, you will need to tune your TV to the cable box’s output channel,
which is usually channel 3 or 4.)
❑
N
English - 10
Splitter
Cable Box
RF (A/B)
Switch
Incoming
cable
Splitter
Incoming
cable
Splitter
Cable Box
Incoming
cable
Splitter
Incoming
cable
TV Rear
RF (A/B)
Switch
ANT IN
ANT IN
Splitter
Incoming
cable
RF (A/B)
Switch
Cable Box
BN68-브라질450A.indb 10 2009-03-17 오후 8:52:35

Connecting a DVD / Blu-Ray Player or Cable Box / Satellite receiver
(Set-Top Box) via HDMI
This connection can only be made if there is an HDMI Output jack on the external device. This connection will provide the
highest quality picture.
1. Connect an HDMI Cable between the HDMI IN (1, 2(DVI), or 3) jack on the TV and the HDMI jack on the Connecting the DVD / Blu-
Ray Player or Cable Box / Satellite receiver (Set-Top Box).
What is HDMI?
HDMI, or high-de nition multimedia interface, is an interface that enables the transmission of digital audio and video signals using a
single cable.
The difference between HDMI and DVI is that the HDMI device is smaller in size and has the HDCP (High Bandwidth Digital Copy
Protection) coding feature installed.
Each DVD Player or Cable Box / Satellite receiver (Set-Top Box) has a different back panel con guration.
The TV may not output sound and pictures may be displayed with abnormal color when DVD / Blu-Ray Player or Cable Box /
Satellite receiver supporting HDMI versions older than 1.3 are connected. When connecting an older HDMI cable and there is no
sound, connect the HDMI cable to the HDMI IN 2 jack and the audio cables to the DVI IN (HDMI2) [R-AUDIO-L] jacks on the back
of the TV. If this happens, contact the company that provided the DVD / Blu-Ray Player or Cable Box / Satellite receiver to con rm
the HDMI version, then request an upgrade.
HDMI cables that are not 1.3 may cause annoying  icker or no screen display.
Connecting a DVD /Blu-Ray Player or Cable Box / Satellite receiver
(Set-Top Box) via DVI
This connection can only be made if there is a DVI Output jack on the external device.
1. Connect a HDMI/DVI Cable or DVI-HDMI Adapter between the HDMI IN 2(DVI) jack on the TV and the DVI jack on the DVD / Blu-
Ray Player or Cable Box/Satellite receiver (Set-Top Box).
2. Connect Audio Cables between the DVI IN (HDMI 2) [R-AUDIO-L] jack on the TV and the DVD/Blu-Ray Player or Cable Box /
Satellite receiver.
Each DVD / Blu-Ray Player or Cable Box / Satellite receiver (Set-Top Box) has a different back panel con guration.
When connecting a DVD Player or Cable Box / Satellite receiver (Set-Top Box), match the color of the connection terminal to the
cable.
When using an HDMI / DVI cable connection, you must use the HDMI IN 2(DVI) jack.
N
•
•
N
N
N
N
N
N
English - 11
DVD/Blu-Ray Player or Cable
Box / Satellite receiver
TV Rear Panel TV Side Panel
or
HDMI Cable (Not supplied)
1
DVD/Blu-Ray Player or Cable Box /
Satellite receiver
TV Rear Panel
Audio Cable (Not supplied)2
HDMI/DVI Cable (Not supplied)
1
BN68-브라질450A.indb 11 2009-03-17 오후 8:52:37

Connecting a DVD / Blu-Ray Player or Cable Box / Satellite receiver
(Set-Top Box) via Component cables
The rear panel jacks on your TV make it easy to connect a DVD/Blu-Ray Player or Cable Box / Satellite receiver (Set-Top Box)
to your TV.
1. Connect Component Cable between the COMPONENT IN (1 or 2) [Y, PB, PR] jacks on the TV and the COMPONENT [Y, PB, PR]
jacks on the DVD Player or Cable Box / Satellite receiver(Set-Top Box).
2. Connect Audio Cables between the COMPONENT IN (1 or 2) [R-AUDIO-L] jacks on the TV and the AUDIO OUT jacks on the DVD
Player or Cable Box / Satellite receiver (Set-Top Box).
Component video separates the video into Y (Luminance (brightness)), PB(Blue) and PR(Red) for enhanced video quality. Be sure
to match the component video and audio connections. For example, if connecting the video cable to COMPONENT IN 1, connect
the audio cable to COMPONENT IN 1 also.
Each DVD / Blu-Ray Player or Cable Box / Satellite receiver (Set-Top Box) has a different back panel con guration.
When connecting a DVD / Blu-Ray Player or Cable Box / Satellite receiver (Set-Top Box), match the color of the connection terminal
to the cable.
Connecting a Camcorder
The side panel jacks on your TV make it easy to connect a camcorder to your TV.
They allow you to view the camcorder tapes without using a VCR.
Using the Video / Audio Cable
1. Connect a Video Cable between the AV IN 2 [VIDEO] jack on the TV and the VIDEO OUT jack on the camcorder.
2. Connect Audio Cables between the AV IN 2 [L-AUDIO-R] jacks on the TV and the AUDIO OUT jacks on the Camcorder.
Each Camcorder has a different back panel con guration.
When connecting a Camcorder, match the color of the connection terminal to the cable.
N
N
N
❑
N
N
English - 12
DVD / Blu-Ray Player or Cable Box
/ Satellite receiver
TV Rear Panel
Audio Cable (Not supplied)
Component Cable (Not supplied)1
2
Camcorder
TV Side Panel
Video Cable (Not supplied)1
Audio Cable (Not supplied)2
BN68-브라질450A.indb 12 2009-03-17 오후 8:52:38

Using the HDMI Cable
1. Connect an HDMI Cable between the HDMI IN (1, 2(DVI) ou 3) jack on the TV and the HDMI jack on the camcorder.
Each Camcorder has a different back panel con guration.
❑
N
Connecting a VCR
Video Connection
These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the
instructions on pages 9~10). Skip step 1 if you have not yet connected to an antenna or a cable system.
1. Unplug the cable or antenna from the back of the TV.
2. Connect the cable or antenna to the ANT IN terminal on the back of the VCR.
3. Connect an Antenna Cable between the ANT OUT terminal on the VCR and the ANT IN terminal on the TV.
4. Connect a Video Cable between the AV IN 1 [Y/VIDEO] or AV IN 2 [VIDEO] jack on the TV and the VIDEO OUT jack on the
VCR.
5. Connect Audio Cables between the AV IN 1 (or AV IN 2) [R-AUDIO-L] jacks on the TV and the AUDIO OUT jacks on the VCR
If you have a “mono” (non-stereo) VCR, use a Y-connector (not supplied) to connect to the right and left audio input jacks of the
TV. Alternatively, connect the cable to the “R” jack.
If your VCR is stereo, you must connect two cables.
Each VCR has a different back panel con guration.
When connecting a VCR, match the color of the connection terminal to the cable.
When connecting to AV IN 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not match the color of the video cable (Yellow).
❑
N
N
N
N
English - 13
Camcorder
TV Side Panel
TV Rear Panel
HDMI Cable (Not supplied)1 or
VCR Rear Panel
TV Rear Panel
2Audio Cable(Not supplied)
Video Cable(Not supplied)
Antenna cable(Not supplied)3
4
5
TV Side Panel
BN68-브라질450A.indb 13 2009-03-17 오후 8:52:40

Connecting an Amplifier / DVD Home Theater
1. Connect Audio Cables between the AUDIO OUT [R-AUDIO-L] jacks on the TV and AUDIO IN [L-AUDIO-R] jacks on the Ampli er/
DVD Home Theater.
When an audio ampli er is connected to the AUDIO OUT [R-AUDIO-L] jacks terminals : Decrease the volume of the TV, and adjust
the volume level with the Ampli er’s volume control.
Each Ampli er / DVD Home Theater has a different back panel con guration.
When connecting an Ampli er / DVD Home Theater, match the color of the connection terminal to the cable.
N
N
English - 14
Amplifier / DVD Home Theater
TV Rear Panel
Audio Cable (Not supplied)
BN68-브라질450A.indb 14 2009-03-17 오후 8:52:41

Connecting a PC
Using the D-Sub Cable
1. Connect a D-Sub Cable between PC IN [PC] jack on the TV and the PC output jack on your computer.
2. Connect a PC Audio Cable between the PC IN [AUDIO] jack on the TV and the Audio Out jack of the sound card on your
computer.
Using the HDMI/DVI Cable
1. Connect a HDMI/DVI cable between the HDMI IN 2(DVI) jack on the TV and the PC output jack on your computer.
2. Connect a 3.5 mm Stereo plug to 2RC A cable between the DVI IN (HDMI2) [R-AUDIO-L] jack on the TV and the Audio Out jack of
the sound card on your computer.
Each PC has a different back panel con guration.
When connecting a PC, match the color of the connection terminal to the cable.
When using an HDMI/DVI cable connection, you must use the HDMI IN 2(DVI) terminal.
❑
❑
N
N
N
English - 15
PC
PC Audio Cable (Not supplied)
D-Sub Cable (Not supplied)1
2
TV Rear Panel
TV Rear Panel
PC
3.5 mm Stereo plug to 2 RCA Cable (Not supplied)2
HDMI/DVI Cable (Not supplied)1
BN68-브라질450A.indb 15 2009-03-17 오후 8:52:43

Turning the TV On and Off
Press the POWER button on the remote control. You can also use the POWER button
on the TV.
It may take a while for your TV to power on.
Changing Channels
Using the Channel Buttons
Press the CH or CH button to change channels.
When you press the CH or CH button, the TV changes channels in
sequence. You will see all the channels that the TV has memorized. (The TV must
have memorized at least three channels). You will not see channels that were
either erased or not memorized. See page 20 to memorize channels.
Using the Number Buttons
Press the number buttons to go directly to a channel. For example, to select channel
“27”, press “2”, then “7”.
For quick channel change, press the number buttons, then press the ENTERE
button.
Using the “ ” Button
The “ ” button is used to select a channel over 100.
For example, to select a channel over 100, for channel 122, press “-”, then “2”, then “2”.
Using the PRE-CH Button to select the Previous Channel
1. Press the PRE-CH button. The TV will switch to the last channel viewed.
To quickly switch between two channels that are far apart, tune to one channel,
then use the number button to select the second channel. Then use the PRE-CH
button to quickly alternate between them.
Adjusting the Volume
Using the Volume Buttons
1. Press the VOL or VOL button to increase or decrease the volume.
Using the MUTE Button
At any time, you can cut off the sound using the MUTE button.
1. Press MUTE button and the sound cuts off.
The will displayed on the screen.
2. To turn mute off, press the MUTE button again, or simply press the VOL or
VOL button.
N
❑
N
❑
N
❑
❑
N
❑
❑
Operation
English - 16
BN68-브라질450A.indb 16 2009-03-17 오후 8:52:44

Using the TOOLS Button
You can use the TOOLS button to select your frequently used functions quickly and easily. The Tools menu changes
depending on which external input mode you are viewing.
1. Press the TOOLS button. The Tools menu will appear.
2. Press the ▲/▼ button to select a menu, then press the ENTER
E
button.
3. Press the ▲/▼/◄/►/ ENTER
E
buttons to display, change, or use the selected items.
For a more detailed description of each function, refer to the corresponding page.
Anynet+ (HDMI-CEC), see page 35
Picture Mode, see page 21
Sound Mode, see page 27
Sleep Timer, see page 32
SRS TS HD, see page 27
Energy Saving, see page 30
MTS, see page 27
PIP, see page 31
•
•
•
•
•
•
•
•
Viewing the Display
The display identifies the current channel and the status of certain audio-video
settings.
1. Press the INFO button on the remote control. The TV will display the channel, the type
of sound, and the status of certain picture and sound settings.
Press the INFO button once more or wait approximately 10 seconds and it disappears
automatically.
O
English - 17
TOOLS
Anynet+ (HDMI-CEC)
Picture Mode : Dynamic
Sound Mode : Standard
Sleep Timer : Off
SRS TS HD : Off
Energy Saving : Off
MTS : Stereo
Enter Exit
Move
Air 55
Mono
Picture : Dynamic
Sound : Standard
MTS : Stereo
SRS TS HD : Off
12 : 00 am
BN68-브라질450A.indb 17 2009-03-17 오후 8:52:45

Viewing the Menus
Before using the TV, follow the steps below to learn how to navigate the menu in order to select and adjust different functions.
1. Press the MENU button.
The main menu is displayed on the screen. Its left side has the following icons: Picture, Sound, Channel , Setup, Input.
2. Press the ▲ or ▼ button to select one of the icons.
Press the ◄ or ► button to access the icon’s sub-menu.
3. Press the ▲ or ▼ button to move to items in the menu.
Press the ENTER
E
button to enter items in the menu.
4. Press the ▲/▼/◄/► button to change the selected items.
Press the RETURN button to return to the previous menu.
5. Press the EXIT button to exit from the menu.
Using the remote control buttons
Button Operations Button Operations
MENU Display the main on-screen menu. ▲/▼/◄/► Move the cursor and select an item.
RETURN Return to the previous menu.
ENTERESelect the currently selected item.
Confirm the setting.
EXIT Exit the on-screen menu.
Example: Setting the TV’s Brightness in the Picture Menu
Adjusting the Brightness to 60
1. Press the MENU button to display the menu.
2. Press the ENTEREbutton to select Picture.
3. Press the ▲ or ▼ button to select Brightness.
4. Press the ENTEREbutton.
5. Press the ◄ or ► button until the Brightness changes to 60.
6. Press the ENTEREbutton.
Press the EXIT button to exit from the menu.
❑

N
Move Enter Exit
Mode : Standard
Cell Light 8
Contrast 95
Brightness 45
Sharpness 50
Color 50
Tint (G/R) G 50 R 50
Advanced Settings
Picture Options
Reset : OK
Picture
T V
Picture
Sound
Channel
Setup
Input
Move Enter Return
Mode : Standard
Cell Light 8
Contrast 95
Brightness 45
Sharpness 50
Color 50
Tint (G/R) G 50 R 50
Advanced Settings
Picture Options
Reset : OK
Picture
T V
Picture
Sound
Channel
Setup
Input
Move Enter Return
Mode : Standard
Cell Light 8
Contrast 95
Brightness 45
Sharpness 50
Color 50
Tint (G/R) G 50 R 50
Advanced Settings
Picture Options
Reset : OK
Picture
T V
Picture
Sound
Channel
Setup
Input
Move Adjust Return
Brightness 45
Move Adjust Return
Brightness 60
English - 18
BN68-브라질450A.indb 18 2009-03-17 오후 8:52:45

Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and subsequently.
The Screen Saver is activated if there is no remote control key input for longer than 1 minute while Plug & Play is running.
The Screen Saver is activated if there is no operating signal for longer than 15 minutes.
1. Press the POWER button on the remote control.
Language menu is displayed.
2. Select the appropriate language by pressing the ▲ or ▼ button. Press the ENTERE
button.
The message Select ‘Home Use’ when installing this TV in your home. is displayed.
3. Press the ◄ or ► button to select Store Demo or Home Use, then press the ENTERE
button.
We recommend setting the TV to Home Use mode for the best picture in your home
environment.
Store Demo mode is only intended for use in retail environments.
If the unit is accidentally set to Store Demo mode and you want to return to Home
Use (Standard): Press the Volume button on the TV. When the volume OSD is
displayed, press and hold the MENU button on the TV for 5 seconds.
4. The message Check antenna input. is displayed with OK selected. Press the ENTERE
button.
5. Press the ▲ or ▼ button to Air, STD, HRC, or IRC, then press the ENTEREbutton.
6. Press the ENTEREbutton to select Start. The TV will begin memorizing all of the
available channels.
To stop the search before it has nished, press the ENTEREbutton with Stop
selected.
7. Press the ◄ or ► button to select Month, Day, Year, Hour, Minute or am/pm. Set these
by pressing the ▲ or ▼ button.
8. Press the ENTERE button to conrm your setting. The message Enjoy your watching.
is displayed. When you have nished, press the ENTEREbutton.
Even if the ENTEREbutton is not pressed, the message will automatically disappear
after several seconds.
If you want to reset this feature...
1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup,
then press the ENTEREbutton.
2. Press the ENTEREbutton again to select Plug & Play. For further details on setting
up options.
The Plug & Play feature is only a vailable in the TV mode.
N
N
N
N
N
N
N
English - 19
Plug & Play
Move Enter Return
Language
English
Español
Português
Plug & Play
Move Enter
Skip
Air/Cable
Air
STD
HRC
IRC
Enjoy your watching.
OK
Move Enter Return
Setup
T V
Picture
Sound
Channel
Setup
Input
Plug & Play
Language : English
Time
Child Lock : On
Change PIN
Caption
Game Mode : Off 
Melody : Medium
Energy Saving : Off
AV Color System : Auto 
PIP 
Plug & Play
Enter
Skip
Air 51
Stop
Auto Program
BN68-브라질450A.indb 19 2009-03-17 오후 8:52:46

Storing Channels
Your TV can memorize and store all of the available channels for both air and cable channels. After the available channels
arememorized,usetheCH▲orCH▼buttontoscanthroughthechannels.Thiseliminatestheneedtochangechannelsby
entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the
channels and adding and deleting channels.
Air/Cable→Air/STD/HRC/IRC
Before your television can begin memorizing the available channels, you must specify
the type of signal source that is connected to the TV (i.e. an Air or a Cable system).
STD, HRC and IRC identify various types of cable TV systems. Contact your local
cable company to identify the type of cable system that exists in your particular area.
At this point the signal source has been selected.
Auto Program
The TV will begin memorizing all of the available channels. After all the available
channels are stored, the Auto program menu reappears.
All available channels are automatically stored in memory. It takes approximately
3 to 10 minutes to memorize channels.
If you want to stop Auto Programming, press the ENTER
E
button.
Fine Tune (Analog)
Use ne tuning to manually adjust a particular channel for optimal reception.
If you do not store the ne-tuned channel in memory, adjustments are not saved.
“*” will appear next to the name of ne-tuned channels.
To reset the ne tuning setting, press the ▼ button to select Reset, then press the
ENTER
E
button.
ColorSystem→Auto,PAL-M,PAL-N,NTSC
Normally the TV can receive image and sound with good quality in Auto mode. This mode detects the color signal
sources automatically. If the color implementation is unsatisfactory, select any of PAL-M, PAL-N or NTSC.
❑
N
❑
N
N
❑
N
N
N
❑
Channel Control
Managing Channels
Channel List
Using this menu, you can conveniently add/delete or lock/unlock channels.
Press the CH LIST button on the remote control to bring up the channel lists.
Adding / Deleting channels
Using the Channel List, you can add or delete channels.
Move to the ( ) eld by pressing the ▲/▼/◄/► buttons, select a channel to be
added, and press the ENTER
E
button to add the channel.
If you press the ENTER
E
button again, the (c) symbol next to the channel
disappears and the channel is not added.
Locking / Unlocking channels
This feature allows you to prevent unauthorized users, such as children, from watching
unsuitable programmes by muting out video and audio. This function is available only
when the Child Lock is set to on. (see page 29)
Move to the (\) eld by pressing the ▲/▼/◄/► buttons, select a channel to be
locked, and press the ENTER
E
button.
The PIN number input screen appears. Enter your 4 digit PIN number.
The default PIN number of a new TV set is 0-0-0-0. You can change the PIN, by
selecting Change PIN from the menu.
If you press the ENTER
E
button again, the (c) symbol next to the channel
disappears and the channel lock is canceled.
A blue screen is displayed when Child Lock is activated.
❑
O

N
N

N
N
N
N
N
English - 20
Move Enter Return
Channel
T V
Picture
Sound
Channel
Setup
Input
Air/Cable : Air
Auto Program
Channel List
Fine Tune
Color System : Auto
Fine Tune
Adjust Save Return
Reset
Air
0
55
Move Enter Return
Channel
T V
Picture
Sound
Channel
Setup
Input
Air/Cable : Air
Auto Program
Channel List
Fine Tune
Color System : Auto
Channel List
Air 55
6 / 7
Ch.
Air 52
Air 53
Air 54
Air 55 
Air 56
Air 57
Air 58
Air 59
Air 60
Air 61
Add Lock
Move Enter
Page Return
BN68-브라질450A.indb 20 2009-03-17 오후 8:52:47